[PATCH 0/5] Improve reset for ocelot and add support for new platfrom

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hello,

This series first adds new feature to the ocelot reset driver and then
it extends its support for 2 other MIPS based SoCs: Luton and Jaguar 2.

Patches 1, 2 and 4 should be merged through the reset subsystem, while
the device tree changes in patches 3 and 5 should go through the mips
subsystem.

Gregory

Gregory CLEMENT (3):
  MIPS: dts: mscc: add reset switch property
  power: reset: ocelot: Add support 2 othe MIPS based SoCs
  MIPS: dts: mscc: add reset support for Luton and Jaguar2

Lars Povlsen (2):
  dt-bindings: reset: ocelot: Add documentation for
    'microchip,reset-switch-core' property
  power: reset: ocelot: Add support for reset switch on load time

 .../bindings/power/reset/ocelot-reset.txt     |  6 ++
 arch/mips/boot/dts/mscc/jaguar2.dtsi          |  6 ++
 arch/mips/boot/dts/mscc/luton.dtsi            |  5 ++
 arch/mips/boot/dts/mscc/ocelot.dtsi           |  1 +
 drivers/power/reset/ocelot-reset.c            | 70 +++++++++++++++++--
 5 files changed, 83 insertions(+), 5 deletions(-)

-- 
2.29.2