From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Tony Lindgren <tony@atomide.com>, Nishanth Menon <nm@ti.com>,
<soc@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
<linux-omap@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v2] ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
Date: Fri, 30 Oct 2020 14:46:50 +0200 [thread overview]
Message-ID: <20201030124650.20349-1-grygorii.strashko@ti.com> (raw)
Enable networking options required for NFS boot on TI platforms, which is
widely for automated test systems.
- enable new TI CPSW switch driver and related NET_SWITCHDEV config
- enable TI DP83867 phy
- explicitly enable PTP clock support to ensure dependent networking
drivers will stay built-in.
vmlinux size changes:
- before:
text data bss dec hex filename
14703736 8024602 444976 23173314 16198c2 ./omap-arm/vmlinux
- after:
text data bss dec hex filename
14727271 8029150 444528 23200949 16204b5 ./omap-arm/vmlinux
diff: 27635 (dec)
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
---
changes in v2:
- rebased on top of 5.10-rc1
- commit mesage updated
arch/arm/configs/multi_v7_defconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e731cdf7c88c..32aaec92736b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -154,6 +154,7 @@ CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NET_DSA=m
CONFIG_CAN=y
CONFIG_CAN_AT91=m
@@ -270,9 +271,12 @@ CONFIG_SNI_AVE=y
CONFIG_STMMAC_ETH=y
CONFIG_DWMAC_DWC_QOS_ETH=y
CONFIG_TI_CPSW=y
+CONFIG_TI_CPSW_SWITCHDEV=y
+CONFIG_TI_CPTS=y
CONFIG_XILINX_EMACLITE=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
+CONFIG_DP83867_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_AT803X_PHY=y
@@ -436,6 +440,7 @@ CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_SPIDEV=y
CONFIG_SPMI=y
+CONFIG_PTP_1588_CLOCK=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_RZA2=y
CONFIG_PINCTRL_STMFX=y
--
2.17.1
next reply other threads:[~2020-10-30 12:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 12:46 Grygorii Strashko [this message]
2020-11-16 9:04 ` Tony Lindgren
[not found] ` <CAK8P3a0-LWzSvvKkH5xVAoCfNGG_fhDJ37AZVW+qknSZU1wxDw@mail.gmail.com>
2020-11-23 17:27 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201030124650.20349-1-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=soc@kernel.org \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®