Re: [PATCH 1/2] extcon: ptn5150: Use defines for registers

[Krzysztof Kozlowski <krzk@kernel.org>]

On Fri, Sep 11, 2020 at 05:03:02PM +0900, Chanwoo Choi wrote:
> On 9/11/20 2:38 PM, Krzysztof Kozlowski wrote:
> > On Fri, Sep 11, 2020 at 12:14:19PM +0900, Chanwoo Choi wrote:
> >> On 9/10/20 12:01 AM, Krzysztof Kozlowski wrote:
> >>> The register addresses are not continuous, so use simple defines for
> >>> them.  This also makes it easier to find the address for register.
> >>>
> >>> No functional change.
> >>>
> >>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >>> ---
> >>>  drivers/extcon/extcon-ptn5150.c | 22 ++++++++++------------
> >>>  1 file changed, 10 insertions(+), 12 deletions(-)
> >>>
> >>> diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
> >>> index dda5b3a3a908..1b68f56d8372 100644
> >>> --- a/drivers/extcon/extcon-ptn5150.c
> >>> +++ b/drivers/extcon/extcon-ptn5150.c
> >>> @@ -19,18 +19,16 @@
> >>>  #include <linux/gpio/consumer.h>
> >>>  
> >>>  /* PTN5150 registers */
> >>> -enum ptn5150_reg {
> >>> -	PTN5150_REG_DEVICE_ID = 0x01,
> >>> -	PTN5150_REG_CONTROL,
> >>> -	PTN5150_REG_INT_STATUS,
> >>> -	PTN5150_REG_CC_STATUS,
> >>> -	PTN5150_REG_CON_DET = 0x09,
> >>> -	PTN5150_REG_VCONN_STATUS,
> >>> -	PTN5150_REG_RESET,
> >>> -	PTN5150_REG_INT_MASK = 0x18,
> >>> -	PTN5150_REG_INT_REG_STATUS,
> >>> -	PTN5150_REG_END,
> >>> -};
> >>> +#define PTN5150_REG_DEVICE_ID			0x01
> >>> +#define PTN5150_REG_CONTROL			0x02
> >>> +#define PTN5150_REG_INT_STATUS			0x03
> >>> +#define PTN5150_REG_CC_STATUS			0x04
> >>> +#define PTN5150_REG_CON_DET			0x09
> >>> +#define PTN5150_REG_VCONN_STATUS		0x0a
> >>> +#define PTN5150_REG_RESET			0x0b
> >>> +#define PTN5150_REG_INT_MASK			0x18
> >>> +#define PTN5150_REG_INT_REG_STATUS		0x19
> >>> +#define PTN5150_REG_END				PTN5150_REG_INT_REG_STATUS
> >>
> >> PTN5150_REG_END should be (PTN5150_REG_INT_REG_STATUS + 1)
> >> for regmap operation of PTN5150_REG_INT_REG_STATUS.
> > 
> > Why? This goes to regmap's max_register which is the last register
> > allowed to read:
> > 
> >   drivers/base/regmap/regmap-debugfs.c:   for (i = 0; i <= map->max_register; i += map->reg_stride) {
> >   drivers/base/regmap/regmap.c:   if (map->max_register && reg > map->max_register)
> 
> It is my mismake. You're right.
> Applied them. Thanks.

Great, thank you!

Best regards,
Krzysztof