mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Elaine Zhang <zhangqing@rock-chips.com>
To: heiko@sntech.de
Cc: mturquette@baylibre.com, sboyd@kernel.org,
	linux-clk@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org, xxx@rock-chips.com,
	xf@rock-chips.com, huangtao@rock-chips.com,
	kever.yang@rock-chips.com,
	Elaine Zhang <zhangqing@rock-chips.com>
Subject: [PATCH v4 4/5] clk: rockchip: add pll up and down when change pll freq
Date: Wed, 14 Oct 2020 10:28:11 +0800	[thread overview]
Message-ID: <20201014022812.6733-5-zhangqing@rock-chips.com> (raw)
In-Reply-To: <20201014022812.6733-1-zhangqing@rock-chips.com>

set pll sequence:
        ->set pll to slow mode or other plls
        ->set pll down
        ->set pll params
        ->set pll up
        ->wait pll lock status
        ->set pll to normal mode

To slove the system error:
wait_pll_lock: timeout waiting for pll to lock
pll_set_params: pll update unsucessful,
                trying to restore old params

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/clk/rockchip/clk-pll.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index 4c6c9167ef50..8adc6f54a605 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -210,6 +210,11 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
 		rate_change_remuxed = 1;
 	}
 
+	/* set pll power down */
+	writel(HIWORD_UPDATE(RK3036_PLLCON1_PWRDOWN,
+			     RK3036_PLLCON1_PWRDOWN, 0),
+	       pll->reg_base + RK3036_PLLCON(1));
+
 	/* update pll values */
 	writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3036_PLLCON0_FBDIV_MASK,
 					  RK3036_PLLCON0_FBDIV_SHIFT) |
@@ -231,6 +236,11 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
 	pllcon |= rate->frac << RK3036_PLLCON2_FRAC_SHIFT;
 	writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
 
+	/* set pll power up */
+	writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
+	       pll->reg_base + RK3036_PLLCON(1));
+	udelay(1);
+
 	/* wait for the pll to lock */
 	ret = rockchip_rk3036_pll_wait_lock(pll);
 	if (ret) {
@@ -692,6 +702,11 @@ static int rockchip_rk3399_pll_set_params(struct rockchip_clk_pll *pll,
 		rate_change_remuxed = 1;
 	}
 
+	/* set pll power down */
+	writel(HIWORD_UPDATE(RK3399_PLLCON3_PWRDOWN,
+			     RK3399_PLLCON3_PWRDOWN, 0),
+	       pll->reg_base + RK3399_PLLCON(3));
+
 	/* update pll values */
 	writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3399_PLLCON0_FBDIV_MASK,
 						  RK3399_PLLCON0_FBDIV_SHIFT),
@@ -715,6 +730,12 @@ static int rockchip_rk3399_pll_set_params(struct rockchip_clk_pll *pll,
 					    RK3399_PLLCON3_DSMPD_SHIFT),
 		       pll->reg_base + RK3399_PLLCON(3));
 
+	/* set pll power up */
+	writel(HIWORD_UPDATE(0,
+			     RK3399_PLLCON3_PWRDOWN, 0),
+	       pll->reg_base + RK3399_PLLCON(3));
+	udelay(1);
+
 	/* wait for the pll to lock */
 	ret = rockchip_rk3399_pll_wait_lock(pll);
 	if (ret) {
-- 
2.17.1




  parent reply	other threads:[~2020-10-14  2:35 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-14  2:28 [PATCH v4 0/5] clk: rockchip: Support for some new features Elaine Zhang
2020-10-14  2:28 ` [PATCH v4 1/5] clk: rockchip: Add supprot to limit input rate for fractional divider Elaine Zhang
2020-10-14  2:28 ` [PATCH v4 2/5] clk: rockchip: fix up the frac clk get rate error Elaine Zhang
2020-10-14  2:28 ` [PATCH v4 3/5] clk: rockchip: add a clock-type for muxes based in the pmugrf Elaine Zhang
2020-10-14  2:28 ` Elaine Zhang [this message]
2020-10-14  2:28 ` [PATCH v4 5/5] clk: rockchip: support pll setting by auto Elaine Zhang
  -- strict thread matches above, loose matches on Subject: below --
2019-12-04  8:18 [PATCH v4 0/5] clk: rockchip: Support for some new features Elaine Zhang
2019-12-04  8:18 ` [PATCH v4 4/5] clk: rockchip: add pll up and down when change pll freq Elaine Zhang
2019-12-30 19:06   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201014022812.6733-5-zhangqing@rock-chips.com \
    --to=zhangqing@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=kever.yang@rock-chips.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=xf@rock-chips.com \
    --cc=xxx@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®