From: Prashant Malani <pmalani@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: heikki.krogerus@linux.intel.com,
Prashant Malani <pmalani@chromium.org>,
Benson Leung <bleung@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Guenter Roeck <groeck@chromium.org>,
Mark Brown <broonie@kernel.org>,
Pi-Hsun Shih <pihsun@chromium.org>
Subject: [PATCH 1/7] platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions
Date: Wed, 21 Oct 2020 13:53:10 -0700 [thread overview]
Message-ID: <20201021205317.708008-2-pmalani@chromium.org> (raw)
In-Reply-To: <20201021205317.708008-1-pmalani@chromium.org>
Move the cros_typec_set_port_params_v0/v1() functions closer to the
place where they are called, cros_typec_port_update().
While we are performing the relocation, also move cros_typec_get_mux_info()
closer to its call-site.
No functional changes are introduced by this commit.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
---
drivers/platform/chrome/cros_ec_typec.c | 136 ++++++++++++------------
1 file changed, 68 insertions(+), 68 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index 31be31161350..49083e21317d 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -329,74 +329,6 @@ static int cros_typec_ec_command(struct cros_typec_data *typec,
return ret;
}
-static void cros_typec_set_port_params_v0(struct cros_typec_data *typec,
- int port_num, struct ec_response_usb_pd_control *resp)
-{
- struct typec_port *port = typec->ports[port_num]->port;
- enum typec_orientation polarity;
-
- if (!resp->enabled)
- polarity = TYPEC_ORIENTATION_NONE;
- else if (!resp->polarity)
- polarity = TYPEC_ORIENTATION_NORMAL;
- else
- polarity = TYPEC_ORIENTATION_REVERSE;
-
- typec_set_pwr_role(port, resp->role ? TYPEC_SOURCE : TYPEC_SINK);
- typec_set_orientation(port, polarity);
-}
-
-static void cros_typec_set_port_params_v1(struct cros_typec_data *typec,
- int port_num, struct ec_response_usb_pd_control_v1 *resp)
-{
- struct typec_port *port = typec->ports[port_num]->port;
- enum typec_orientation polarity;
- bool pd_en;
- int ret;
-
- if (!(resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
- polarity = TYPEC_ORIENTATION_NONE;
- else if (!resp->polarity)
- polarity = TYPEC_ORIENTATION_NORMAL;
- else
- polarity = TYPEC_ORIENTATION_REVERSE;
- typec_set_orientation(port, polarity);
- typec_set_data_role(port, resp->role & PD_CTRL_RESP_ROLE_DATA ?
- TYPEC_HOST : TYPEC_DEVICE);
- typec_set_pwr_role(port, resp->role & PD_CTRL_RESP_ROLE_POWER ?
- TYPEC_SOURCE : TYPEC_SINK);
- typec_set_vconn_role(port, resp->role & PD_CTRL_RESP_ROLE_VCONN ?
- TYPEC_SOURCE : TYPEC_SINK);
-
- /* Register/remove partners when a connect/disconnect occurs. */
- if (resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED) {
- if (typec->ports[port_num]->partner)
- return;
-
- pd_en = resp->enabled & PD_CTRL_RESP_ENABLED_PD_CAPABLE;
- ret = cros_typec_add_partner(typec, port_num, pd_en);
- if (ret)
- dev_warn(typec->dev,
- "Failed to register partner on port: %d\n",
- port_num);
- } else {
- if (!typec->ports[port_num]->partner)
- return;
- cros_typec_remove_partner(typec, port_num);
- }
-}
-
-static int cros_typec_get_mux_info(struct cros_typec_data *typec, int port_num,
- struct ec_response_usb_pd_mux_info *resp)
-{
- struct ec_params_usb_pd_mux_info req = {
- .port = port_num,
- };
-
- return cros_typec_ec_command(typec, 0, EC_CMD_USB_PD_MUX_INFO, &req,
- sizeof(req), resp, sizeof(*resp));
-}
-
static int cros_typec_usb_safe_state(struct cros_typec_port *port)
{
port->state.mode = TYPEC_STATE_SAFE;
@@ -573,6 +505,74 @@ static int cros_typec_configure_mux(struct cros_typec_data *typec, int port_num,
return ret;
}
+static void cros_typec_set_port_params_v0(struct cros_typec_data *typec,
+ int port_num, struct ec_response_usb_pd_control *resp)
+{
+ struct typec_port *port = typec->ports[port_num]->port;
+ enum typec_orientation polarity;
+
+ if (!resp->enabled)
+ polarity = TYPEC_ORIENTATION_NONE;
+ else if (!resp->polarity)
+ polarity = TYPEC_ORIENTATION_NORMAL;
+ else
+ polarity = TYPEC_ORIENTATION_REVERSE;
+
+ typec_set_pwr_role(port, resp->role ? TYPEC_SOURCE : TYPEC_SINK);
+ typec_set_orientation(port, polarity);
+}
+
+static void cros_typec_set_port_params_v1(struct cros_typec_data *typec,
+ int port_num, struct ec_response_usb_pd_control_v1 *resp)
+{
+ struct typec_port *port = typec->ports[port_num]->port;
+ enum typec_orientation polarity;
+ bool pd_en;
+ int ret;
+
+ if (!(resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED))
+ polarity = TYPEC_ORIENTATION_NONE;
+ else if (!resp->polarity)
+ polarity = TYPEC_ORIENTATION_NORMAL;
+ else
+ polarity = TYPEC_ORIENTATION_REVERSE;
+ typec_set_orientation(port, polarity);
+ typec_set_data_role(port, resp->role & PD_CTRL_RESP_ROLE_DATA ?
+ TYPEC_HOST : TYPEC_DEVICE);
+ typec_set_pwr_role(port, resp->role & PD_CTRL_RESP_ROLE_POWER ?
+ TYPEC_SOURCE : TYPEC_SINK);
+ typec_set_vconn_role(port, resp->role & PD_CTRL_RESP_ROLE_VCONN ?
+ TYPEC_SOURCE : TYPEC_SINK);
+
+ /* Register/remove partners when a connect/disconnect occurs. */
+ if (resp->enabled & PD_CTRL_RESP_ENABLED_CONNECTED) {
+ if (typec->ports[port_num]->partner)
+ return;
+
+ pd_en = resp->enabled & PD_CTRL_RESP_ENABLED_PD_CAPABLE;
+ ret = cros_typec_add_partner(typec, port_num, pd_en);
+ if (ret)
+ dev_warn(typec->dev,
+ "Failed to register partner on port: %d\n",
+ port_num);
+ } else {
+ if (!typec->ports[port_num]->partner)
+ return;
+ cros_typec_remove_partner(typec, port_num);
+ }
+}
+
+static int cros_typec_get_mux_info(struct cros_typec_data *typec, int port_num,
+ struct ec_response_usb_pd_mux_info *resp)
+{
+ struct ec_params_usb_pd_mux_info req = {
+ .port = port_num,
+ };
+
+ return cros_typec_ec_command(typec, 0, EC_CMD_USB_PD_MUX_INFO, &req,
+ sizeof(req), resp, sizeof(*resp));
+}
+
static int cros_typec_port_update(struct cros_typec_data *typec, int port_num)
{
struct ec_params_usb_pd_control req;
--
2.29.0.rc1.297.gfa9743e501-goog
next prev parent reply other threads:[~2020-10-21 20:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-21 20:53 [PATCH 0/7] platform/chrome: cros_ec_typec: Register partner PD information Prashant Malani
2020-10-21 20:53 ` Prashant Malani [this message]
2020-10-21 20:53 ` [PATCH 2/7] platform/chrome: cros_ec_typec: Fix remove partner logic Prashant Malani
2020-10-21 20:53 ` [PATCH 3/7] platform/chrome: cros_ec_typec: Clear partner identity on device removal Prashant Malani
2020-10-21 20:53 ` [PATCH 4/7] platform/chrome: cros_ec: Import Type C host commands Prashant Malani
2020-10-21 20:53 ` [PATCH 5/7] platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS Prashant Malani
2020-10-21 22:54 ` kernel test robot
2020-10-21 23:50 ` Prashant Malani
2020-10-27 14:27 ` kernel test robot
2020-10-27 14:27 ` [RFC PATCH] platform/chrome: cros_ec_typec: cros_typec_cmds_supported() can be static kernel test robot
2020-10-27 17:52 ` [PATCH 5/7] platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS kernel test robot
2020-10-21 20:53 ` [PATCH 6/7] platform/chrome: cros_ec_typec: Parse partner PD ID VDOs Prashant Malani
[not found] ` <20201028131633.GA2026875@kuha.fi.intel.com>
2020-10-28 20:11 ` Prashant Malani
2020-10-30 13:25 ` Heikki Krogerus
2020-10-21 20:53 ` [PATCH 7/7] platform/chrome: cros_ec_typec: Register partner altmodes Prashant Malani
[not found] ` <20201028131732.GB2026875@kuha.fi.intel.com>
2020-10-29 22:11 ` Prashant Malani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201021205317.708008-2-pmalani@chromium.org \
--to=pmalani@chromium.org \
--cc=bleung@chromium.org \
--cc=broonie@kernel.org \
--cc=enric.balletbo@collabora.com \
--cc=groeck@chromium.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pihsun@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®