mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
	<boris.brezillon@collabora.com>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>
Subject: [PATCH 2/3] mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
Date: Thu, 17 Sep 2020 10:52:12 +0300	[thread overview]
Message-ID: <20200917075213.532161-3-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20200917075213.532161-1-tudor.ambarus@microchip.com>

There were too many levels of indentation and the code was
hard to read. Introduce a new function, similar to
nand_set_ecc_soft_ops().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/nand/raw/nand_base.c | 114 +++++++++++++++++--------------
 1 file changed, 61 insertions(+), 53 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index bd30f6632fe2..d3e0ca66382f 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5139,6 +5139,65 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
 	kfree(chip->parameters.onfi);
 }
 
+static int nand_set_ecc_on_host_ops(struct nand_chip *chip)
+{
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	switch (ecc->placement) {
+	case NAND_ECC_PLACEMENT_UNKNOWN:
+	case NAND_ECC_PLACEMENT_OOB:
+		/* Use standard hwecc read page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_hwecc;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_std;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_std;
+		if (!ecc->read_subpage)
+			ecc->read_subpage = nand_read_subpage;
+		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+			ecc->write_subpage = nand_write_subpage_hwecc;
+		fallthrough;
+
+	case NAND_ECC_PLACEMENT_INTERLEAVED:
+		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+		    (!ecc->read_page ||
+		     ecc->read_page == nand_read_page_hwecc ||
+		     !ecc->write_page ||
+		     ecc->write_page == nand_write_page_hwecc)) {
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			return -EINVAL;
+		}
+		/* Use standard syndrome read/write page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_syndrome;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_syndrome;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw_syndrome;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw_syndrome;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_syndrome;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_syndrome;
+		break;
+
+	default:
+		pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
+			ecc->placement);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
@@ -5619,60 +5678,9 @@ static int nand_scan_tail(struct nand_chip *chip)
 
 	switch (ecc->engine_type) {
 	case NAND_ECC_ENGINE_TYPE_ON_HOST:
-
-		switch (ecc->placement) {
-		case NAND_ECC_PLACEMENT_UNKNOWN:
-		case NAND_ECC_PLACEMENT_OOB:
-			/* Use standard hwecc read page function? */
-			if (!ecc->read_page)
-				ecc->read_page = nand_read_page_hwecc;
-			if (!ecc->write_page)
-				ecc->write_page = nand_write_page_hwecc;
-			if (!ecc->read_page_raw)
-				ecc->read_page_raw = nand_read_page_raw;
-			if (!ecc->write_page_raw)
-				ecc->write_page_raw = nand_write_page_raw;
-			if (!ecc->read_oob)
-				ecc->read_oob = nand_read_oob_std;
-			if (!ecc->write_oob)
-				ecc->write_oob = nand_write_oob_std;
-			if (!ecc->read_subpage)
-				ecc->read_subpage = nand_read_subpage;
-			if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
-				ecc->write_subpage = nand_write_subpage_hwecc;
-			fallthrough;
-
-		case NAND_ECC_PLACEMENT_INTERLEAVED:
-			if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
-			    (!ecc->read_page ||
-			     ecc->read_page == nand_read_page_hwecc ||
-			     !ecc->write_page ||
-			     ecc->write_page == nand_write_page_hwecc)) {
-				WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
-				ret = -EINVAL;
-				goto err_nand_manuf_cleanup;
-			}
-			/* Use standard syndrome read/write page function? */
-			if (!ecc->read_page)
-				ecc->read_page = nand_read_page_syndrome;
-			if (!ecc->write_page)
-				ecc->write_page = nand_write_page_syndrome;
-			if (!ecc->read_page_raw)
-				ecc->read_page_raw = nand_read_page_raw_syndrome;
-			if (!ecc->write_page_raw)
-				ecc->write_page_raw = nand_write_page_raw_syndrome;
-			if (!ecc->read_oob)
-				ecc->read_oob = nand_read_oob_syndrome;
-			if (!ecc->write_oob)
-				ecc->write_oob = nand_write_oob_syndrome;
-			break;
-
-		default:
-			pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
-				ecc->placement);
-			ret = -EINVAL;
+		ret = nand_set_ecc_on_host_ops(chip);
+		if (ret)
 			goto err_nand_manuf_cleanup;
-		}
 
 		if (mtd->writesize >= ecc->size) {
 			if (!ecc->strength) {
-- 
2.25.1


  parent reply	other threads:[~2020-09-17  8:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-17  7:52 [PATCH 0/3] mtd: rawnand: Fix HW ECC handling Tudor Ambarus
2020-09-17  7:52 ` [PATCH 1/3] mtd: rawnand: Fix wrongful fallthrough NAND_ECC_SOFT Tudor Ambarus
2020-09-28 15:00   ` Miquel Raynal
2020-09-17  7:52 ` Tudor Ambarus [this message]
2020-09-28 15:00   ` [PATCH 2/3] mtd: rawnand: Introduce nand_set_ecc_on_host_ops() Miquel Raynal
2020-09-17  7:52 ` [PATCH 3/3] mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() Tudor Ambarus
2020-09-28 15:00   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200917075213.532161-3-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®