mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Paul Cercueil <paul@crapouillou.net>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	od@zcrc.me, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 5/5] drm/ingenic: Add option to alloc cached GEM buffers
Date: Tue, 3 Nov 2020 11:17:57 +0100	[thread overview]
Message-ID: <20201103101757.GZ401619@phenom.ffwll.local> (raw)
In-Reply-To: <20201102220651.22069-6-paul@crapouillou.net>

On Mon, Nov 02, 2020 at 10:06:51PM +0000, Paul Cercueil wrote:
> With the module parameter ingenic-drm.cached_gem_buffers, it is possible
> to specify that we want GEM buffers backed by non-coherent memory.
> 
> This dramatically speeds up software rendering on Ingenic SoCs, even for
> tasks where write-combine memory should in theory be faster (e.g. simple
> blits).
> 
> Leave it disabled by default, since it is specific to one use-case
> (software rendering).
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Hm so maybe I'm making myself supremely unpopular here again with being
very late, but we have dev->mode_config.prefer_shadow for this. Drivers
should set this if software rendering is slow, and userspace should follow
this.

Now unfortunately it looks like most kms drivers don't bother setting
this, and we're a lot worse.

So if "slow sw rendering" is the only reason, setting that flag is the
right option.

Now the other thing is fbdev, since fbdev doesn't have this hint at all.
But we already have full generic fbdev shadow support (for defio), so for
that I think the best option is adding a force_shadow option to fbdev.

If we otoh do this here, and some drivers get a in-kernel shadow support
for kms, while others don't, then we have a pretty supreme mess. I'd like
to avoid that.

So maybe the right solution here is that we make sure that when you have
cma helpers set up that mode_config.prefer_shadow is set. Ideally only
when coherent dma memory is uncached/write-combine and hence slow for sw
rendering. This might need a slight dma-api layering violation.
-Daniel

> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 58 +++++++++++++++++++++--
>  drivers/gpu/drm/ingenic/ingenic-drm.h     |  4 ++
>  drivers/gpu/drm/ingenic/ingenic-ipu.c     | 12 ++++-
>  3 files changed, 69 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index b9c156e13156..1ec2ec2faa04 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -9,6 +9,7 @@
>  #include <linux/component.h>
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
> +#include <linux/io.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/of_device.h>
> @@ -22,6 +23,7 @@
>  #include <drm/drm_color_mgmt.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/drm_damage_helper.h>
>  #include <drm/drm_drv.h>
>  #include <drm/drm_gem_cma_helper.h>
>  #include <drm/drm_fb_cma_helper.h>
> @@ -97,6 +99,11 @@ struct ingenic_drm {
>  	struct notifier_block clock_nb;
>  };
>  
> +static bool ingenic_drm_cached_gem_buf;
> +module_param_named(cached_gem_buffers, ingenic_drm_cached_gem_buf, bool, 0400);
> +MODULE_PARM_DESC(cached_gem_buffers,
> +		 "Enable fully cached GEM buffers [default=false]");
> +
>  static bool ingenic_drm_writeable_reg(struct device *dev, unsigned int reg)
>  {
>  	switch (reg) {
> @@ -400,6 +407,8 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>  	     plane->state->fb->format->format != state->fb->format->format))
>  		crtc_state->mode_changed = true;
>  
> +	drm_atomic_helper_check_plane_damage(state->state, state);
> +
>  	return 0;
>  }
>  
> @@ -531,6 +540,14 @@ static void ingenic_drm_update_palette(struct ingenic_drm *priv,
>  	}
>  }
>  
> +void ingenic_drm_sync_data(struct device *dev,
> +			   struct drm_plane_state *old_state,
> +			   struct drm_plane_state *state)
> +{
> +	if (ingenic_drm_cached_gem_buf)
> +		drm_gem_cma_sync_data(dev, old_state, state);
> +}
> +
>  static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  					    struct drm_plane_state *oldstate)
>  {
> @@ -543,6 +560,8 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  	u32 fourcc;
>  
>  	if (state && state->fb) {
> +		ingenic_drm_sync_data(priv->dev, oldstate, state);
> +
>  		crtc_state = state->crtc->state;
>  
>  		addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
> @@ -714,7 +733,36 @@ static void ingenic_drm_disable_vblank(struct drm_crtc *crtc)
>  	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, JZ_LCD_CTRL_EOF_IRQ, 0);
>  }
>  
> -DEFINE_DRM_GEM_CMA_FOPS(ingenic_drm_fops);
> +static struct drm_framebuffer *
> +ingenic_drm_gem_fb_create(struct drm_device *dev, struct drm_file *file,
> +			  const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	if (ingenic_drm_cached_gem_buf)
> +		return drm_gem_fb_create_with_dirty(dev, file, mode_cmd);
> +
> +	return drm_gem_fb_create(dev, file, mode_cmd);
> +}
> +
> +static int ingenic_drm_gem_cma_mmap(struct file *filp,
> +				    struct vm_area_struct *vma)
> +{
> +	if (ingenic_drm_cached_gem_buf)
> +		return drm_gem_cma_mmap_noncoherent(filp, vma);
> +
> +	return drm_gem_cma_mmap(filp, vma);
> +}
> +
> +static const struct file_operations ingenic_drm_fops = {
> +	.owner		= THIS_MODULE,
> +	.open		= drm_open,
> +	.release	= drm_release,
> +	.unlocked_ioctl	= drm_ioctl,
> +	.compat_ioctl	= drm_compat_ioctl,
> +	.poll		= drm_poll,
> +	.read		= drm_read,
> +	.llseek		= noop_llseek,
> +	.mmap		= ingenic_drm_gem_cma_mmap,
> +};
>  
>  static struct drm_driver ingenic_drm_driver_data = {
>  	.driver_features	= DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
> @@ -726,7 +774,7 @@ static struct drm_driver ingenic_drm_driver_data = {
>  	.patchlevel		= 0,
>  
>  	.fops			= &ingenic_drm_fops,
> -	DRM_GEM_CMA_DRIVER_OPS,
> +	DRM_GEM_CMA_DRIVER_OPS_WITH_DUMB_CREATE(drm_gem_cma_dumb_create_noncoherent),
>  
>  	.irq_handler		= ingenic_drm_irq_handler,
>  };
> @@ -778,7 +826,7 @@ static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs =
>  };
>  
>  static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = {
> -	.fb_create		= drm_gem_fb_create,
> +	.fb_create		= ingenic_drm_gem_fb_create,
>  	.output_poll_changed	= drm_fb_helper_output_poll_changed,
>  	.atomic_check		= drm_atomic_helper_check,
>  	.atomic_commit		= drm_atomic_helper_commit,
> @@ -932,6 +980,8 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>  		return ret;
>  	}
>  
> +	drm_plane_enable_fb_damage_clips(&priv->f1);
> +
>  	drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
>  
>  	ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->f1,
> @@ -960,6 +1010,8 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>  			return ret;
>  		}
>  
> +		drm_plane_enable_fb_damage_clips(&priv->f0);
> +
>  		if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU) && has_components) {
>  			ret = component_bind_all(dev, drm);
>  			if (ret) {
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
> index 9b48ce02803d..ee3a892c0383 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
> @@ -171,6 +171,10 @@ void ingenic_drm_plane_config(struct device *dev,
>  			      struct drm_plane *plane, u32 fourcc);
>  void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane);
>  
> +void ingenic_drm_sync_data(struct device *dev,
> +			   struct drm_plane_state *old_state,
> +			   struct drm_plane_state *state);
> +
>  extern struct platform_driver *ingenic_ipu_driver_ptr;
>  
>  #endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H */
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> index fc8c6e970ee3..38c83e8cc6a5 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> @@ -20,6 +20,7 @@
>  
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
> +#include <drm/drm_damage_helper.h>
>  #include <drm/drm_drv.h>
>  #include <drm/drm_fb_cma_helper.h>
>  #include <drm/drm_fourcc.h>
> @@ -316,6 +317,8 @@ static void ingenic_ipu_plane_atomic_update(struct drm_plane *plane,
>  				JZ_IPU_CTRL_CHIP_EN | JZ_IPU_CTRL_LCDC_SEL);
>  	}
>  
> +	ingenic_drm_sync_data(ipu->master, oldstate, state);
> +
>  	/* New addresses will be committed in vblank handler... */
>  	ipu->addr_y = drm_fb_cma_get_gem_addr(state->fb, state, 0);
>  	if (finfo->num_planes > 1)
> @@ -534,7 +537,7 @@ static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane,
>  
>  	if (!state->crtc ||
>  	    !crtc_state->mode.hdisplay || !crtc_state->mode.vdisplay)
> -		return 0;
> +		goto out_check_damage;
>  
>  	/* Plane must be fully visible */
>  	if (state->crtc_x < 0 || state->crtc_y < 0 ||
> @@ -551,7 +554,7 @@ static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane,
>  		return -EINVAL;
>  
>  	if (!osd_changed(state, plane->state))
> -		return 0;
> +		goto out_check_damage;
>  
>  	crtc_state->mode_changed = true;
>  
> @@ -578,6 +581,9 @@ static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane,
>  	ipu->denom_w = denom_w;
>  	ipu->denom_h = denom_h;
>  
> +out_check_damage:
> +	drm_atomic_helper_check_plane_damage(state->state, state);
> +
>  	return 0;
>  }
>  
> @@ -759,6 +765,8 @@ static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d)
>  		return err;
>  	}
>  
> +	drm_plane_enable_fb_damage_clips(plane);
> +
>  	/*
>  	 * Sharpness settings range is [0,32]
>  	 * 0       : nearest-neighbor
> -- 
> 2.28.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

  reply	other threads:[~2020-11-03 10:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-02 22:06 [PATCH 0/5] Add option to mmap GEM buffers cached, try 2 Paul Cercueil
2020-11-02 22:06 ` [PATCH 1/5] drm: Add and export function drm_gem_cma_create_noncoherent Paul Cercueil
2020-11-02 22:06 ` [PATCH 2/5] drm: Add and export function drm_gem_cma_dumb_create_noncoherent Paul Cercueil
2020-11-02 22:06 ` [PATCH 3/5] drm: Add and export function drm_gem_cma_mmap_noncoherent Paul Cercueil
2020-11-03 18:50   ` Christoph Hellwig
2020-11-03 19:13     ` Paul Cercueil
2020-12-08 14:00       ` Paul Cercueil
2020-11-02 22:06 ` [PATCH 4/5] drm: Add and export function drm_gem_cma_sync_data Paul Cercueil
2020-11-02 22:06 ` [PATCH 5/5] drm/ingenic: Add option to alloc cached GEM buffers Paul Cercueil
2020-11-03 10:17   ` Daniel Vetter [this message]
2020-11-03 11:56     ` Paul Cercueil
2020-11-03 12:52       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201103101757.GZ401619@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=od@zcrc.me \
    --cc=paul@crapouillou.net \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®