From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>,
x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Ingo Molnar <mingo@redhat.com>,
linux-kernel@vger.kernel.org,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Joerg Roedel <joro@8bytes.org>,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v7 3/4] KVM: x86: allow kvm_x86_ops.set_efer to return an error value
Date: Thu, 1 Oct 2020 14:29:53 +0300 [thread overview]
Message-ID: <20201001112954.6258-4-mlevitsk@redhat.com> (raw)
In-Reply-To: <20201001112954.6258-1-mlevitsk@redhat.com>
This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/include/asm/kvm_host.h | 2 +-
arch/x86/kvm/svm/svm.c | 3 ++-
arch/x86/kvm/svm/svm.h | 2 +-
arch/x86/kvm/vmx/vmx.c | 6 ++++--
arch/x86/kvm/x86.c | 7 ++++++-
5 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index d0f77235da923..99657051ee8a0 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1086,7 +1086,7 @@ struct kvm_x86_ops {
void (*get_cs_db_l_bits)(struct kvm_vcpu *vcpu, int *db, int *l);
void (*set_cr0)(struct kvm_vcpu *vcpu, unsigned long cr0);
int (*set_cr4)(struct kvm_vcpu *vcpu, unsigned long cr4);
- void (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
+ int (*set_efer)(struct kvm_vcpu *vcpu, u64 efer);
void (*get_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
void (*set_idt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 4f401fc6a05d9..57e0f27ff7d20 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -263,7 +263,7 @@ static int get_max_npt_level(void)
#endif
}
-void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+int svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
struct vcpu_svm *svm = to_svm(vcpu);
vcpu->arch.efer = efer;
@@ -283,6 +283,7 @@ void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer)
svm->vmcb->save.efer = efer | EFER_SVME;
vmcb_mark_dirty(svm->vmcb, VMCB_CR);
+ return 0;
}
static int is_external_interrupt(u32 info)
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index a7f997459b870..e7af21e6fe1e0 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -350,7 +350,7 @@ static inline bool gif_set(struct vcpu_svm *svm)
#define MSR_INVALID 0xffffffffU
u32 svm_msrpm_offset(u32 msr);
-void svm_set_efer(struct kvm_vcpu *vcpu, u64 efer);
+int svm_set_efer(struct kvm_vcpu *vcpu, u64 efer);
void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
int svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
void svm_flush_tlb(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 4551a7e80ebc3..2115d35094bc5 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2815,13 +2815,14 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
kvm_mmu_reset_context(vcpu);
}
-void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
+int vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
struct vmx_uret_msr *msr = vmx_find_uret_msr(vmx, MSR_EFER);
+ /* Nothing to do if hardware doesn't support EFER. */
if (!msr)
- return;
+ return 0;
vcpu->arch.efer = efer;
if (efer & EFER_LMA) {
@@ -2833,6 +2834,7 @@ void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
msr->data = efer & ~EFER_LME;
}
setup_msrs(vmx);
+ return 0;
}
#ifdef CONFIG_X86_64
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7af04f9e20b48..80e3dcd542382 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1457,6 +1457,7 @@ static int set_efer(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
{
u64 old_efer = vcpu->arch.efer;
u64 efer = msr_info->data;
+ int r;
if (efer & efer_reserved_bits)
return 1;
@@ -1473,7 +1474,11 @@ static int set_efer(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
efer &= ~EFER_LMA;
efer |= vcpu->arch.efer & EFER_LMA;
- kvm_x86_ops.set_efer(vcpu, efer);
+ r = kvm_x86_ops.set_efer(vcpu, efer);
+ if (r) {
+ WARN_ON(r > 0);
+ return r;
+ }
/* Update reserved bits */
if ((efer ^ old_efer) & EFER_NX)
--
2.26.2
next prev parent reply other threads:[~2020-10-01 11:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 11:29 [PATCH v7 0/4] KVM: nSVM: ondemand nested state allocation Maxim Levitsky
2020-10-01 11:29 ` [PATCH v7 1/4] KVM: x86: xen_hvm_config: cleanup return values Maxim Levitsky
2020-10-01 11:29 ` [PATCH v7 2/4] KVM: x86: report negative values from wrmsr emulation to userspace Maxim Levitsky
2020-10-01 11:29 ` Maxim Levitsky [this message]
2020-10-01 11:29 ` [PATCH v7 4/4] KVM: nSVM: implement on demand allocation of the nested state Maxim Levitsky
2020-10-19 15:52 ` [PATCH v7 0/4] KVM: nSVM: ondemand nested state allocation Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001112954.6258-4-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®