From: Kirill Marinushkin <kmarinushkin@birdec.com>
To: Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Matthias Reichl <hias@horus.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
Kirill Marinushkin <kmarinushkin@birdec.com>
Subject: [PATCH v3 3/4] ASoC: pcm512x: Move format check into `set_fmt()`
Date: Sun, 15 Nov 2020 13:23:05 +0100 [thread overview]
Message-ID: <20201115122306.18164-4-kmarinushkin@birdec.com> (raw)
In-Reply-To: <20201115122306.18164-1-kmarinushkin@birdec.com>
I would like to describe the reasoning by quoting Peter Ujfalusi
<peter.ujfalusi@ti.com> from his review of this patch series v1 [1]:
> When you bind a link you will use set_fmt for the two sides to see if
> they can agree, that both can support what has been asked.
>
> The pcm512x driver just saves the fmt and say back to that card:
> whatever, I'm fine with it. But runtime during hw_params it can fail due
> to unsupported bus format, which it actually acked to be ok.
>
> This is the difference.
>
> Sure, some device have constraint based on the fmt towards the hw_params
> and it is perfectly OK to do such a checks and rejections or build
> rules/constraints based on fmt, but failing hw_params just because
> set_fmt did not checked that the bus format is not even supported is not
> a nice thing to do.
[1] https://patchwork.kernel.org/project/alsa-devel/patch/
20201109212133.25869-1-kmarinushkin@birdec.com/
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Matthias Reichl <hias@horus.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
---
sound/soc/codecs/pcm512x.c | 55 +++++++++++++++++++++++++---------------------
1 file changed, 30 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c
index aa55a477a28f..22ef77955a28 100644
--- a/sound/soc/codecs/pcm512x.c
+++ b/sound/soc/codecs/pcm512x.c
@@ -1168,8 +1168,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
int alen;
int gpio;
- int clock_output;
- int master_mode;
int ret;
dev_dbg(component->dev, "hw_params %u Hz, %u channels\n",
@@ -1202,11 +1200,8 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
return ret;
}
- switch (pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBS_CFS:
- clock_output = 0;
- master_mode = 0;
-
+ if ((pcm512x->fmt & SND_SOC_DAIFMT_MASTER_MASK) ==
+ SND_SOC_DAIFMT_CBS_CFS) {
ret = regmap_update_bits(pcm512x->regmap, PCM512x_ERROR_DETECT,
PCM512x_DCAS, 0);
if (ret != 0) {
@@ -1216,16 +1211,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
return ret;
}
goto skip_pll;
- case SND_SOC_DAIFMT_CBM_CFM:
- clock_output = PCM512x_BCKO | PCM512x_LRKO;
- master_mode = PCM512x_RLRK | PCM512x_RBCK;
- break;
- case SND_SOC_DAIFMT_CBM_CFS:
- clock_output = PCM512x_BCKO;
- master_mode = PCM512x_RBCK;
- break;
- default:
- return -EINVAL;
}
if (pcm512x->pll_out) {
@@ -1343,6 +1328,34 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
}
skip_pll:
+ return 0;
+}
+
+static int pcm512x_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_component *component = dai->component;
+ struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
+ int clock_output;
+ int master_mode;
+ int ret;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ clock_output = 0;
+ master_mode = 0;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ clock_output = PCM512x_BCKO | PCM512x_LRKO;
+ master_mode = PCM512x_RLRK | PCM512x_RBCK;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ clock_output = PCM512x_BCKO;
+ master_mode = PCM512x_RBCK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
ret = regmap_update_bits(pcm512x->regmap, PCM512x_BCLK_LRCLK_CFG,
PCM512x_BCKP | PCM512x_BCKO | PCM512x_LRKO,
clock_output);
@@ -1359,14 +1372,6 @@ static int pcm512x_hw_params(struct snd_pcm_substream *substream,
return ret;
}
- return 0;
-}
-
-static int pcm512x_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
- struct snd_soc_component *component = dai->component;
- struct pcm512x_priv *pcm512x = snd_soc_component_get_drvdata(component);
-
pcm512x->fmt = fmt;
return 0;
--
2.13.6
next prev parent reply other threads:[~2020-11-15 12:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-15 12:23 [PATCH v3 0/4] ASoC: pcm512x: Patch series to set fmt from `set_fmt()` Kirill Marinushkin
2020-11-15 12:23 ` [PATCH v3 1/4] ASoC: pcm512x: Fix not setting word length if DAIFMT_CBS_CFS Kirill Marinushkin
2020-11-15 12:23 ` [PATCH v3 2/4] ASoC: pcm512x: Rearrange operations in `hw_params()` Kirill Marinushkin
2020-11-15 12:23 ` Kirill Marinushkin [this message]
2020-11-15 12:23 ` [PATCH v3 4/4] ASoC: pcm512x: Add support for more data formats Kirill Marinushkin
2020-11-16 12:18 ` [PATCH v3 0/4] ASoC: pcm512x: Patch series to set fmt from `set_fmt()` Peter Ujfalusi
2020-11-16 23:32 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201115122306.18164-4-kmarinushkin@birdec.com \
--to=kmarinushkin@birdec.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=hias@horus.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®