From: Jagan Teki <jagan@amarulasolutions.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-amarula <linux-amarula@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH 6/9] arm64: dts: rockchip: px30-engicam: Add BT support
Date: Mon, 9 Nov 2020 23:40:14 +0530 [thread overview]
Message-ID: <20201109181017.206834-7-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20201109181017.206834-1-jagan@amarulasolutions.com>
From: Suniel Mahesh <sunil@amarulasolutions.com>
Engicam PX30 carrier boards like EDIMM2.2 and C.TOUCH2.0 have
an onboard Sterling-LWD Wifi/BT chip based on BCM43430 connected
on the UART bus.
UART bus on the design routed via USB to UART CP20x bridge. This
bridge powered from 3V3 regualtor gpio.
This patch adds BT enablement nodes for these respective boards.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
.../arm64/boot/dts/rockchip/px30-engicam-common.dtsi | 12 ++++++++++++
.../boot/dts/rockchip/px30-engicam-ctouch2.dtsi | 10 ++++++++++
.../dts/rockchip/px30-engicam-px30-core-edimm2.2.dts | 10 ++++++++++
3 files changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 92681ccf50f1..eb2be7893863 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -40,6 +40,18 @@ sdio_pwrseq: sdio-pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
};
+
+ vcc3v3_btreg: vcc3v3-btreg {
+ compatible = "regulator-gpio";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable_h>;
+ regulator-name = "btreg-gpio-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ states = <3300000 0x0>;
+ };
};
&sdio {
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
index d5708779c285..bf10a3d29fca 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -8,6 +8,12 @@
#include "px30-engicam-common.dtsi"
&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -18,3 +24,7 @@ wifi_enable_h: wifi-enable-h {
&sdio_pwrseq {
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
};
+
+&vcc3v3_btreg {
+ enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
index 913444548b59..d759478e1c84 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -21,6 +21,12 @@ chosen {
};
&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -31,3 +37,7 @@ wifi_enable_h: wifi-enable-h {
&sdio_pwrseq {
reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
};
+
+&vcc3v3_btreg {
+ enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
--
2.25.1
next prev parent reply other threads:[~2020-11-09 18:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 18:10 [PATCH 0/9] arm64: dts: rockchip: Engicam PX30.Core changes Jagan Teki
2020-11-09 18:10 ` [PATCH 1/9] arm64: dts: rockchip: px30-enagicam: Enable USB Host, OTG Jagan Teki
2020-11-09 18:10 ` [PATCH 2/9] arm64: dts: rockchip: px30-engicam-edimm2.2: Enable LVDS panel Jagan Teki
2020-11-09 18:10 ` [PATCH 3/9] dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF Jagan Teki
2020-11-09 18:10 ` [PATCH 4/9] arm64: dts: " Jagan Teki
2020-11-09 18:10 ` [PATCH 5/9] arm64: dts: rockchip: px30-engicam: Add WiFi support Jagan Teki
2020-11-09 18:10 ` Jagan Teki [this message]
2020-11-09 18:10 ` [PATCH 7/9] arm64: defconfig: Enable ROCKCHIP_LVDS Jagan Teki
2020-11-09 18:10 ` [PATCH 8/9] arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY Jagan Teki
2020-11-09 18:10 ` [PATCH 9/9] arm64: defconfig: Enable USB_SERIAL_CP210X Jagan Teki
2020-11-30 1:51 ` [PATCH 0/9] arm64: dts: rockchip: Engicam PX30.Core changes Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201109181017.206834-7-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=sunil@amarulasolutions.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®