From: Alice Guo <alice.guo@nxp.com>
To: shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, peng.fan@nxp.com
Subject: [PATCH v1 4/4] LF-2571-4 soc: imx8m: change to use platform driver
Date: Wed, 4 Nov 2020 11:06:45 +0800 [thread overview]
Message-ID: <20201104030645.12931-5-alice.guo@nxp.com> (raw)
In-Reply-To: <20201104030645.12931-1-alice.guo@nxp.com>
Directly reading ocotp register depends on that bootloader enables ocotp
clk, which is not always effective, so change to use nvmem API. Using
nvmem API requires to support driver defer probe and thus change
soc-imx8m.c to use platform driver.
The other reason is that directly reading ocotp register causes kexec
kernel hang because the 1st kernel running will disable unused clks
after kernel boots up, and then ocotp clk will be disabled even if
bootloader enables it. When kexec kernel, ocotp clk needs to be enabled
before reading ocotp registers, and nvmem API with platform driver
supported can accomplish this.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
---
drivers/soc/imx/soc-imx8m.c | 75 +++++++++++++++++++++----------------
1 file changed, 42 insertions(+), 33 deletions(-)
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index cc57a384d74d..83f3297509be 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -5,6 +5,8 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -29,7 +31,7 @@
struct imx8_soc_data {
char *name;
- u32 (*soc_revision)(void);
+ u32 (*soc_revision)(struct device *dev);
};
static u64 soc_uid;
@@ -50,12 +52,15 @@ static u32 imx8mq_soc_revision_from_atf(void)
static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
#endif
-static u32 __init imx8mq_soc_revision(void)
+static u32 __init imx8mm_soc_uid(struct device *dev);
+
+static u32 __init imx8mq_soc_revision(struct device *dev)
{
struct device_node *np;
void __iomem *ocotp_base;
u32 magic;
u32 rev;
+ int ret = 0;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
if (!np)
@@ -75,9 +80,9 @@ static u32 __init imx8mq_soc_revision(void)
rev = REV_B1;
}
- soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
- soc_uid <<= 32;
- soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+ ret = imx8mm_soc_uid(dev);
+ if (ret)
+ return ret;
iounmap(ocotp_base);
of_node_put(np);
@@ -85,33 +90,20 @@ static u32 __init imx8mq_soc_revision(void)
return rev;
}
-static void __init imx8mm_soc_uid(void)
+static u32 __init imx8mm_soc_uid(struct device *dev)
{
- void __iomem *ocotp_base;
- struct device_node *np;
- u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
- IMX8MP_OCOTP_UID_OFFSET : 0;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
- if (!np)
- return;
-
- ocotp_base = of_iomap(np, 0);
- WARN_ON(!ocotp_base);
-
- soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
- soc_uid <<= 32;
- soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
+ int ret = 0;
- iounmap(ocotp_base);
- of_node_put(np);
+ ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
+ return ret;
}
-static u32 __init imx8mm_soc_revision(void)
+static u32 __init imx8mm_soc_revision(struct device *dev)
{
struct device_node *np;
void __iomem *anatop_base;
u32 rev;
+ int ret;
np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
if (!np)
@@ -125,7 +117,9 @@ static u32 __init imx8mm_soc_revision(void)
iounmap(anatop_base);
of_node_put(np);
- imx8mm_soc_uid();
+ ret = imx8mm_soc_uid(dev);
+ if (ret)
+ return ret;
return rev;
}
@@ -151,19 +145,20 @@ static const struct imx8_soc_data imx8mp_soc_data = {
};
static __maybe_unused const struct of_device_id imx8_soc_match[] = {
- { .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
- { .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
- { .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },
- { .compatible = "fsl,imx8mp", .data = &imx8mp_soc_data, },
+ { .compatible = "fsl,imx8mq-soc", .data = &imx8mq_soc_data, },
+ { .compatible = "fsl,imx8mm-soc", .data = &imx8mm_soc_data, },
+ { .compatible = "fsl,imx8mn-soc", .data = &imx8mn_soc_data, },
+ { .compatible = "fsl,imx8mp-soc", .data = &imx8mp_soc_data, },
{ }
};
+MODULE_DEVICE_TABLE(of, imx8_soc_match);
#define imx8_revision(soc_rev) \
soc_rev ? \
kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf, soc_rev & 0xf) : \
"unknown"
-static int __init imx8_soc_init(void)
+static int imx8_soc_init_probe(struct platform_device *pdev)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
@@ -182,7 +177,7 @@ static int __init imx8_soc_init(void)
if (ret)
goto free_soc;
- id = of_match_node(imx8_soc_match, of_root);
+ id = of_match_node(imx8_soc_match, pdev->dev.of_node);
if (!id) {
ret = -ENODEV;
goto free_soc;
@@ -192,7 +187,11 @@ static int __init imx8_soc_init(void)
if (data) {
soc_dev_attr->soc_id = data->name;
if (data->soc_revision)
- soc_rev = data->soc_revision();
+ soc_rev = data->soc_revision(&pdev->dev);
+
+ ret = soc_rev;
+ if (ret < 0)
+ goto free_soc;
}
soc_dev_attr->revision = imx8_revision(soc_rev);
@@ -230,4 +229,14 @@ static int __init imx8_soc_init(void)
kfree(soc_dev_attr);
return ret;
}
-device_initcall(imx8_soc_init);
+
+static struct platform_driver imx8_soc_init_driver = {
+ .probe = imx8_soc_init_probe,
+ .driver = {
+ .name = "imx8_soc_init",
+ .of_match_table = of_match_ptr(imx8_soc_match),
+ },
+};
+
+module_platform_driver(imx8_soc_init_driver);
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2020-11-04 3:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-04 3:06 [PATCH v1 0/4] change drivers/soc/imx/soc-imx8m.c " Alice Guo
2020-11-04 3:06 ` [PATCH v1 1/4] LF-2571-1: dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Alice Guo
2020-11-04 7:58 ` Krzysztof Kozlowski
2020-11-04 8:02 ` Krzysztof Kozlowski
2020-11-04 8:04 ` Peng Fan
2020-11-04 8:12 ` Krzysztof Kozlowski
2020-11-04 3:06 ` [PATCH v1 2/4] LF-2571-2 arm64: dts: imx8m: add compatible string to .dtsi file Alice Guo
2020-11-04 3:06 ` [PATCH v1 3/4] LF-2571-3 arm64: dts: imx8m: add nvmem-cell related stuff Alice Guo
2020-11-04 8:06 ` Krzysztof Kozlowski
2020-11-04 3:06 ` Alice Guo [this message]
2020-11-04 7:54 ` [PATCH v1 0/4] change drivers/soc/imx/soc-imx8m.c to use platform driver Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201104030645.12931-5-alice.guo@nxp.com \
--to=alice.guo@nxp.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®