From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megous@megous.com>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH 01/25] ASoC: sun8i-codec: Set up clock tree at probe time
Date: Wed, 30 Sep 2020 21:11:24 -0500 [thread overview]
Message-ID: <20201001021148.15852-2-samuel@sholland.org> (raw)
In-Reply-To: <20201001021148.15852-1-samuel@sholland.org>
The sun8i codec is effectively an on-die variant of the X-Powers AC100
codec. The AC100 can derive its clocks from either of two I2S master
clocks or an internal PLL. For the on-die variant, Allwinner replaced
the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and
they connected both I2S MCLK inputs to the same source -- which happens
to be an integer divider from the same PLL_AUDIO.
So there's actually no clocking flexibility. To run SYSCLK at the
required rate, it must be run straight from the PLL. The only choice is
whether it goes through AIF1CLK or AIF2CLK. Since both run at the same
rate, the only effect of that choice is which field in SYS_SR_CTRL
(AIF1_FS or AIF2_FS) controls the system sample rate.
Since AIFnCLK is required to bring up the corresponding DAI, and AIF1
(connected to the CPU) is used most often, let's use AIF1CLK as the
SYSCLK parent. That means we no longer need to set AIF2_FS.
Since this clock tree never changes, we can program it from the
component probe function, instead of using DAPM widgets. The DAPM
widgets unnecessarily change clock parents when the codec goes in/out
of idle and the supply widgets are powered up/down.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
sound/soc/sunxi/sun8i-codec.c | 54 +++++++++++++++++++++++------------
1 file changed, 35 insertions(+), 19 deletions(-)
diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 178f6fb31fd4..407f0fedc4ed 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -19,20 +19,23 @@
#include <linux/log2.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#define SUN8I_SYSCLK_CTL 0x00c
#define SUN8I_SYSCLK_CTL_AIF1CLK_ENA 11
-#define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_PLL 9
-#define SUN8I_SYSCLK_CTL_AIF1CLK_SRC 8
+#define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_PLL (0x2 << 8)
+#define SUN8I_SYSCLK_CTL_AIF2CLK_ENA 7
+#define SUN8I_SYSCLK_CTL_AIF2CLK_SRC_PLL (0x2 << 4)
#define SUN8I_SYSCLK_CTL_SYSCLK_ENA 3
#define SUN8I_SYSCLK_CTL_SYSCLK_SRC 0
+#define SUN8I_SYSCLK_CTL_SYSCLK_SRC_AIF1CLK (0x0 << 0)
+#define SUN8I_SYSCLK_CTL_SYSCLK_SRC_AIF2CLK (0x1 << 0)
#define SUN8I_MOD_CLK_ENA 0x010
#define SUN8I_MOD_CLK_ENA_AIF1 15
#define SUN8I_MOD_CLK_ENA_ADC 3
#define SUN8I_MOD_CLK_ENA_DAC 2
#define SUN8I_MOD_RST_CTL 0x014
#define SUN8I_MOD_RST_CTL_AIF1 15
#define SUN8I_MOD_RST_CTL_ADC 3
#define SUN8I_MOD_RST_CTL_DAC 2
@@ -74,16 +77,18 @@
#define SUN8I_DAC_MXR_SRC_DACL_MXR_SRC_AIF1DA1L 14
#define SUN8I_DAC_MXR_SRC_DACL_MXR_SRC_AIF2DACL 13
#define SUN8I_DAC_MXR_SRC_DACL_MXR_SRC_ADCL 12
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF1DA0R 11
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF1DA1R 10
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_AIF2DACR 9
#define SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_ADCR 8
+#define SUN8I_SYSCLK_CTL_AIF1CLK_SRC_MASK GENMASK(9, 8)
+#define SUN8I_SYSCLK_CTL_AIF2CLK_SRC_MASK GENMASK(5, 4)
#define SUN8I_SYS_SR_CTRL_AIF1_FS_MASK GENMASK(15, 12)
#define SUN8I_SYS_SR_CTRL_AIF2_FS_MASK GENMASK(11, 8)
#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK GENMASK(12, 9)
#define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK GENMASK(8, 6)
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK GENMASK(5, 4)
#define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT_MASK GENMASK(3, 2)
struct sun8i_codec_quirks {
@@ -318,19 +323,16 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
sample_rate = sun8i_codec_get_hw_rate(params);
if (sample_rate < 0)
return sample_rate;
regmap_update_bits(scodec->regmap, SUN8I_SYS_SR_CTRL,
SUN8I_SYS_SR_CTRL_AIF1_FS_MASK,
sample_rate << SUN8I_SYS_SR_CTRL_AIF1_FS);
- regmap_update_bits(scodec->regmap, SUN8I_SYS_SR_CTRL,
- SUN8I_SYS_SR_CTRL_AIF2_FS_MASK,
- sample_rate << SUN8I_SYS_SR_CTRL_AIF2_FS);
return 0;
}
static const struct snd_kcontrol_new sun8i_dac_mixer_controls[] = {
SOC_DAPM_DOUBLE("AIF1 Slot 0 Digital DAC Playback Switch",
SUN8I_DAC_MXR_SRC,
SUN8I_DAC_MXR_SRC_DACL_MXR_SRC_AIF1DA0L,
@@ -361,18 +363,26 @@ static const struct snd_kcontrol_new sun8i_input_mixer_controls[] = {
SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_ADCR, 1, 0),
SOC_DAPM_DOUBLE("AIF2 Inv Digital ADC Capture Switch",
SUN8I_AIF1_MXR_SRC,
SUN8I_AIF1_MXR_SRC_AD0L_MXR_SRC_AIF2DACR,
SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF2DACL, 1, 0),
};
static const struct snd_soc_dapm_widget sun8i_codec_dapm_widgets[] = {
+ /* System Clocks */
SND_SOC_DAPM_CLOCK_SUPPLY("mod"),
+ SND_SOC_DAPM_SUPPLY("AIF1CLK",
+ SUN8I_SYSCLK_CTL,
+ SUN8I_SYSCLK_CTL_AIF1CLK_ENA, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("SYSCLK",
+ SUN8I_SYSCLK_CTL,
+ SUN8I_SYSCLK_CTL_SYSCLK_ENA, 0, NULL, 0),
+
/* Digital parts of the DACs and ADC */
SND_SOC_DAPM_SUPPLY("DAC", SUN8I_DAC_DIG_CTRL, SUN8I_DAC_DIG_CTRL_ENDA,
0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC", SUN8I_ADC_DIG_CTRL, SUN8I_ADC_DIG_CTRL_ENAD,
0, NULL, 0),
/* AIF "DAC" Inputs */
SND_SOC_DAPM_AIF_IN("AIF1 DA0L", "Playback", 0,
@@ -410,44 +420,33 @@ static const struct snd_soc_dapm_widget sun8i_codec_dapm_widgets[] = {
/* Clocks */
SND_SOC_DAPM_SUPPLY("MODCLK AIF1", SUN8I_MOD_CLK_ENA,
SUN8I_MOD_CLK_ENA_AIF1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MODCLK DAC", SUN8I_MOD_CLK_ENA,
SUN8I_MOD_CLK_ENA_DAC, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MODCLK ADC", SUN8I_MOD_CLK_ENA,
SUN8I_MOD_CLK_ENA_ADC, 0, NULL, 0),
- SND_SOC_DAPM_SUPPLY("AIF1", SUN8I_SYSCLK_CTL,
- SUN8I_SYSCLK_CTL_AIF1CLK_ENA, 0, NULL, 0),
- SND_SOC_DAPM_SUPPLY("SYSCLK", SUN8I_SYSCLK_CTL,
- SUN8I_SYSCLK_CTL_SYSCLK_ENA, 0, NULL, 0),
-
- SND_SOC_DAPM_SUPPLY("AIF1 PLL", SUN8I_SYSCLK_CTL,
- SUN8I_SYSCLK_CTL_AIF1CLK_SRC_PLL, 0, NULL, 0),
- /* Inversion as 0=AIF1, 1=AIF2 */
- SND_SOC_DAPM_SUPPLY("SYSCLK AIF1", SUN8I_SYSCLK_CTL,
- SUN8I_SYSCLK_CTL_SYSCLK_SRC, 1, NULL, 0),
/* Module reset */
SND_SOC_DAPM_SUPPLY("RST AIF1", SUN8I_MOD_RST_CTL,
SUN8I_MOD_RST_CTL_AIF1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("RST DAC", SUN8I_MOD_RST_CTL,
SUN8I_MOD_RST_CTL_DAC, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("RST ADC", SUN8I_MOD_RST_CTL,
SUN8I_MOD_RST_CTL_ADC, 0, NULL, 0),
};
static const struct snd_soc_dapm_route sun8i_codec_dapm_routes[] = {
/* Clock Routes */
- { "AIF1", NULL, "mod" },
+ { "AIF1CLK", NULL, "mod" },
- { "AIF1", NULL, "SYSCLK AIF1" },
- { "AIF1 PLL", NULL, "AIF1" },
- { "SYSCLK", NULL, "AIF1 PLL" },
+ { "SYSCLK", NULL, "AIF1CLK" },
+ { "RST AIF1", NULL, "AIF1CLK" },
{ "RST AIF1", NULL, "SYSCLK" },
{ "MODCLK AIF1", NULL, "RST AIF1" },
{ "AIF1 AD0L", NULL, "MODCLK AIF1" },
{ "AIF1 AD0R", NULL, "MODCLK AIF1" },
{ "AIF1 DA0L", NULL, "MODCLK AIF1" },
{ "AIF1 DA0R", NULL, "MODCLK AIF1" },
{ "RST DAC", NULL, "SYSCLK" },
@@ -519,16 +518,33 @@ static int sun8i_codec_component_probe(struct snd_soc_component *component)
return ret;
ret = snd_soc_dapm_add_routes(dapm, sun8i_codec_legacy_routes,
ARRAY_SIZE(sun8i_codec_legacy_routes));
if (ret)
return ret;
}
+ /*
+ * AIF1CLK and AIF2CLK share a pair of clock parents: PLL_AUDIO ("mod")
+ * and MCLK (from the CPU DAI connected to AIF1). MCLK's parent is also
+ * PLL_AUDIO, so using it adds no additional flexibility. Use PLL_AUDIO
+ * directly to simplify the clock tree.
+ */
+ regmap_update_bits(scodec->regmap, SUN8I_SYSCLK_CTL,
+ SUN8I_SYSCLK_CTL_AIF1CLK_SRC_MASK |
+ SUN8I_SYSCLK_CTL_AIF2CLK_SRC_MASK,
+ SUN8I_SYSCLK_CTL_AIF1CLK_SRC_PLL |
+ SUN8I_SYSCLK_CTL_AIF2CLK_SRC_PLL);
+
+ /* Use AIF1CLK as the SYSCLK parent since AIF1 is used most often. */
+ regmap_update_bits(scodec->regmap, SUN8I_SYSCLK_CTL,
+ BIT(SUN8I_SYSCLK_CTL_SYSCLK_SRC),
+ SUN8I_SYSCLK_CTL_SYSCLK_SRC_AIF1CLK);
+
return 0;
}
static const struct snd_soc_dai_ops sun8i_codec_dai_ops = {
.hw_params = sun8i_codec_hw_params,
.set_fmt = sun8i_set_fmt,
};
--
2.26.2
next prev parent reply other threads:[~2020-10-01 2:12 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 2:11 [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Samuel Holland
2020-10-01 2:11 ` Samuel Holland [this message]
2020-10-05 9:53 ` [PATCH 01/25] ASoC: sun8i-codec: Set up clock tree at probe time Maxime Ripard
2020-10-01 2:11 ` [PATCH 02/25] ASoC: sun8i-codec: Swap module clock/reset dependencies Samuel Holland
2020-10-05 9:54 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 03/25] ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes Samuel Holland
2020-10-05 9:54 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 04/25] ASoC: sun8i-codec: Consistently name DAPM widgets " Samuel Holland
2020-10-05 9:57 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 05/25] ASoC: sun8i-codec: Correct DAPM widget types Samuel Holland
2020-10-05 9:57 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 06/25] ASoC: sun8i-codec: Fix AIF widget channel references Samuel Holland
2020-10-05 10:00 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 07/25] ASoC: sun8i-codec: Enable AIF mono/stereo control Samuel Holland
2020-10-05 10:00 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 08/25] ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata Samuel Holland
2020-10-05 10:01 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 09/25] ASoC: sun8i-codec: Prepare to extend the DAI driver Samuel Holland
2020-10-05 11:24 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 10/25] ASoC: sun8i-codec: Program format before clock inversion Samuel Holland
2020-10-05 11:26 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 11/25] ASoC: sun8i-codec: Enable all supported clock inversions Samuel Holland
2020-10-05 11:30 ` Maxime Ripard
2020-10-06 4:29 ` Samuel Holland
2020-10-08 12:59 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 12/25] ASoC: sun8i-codec: Program the correct word size Samuel Holland
2020-10-05 11:30 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 13/25] ASoC: sun8i-codec: Round up the LRCK divisor Samuel Holland
2020-10-05 11:31 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation Samuel Holland
2020-10-05 11:34 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 15/25] ASoC: sun8i-codec: Support the TDM slot binding Samuel Holland
2020-10-05 11:34 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 16/25] ASoC: sun8i-codec: Enforce symmetric DAI parameters Samuel Holland
2020-10-05 11:39 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 17/25] ASoC: sun8i-codec: Enable all supported sample rates Samuel Holland
2020-10-05 11:39 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 18/25] ASoC: sun8i-codec: Automatically set the system sample rate Samuel Holland
2020-10-05 11:58 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 19/25] ASoC: sun8i-codec: Constrain to compatible sample rates Samuel Holland
2020-10-05 11:59 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 20/25] ASoC: sun8i-codec: Protect the clock rate while streams are open Samuel Holland
2020-10-01 13:27 ` kernel test robot
2020-10-05 12:01 ` Maxime Ripard
2020-10-05 13:15 ` Chen-Yu Tsai
2020-10-06 4:46 ` Samuel Holland
2020-10-06 4:43 ` Samuel Holland
2020-10-08 13:02 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 21/25] ASoC: sun8i-codec: Require an exact BCLK divisor match Samuel Holland
2020-10-05 12:01 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 22/25] ASoC: sun8i-codec: Enable all supported PCM formats Samuel Holland
2020-10-05 12:02 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 23/25] ASoC: sun8i-codec: Generalize AIF clock control Samuel Holland
2020-10-05 12:04 ` Maxime Ripard
2020-10-06 4:51 ` Samuel Holland
2020-10-12 11:17 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 24/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2 Samuel Holland
2020-10-05 12:05 ` Maxime Ripard
2020-10-01 2:11 ` [PATCH 25/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3 Samuel Holland
2020-10-05 17:54 ` [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001021148.15852-2-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=megous@megous.com \
--cc=mripard@kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®