From: Wong Vee Khee <vee.khee.wong@intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
Arnd Bergmann <arnd@arndb.de>,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Wei Feng <weifeng.voon@intel.com>,
Wong Vee Khee <vee.khee.wong@intel.com>
Subject: [PATCH net-next 2/3] net: stmmac: Fix incorrect location to set real_num_rx|tx_queues
Date: Thu, 10 Sep 2020 21:03:44 +0800 [thread overview]
Message-ID: <20200910130344.15013-1-vee.khee.wong@intel.com> (raw)
From: Aashish Verma <aashishx.verma@intel.com>
netif_set_real_num_tx_queues() & netif_set_real_num_rx_queues() should be
used to inform network stack about the real Tx & Rx queue (active) number
in both stmmac_open() and stmmac_resume(), therefore, we move the code
from stmmac_dvr_probe() to stmmac_hw_setup().
Fixes: c02b7a914551 net: stmmac: use netif_set_real_num_{rx,tx}_queues
Signed-off-by: Aashish Verma <aashishx.verma@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 9302d8012a10..fea3b77892ab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2733,6 +2733,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
stmmac_enable_tbs(priv, priv->ioaddr, enable, chan);
}
+ /* Configure real RX and TX queues */
+ netif_set_real_num_rx_queues(dev, priv->plat->rx_queues_to_use);
+ netif_set_real_num_tx_queues(dev, priv->plat->tx_queues_to_use);
+
/* Start the ball rolling... */
stmmac_start_all_dma(priv);
@@ -4883,10 +4887,6 @@ int stmmac_dvr_probe(struct device *device,
stmmac_check_ether_addr(priv);
- /* Configure real RX and TX queues */
- netif_set_real_num_rx_queues(ndev, priv->plat->rx_queues_to_use);
- netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use);
-
ndev->netdev_ops = &stmmac_netdev_ops;
ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
--
2.17.0
next reply other threads:[~2020-09-10 21:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 13:03 Wong Vee Khee [this message]
2020-09-15 1:28 [PATCH net-next 0/3] net: stmmac: Add ethtool support for get|set channels Wong Vee Khee
2020-09-15 1:28 ` [PATCH net-next 2/3] net: stmmac: Fix incorrect location to set real_num_rx|tx_queues Wong Vee Khee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200910130344.15013-1-vee.khee.wong@intel.com \
--to=vee.khee.wong@intel.com \
--cc=Joao.Pinto@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=arnd@arndb.de \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®