[PATCH v5 05/11] arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2

[Ioana Ciornei <ciorneiioana@gmail.com>]

From: Ioana Ciornei <ioana.ciornei@nxp.com>

Annotate the external MDIO2 node and describe the 10GBASER PHY found on
the LS1088ARDB board and add a phy-handle for DPMAC2 to link it.
Also, add the internal PCS MDIO node for the internal MDIO buses found
on the LS1088A SoC along with its internal PCS PHY and link the
corresponding DPMAC to the PCS through the pcs-handle.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none
Changes in v3:
 - none
Changes in v4:
 - none
Changes in v5:
  - renamed all PHY nodes to ethernet-phy@X where the unit address is the
   reg value

 .../boot/dts/freescale/fsl-ls1088a-rdb.dts    | 19 +++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index e28443ba2633..528ec72d0b83 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -17,6 +17,12 @@ / {
 	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
 };
 
+&dpmac2 {
+	phy-handle = <&mdio2_aquantia_phy>;
+	phy-connection-type = "10gbase-r";
+	pcs-handle = <&pcs2>;
+};
+
 &dpmac3 {
 	phy-handle = <&mdio1_phy5>;
 	phy-connection-type = "qsgmii";
@@ -109,6 +115,15 @@ mdio1_phy4: ethernet-phy@1f {
 	};
 };
 
+&emdio2 {
+	status = "okay";
+
+	mdio2_aquantia_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -179,6 +194,10 @@ &esdhc {
 	status = "okay";
 };
 
+&pcs_mdio2 {
+	status = "okay";
+};
+
 &pcs_mdio3 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 4bcd4772164d..b7d60ac42669 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -690,6 +690,19 @@ emdio2: mdio@8b97000 {
 			status = "disabled";
 		};
 
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
 		pcs_mdio3: mdio@8c0f000 {
 			compatible = "fsl,fman-memac-mdio";
 			reg = <0x0 0x8c0f000 0x0 0x1000>;
-- 
2.28.0