From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 01/10] KVM: VMX: Track common EPTP for Hyper-V's paravirt TLB flush
Date: Tue, 20 Oct 2020 14:56:04 -0700 [thread overview]
Message-ID: <20201020215613.8972-2-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20201020215613.8972-1-sean.j.christopherson@intel.com>
Explicitly track the EPTP that is common to all vCPUs instead of
grabbing vCPU0's EPTP when invoking Hyper-V's paravirt TLB flush.
Tracking the EPTP will allow optimizing the checks when loading a new
EPTP and will also allow dropping ept_pointer_match, e.g. by marking
the common EPTP as invalid.
This also technically fixes a bug where KVM could theoretically flush an
invalid GPA if all vCPUs have an invalid root. In practice, it's likely
impossible to trigger a remote TLB flush in such a scenario. In any
case, the superfluous flush is completely benign.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/kvm/vmx/vmx.c | 19 ++++++++-----------
arch/x86/kvm/vmx/vmx.h | 1 +
2 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index bcc097bb8321..6d53bcc4a1a9 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -486,6 +486,7 @@ static void check_ept_pointer_match(struct kvm *kvm)
}
}
+ to_kvm_vmx(kvm)->hv_tlb_eptp = tmp_eptp;
to_kvm_vmx(kvm)->ept_pointers_match = EPT_POINTERS_MATCH;
}
@@ -498,21 +499,18 @@ static int kvm_fill_hv_flush_list_func(struct hv_guest_mapping_flush_list *flush
range->pages);
}
-static inline int __hv_remote_flush_tlb_with_range(struct kvm *kvm,
- struct kvm_vcpu *vcpu, struct kvm_tlb_range *range)
+static inline int hv_remote_flush_eptp(u64 eptp, struct kvm_tlb_range *range)
{
- u64 ept_pointer = to_vmx(vcpu)->ept_pointer;
-
/*
* FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE hypercall needs address
* of the base of EPT PML4 table, strip off EPT configuration
* information.
*/
if (range)
- return hyperv_flush_guest_mapping_range(ept_pointer & PAGE_MASK,
+ return hyperv_flush_guest_mapping_range(eptp & PAGE_MASK,
kvm_fill_hv_flush_list_func, (void *)range);
else
- return hyperv_flush_guest_mapping(ept_pointer & PAGE_MASK);
+ return hyperv_flush_guest_mapping(eptp & PAGE_MASK);
}
static int hv_remote_flush_tlb_with_range(struct kvm *kvm,
@@ -530,12 +528,11 @@ static int hv_remote_flush_tlb_with_range(struct kvm *kvm,
kvm_for_each_vcpu(i, vcpu, kvm) {
/* If ept_pointer is invalid pointer, bypass flush request. */
if (VALID_PAGE(to_vmx(vcpu)->ept_pointer))
- ret |= __hv_remote_flush_tlb_with_range(
- kvm, vcpu, range);
+ ret |= hv_remote_flush_eptp(to_vmx(vcpu)->ept_pointer,
+ range);
}
- } else {
- ret = __hv_remote_flush_tlb_with_range(kvm,
- kvm_get_vcpu(kvm, 0), range);
+ } else if (VALID_PAGE(to_kvm_vmx(kvm)->hv_tlb_eptp)) {
+ ret = hv_remote_flush_eptp(to_kvm_vmx(kvm)->hv_tlb_eptp, range);
}
spin_unlock(&to_kvm_vmx(kvm)->ept_pointer_lock);
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 5961cb897125..3d557a065c01 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -301,6 +301,7 @@ struct kvm_vmx {
bool ept_identity_pagetable_done;
gpa_t ept_identity_map_addr;
+ hpa_t hv_tlb_eptp;
enum ept_pointers_status ept_pointers_match;
spinlock_t ept_pointer_lock;
};
--
2.28.0
next prev parent reply other threads:[~2020-10-20 21:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-20 21:56 [PATCH v2 00/10] KVM: VMX: Clean up Hyper-V PV " Sean Christopherson
2020-10-20 21:56 ` Sean Christopherson [this message]
2020-10-21 11:57 ` [PATCH v2 01/10] KVM: VMX: Track common EPTP for Hyper-V's paravirt " Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 02/10] KVM: VMX: Stash kvm_vmx in a local variable for Hyper-V " Sean Christopherson
2020-10-21 12:00 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 03/10] KVM: VMX: Fold Hyper-V EPTP checking into it's only caller Sean Christopherson
2020-10-21 12:08 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 04/10] KVM: VMX: Do Hyper-V TLB flush iff vCPU's EPTP hasn't been flushed Sean Christopherson
2020-10-21 12:23 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 05/10] KVM: VMX: Invalidate hv_tlb_eptp to denote an EPTP mismatch Sean Christopherson
2020-10-21 12:39 ` Vitaly Kuznetsov
2020-10-21 16:38 ` Sean Christopherson
2020-10-22 9:03 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 06/10] KVM: VMX: Don't invalidate hv_tlb_eptp if the new EPTP matches Sean Christopherson
2020-10-21 13:47 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 07/10] KVM: VMX: Explicitly check for hv_remote_flush_tlb when loading pgd Sean Christopherson
[not found] ` <87r1pr4q8z.fsf@vitty.brq.redhat.com>
2020-10-21 17:30 ` Sean Christopherson
2020-10-20 21:56 ` [PATCH v2 08/10] KVM: VMX: Define Hyper-V paravirt TLB flush fields iff Hyper-V is enabled Sean Christopherson
2020-10-21 14:20 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 09/10] KVM: VMX: Skip additional Hyper-V TLB EPTP flushes if one fails Sean Christopherson
2020-10-21 14:22 ` Vitaly Kuznetsov
2020-10-20 21:56 ` [PATCH v2 10/10] KVM: VMX: Track PGD instead of EPTP for paravirt Hyper-V TLB flush Sean Christopherson
[not found] ` <87imb34p9b.fsf@vitty.brq.redhat.com>
2020-10-21 17:59 ` Sean Christopherson
2020-10-21 9:18 ` [PATCH v2 00/10] KVM: VMX: Clean up Hyper-V PV " Vitaly Kuznetsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201020215613.8972-2-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome