From: Xie He <xie.he.0141@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Halasa <khc@pm.waw.pl>,
Stephen Hemminger <stephen@networkplumber.org>
Cc: Xie He <xie.he.0141@gmail.com>
Subject: [PATCH net-next] drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit
Date: Sat, 3 Oct 2020 15:41:05 -0700 [thread overview]
Message-ID: <20201003224105.74234-1-xie.he.0141@gmail.com> (raw)
1. Keep the code for the normal (non-error) flow at the lowest
indentation level. And use "goto drop" for all error handling.
2. Replace code that pads short Ethernet frames with a "__skb_pad" call.
3. Change "dev_kfree_skb" to "kfree_skb" in error handling code.
"kfree_skb" is the correct function to call when dropping an skb due to
an error. "dev_kfree_skb", which is an alias of "consume_skb", is for
dropping skbs normally (not due to an error).
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
---
drivers/net/wan/hdlc_fr.c | 54 +++++++++++++++++++--------------------
1 file changed, 26 insertions(+), 28 deletions(-)
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 3a44dad87602..4dfdbca54296 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -416,38 +416,36 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct pvc_device *pvc = dev->ml_priv;
- if (pvc->state.active) {
- if (dev->type == ARPHRD_ETHER) {
- int pad = ETH_ZLEN - skb->len;
- if (pad > 0) { /* Pad the frame with zeros */
- int len = skb->len;
- if (skb_tailroom(skb) < pad)
- if (pskb_expand_head(skb, 0, pad,
- GFP_ATOMIC)) {
- dev->stats.tx_dropped++;
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
- skb_put(skb, pad);
- memset(skb->data + len, 0, pad);
- }
- }
- skb->dev = dev;
- if (!fr_hard_header(&skb, pvc->dlci)) {
- dev->stats.tx_bytes += skb->len;
- dev->stats.tx_packets++;
- if (pvc->state.fecn) /* TX Congestion counter */
- dev->stats.tx_compressed++;
- skb->dev = pvc->frad;
- skb->protocol = htons(ETH_P_HDLC);
- skb_reset_network_header(skb);
- dev_queue_xmit(skb);
- return NETDEV_TX_OK;
+ if (!pvc->state.active)
+ goto drop;
+
+ if (dev->type == ARPHRD_ETHER) {
+ int pad = ETH_ZLEN - skb->len;
+
+ if (pad > 0) { /* Pad the frame with zeros */
+ if (__skb_pad(skb, pad, false))
+ goto drop;
+ skb_put(skb, pad);
}
}
+ skb->dev = dev;
+ if (fr_hard_header(&skb, pvc->dlci))
+ goto drop;
+
+ dev->stats.tx_bytes += skb->len;
+ dev->stats.tx_packets++;
+ if (pvc->state.fecn) /* TX Congestion counter */
+ dev->stats.tx_compressed++;
+ skb->dev = pvc->frad;
+ skb->protocol = htons(ETH_P_HDLC);
+ skb_reset_network_header(skb);
+ dev_queue_xmit(skb);
+ return NETDEV_TX_OK;
+
+drop:
dev->stats.tx_dropped++;
- dev_kfree_skb(skb);
+ kfree_skb(skb);
return NETDEV_TX_OK;
}
--
2.25.1
next reply other threads:[~2020-10-03 22:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-03 22:41 Xie He [this message]
2020-10-04 22:12 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201003224105.74234-1-xie.he.0141@gmail.com \
--to=xie.he.0141@gmail.com \
--cc=davem@davemloft.net \
--cc=khc@pm.waw.pl \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®