From: Gao Xiang <hsiangkao@redhat.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-erofs@lists.ozlabs.org, Gao Xiang <hsiangkao@redhat.com>,
Yann Collet <yann.collet.73@gmail.com>,
Nick Terrell <terrelln@fb.com>, Miao Xie <miaoxie@huawei.com>,
Chao Yu <yuchao0@huawei.com>, Li Guifu <bluce.liguifu@huawei.com>,
Guo Xuenan <guoxuenan@huawei.com>
Subject: [PATCH v2] lib/lz4: explicitly support in-place decompression
Date: Sun, 22 Nov 2020 11:07:49 +0800 [thread overview]
Message-ID: <20201122030749.2698994-1-hsiangkao@redhat.com> (raw)
In-Reply-To: <20201121191024.2631523-1-hsiangkao@redhat.com>
LZ4 final literal copy could be overlapped when doing
in-place decompression, so it's unsafe to just use memcpy()
on an optimized memcpy approach but memmove() instead.
Upstream LZ4 has updated this years ago [1] (and the impact
is non-sensible [2] plus only a few bytes remain), this commit
just synchronizes LZ4 upstream code to the kernel side as well.
It can be observed as EROFS in-place decompression failure
on specific files when X86_FEATURE_ERMS is unsupported,
memcpy() optimization of commit 59daa706fbec ("x86, mem:
Optimize memcpy by avoiding memory false dependece") will
be enabled then.
Currently most modern x86-CPUs support ERMS, these CPUs just
use "rep movsb" approach so no problem at all. However, it can
still be verified with forcely disabling ERMS feature...
arch/x86/lib/memcpy_64.S:
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
- "jmp memcpy_erms", X86_FEATURE_ERMS
+ "jmp memcpy_orig", X86_FEATURE_ERMS
We didn't observe any strange on arm64/arm/x86 platform before
since most memcpy() would behave in an increasing address order
("copy upwards" [3]) and it's the correct order of in-place
decompression but it really needs an update to memmove() for sure
considering it's an undefined behavior according to the standard
and some unique optimization already exists in the kernel.
[1] https://github.com/lz4/lz4/commit/33cb8518ac385835cc17be9a770b27b40cd0e15b
[2] https://github.com/lz4/lz4/pull/717#issuecomment-497818921
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=12518
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
---
changes since v1:
- refine commit message;
- Cc more people.
Hi Andrew,
Could you kindly consider picking this patch up, although
the impact is EROFS but it touchs in-kernel lz4 library
anyway...
Thanks,
Gao Xiang
lib/lz4/lz4_decompress.c | 6 +++++-
lib/lz4/lz4defs.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/lib/lz4/lz4_decompress.c b/lib/lz4/lz4_decompress.c
index 00cb0d0b73e1..8a7724a6ce2f 100644
--- a/lib/lz4/lz4_decompress.c
+++ b/lib/lz4/lz4_decompress.c
@@ -263,7 +263,11 @@ static FORCE_INLINE int LZ4_decompress_generic(
}
}
- LZ4_memcpy(op, ip, length);
+ /*
+ * supports overlapping memory regions; only matters
+ * for in-place decompression scenarios
+ */
+ LZ4_memmove(op, ip, length);
ip += length;
op += length;
diff --git a/lib/lz4/lz4defs.h b/lib/lz4/lz4defs.h
index c91dd96ef629..673bd206aa98 100644
--- a/lib/lz4/lz4defs.h
+++ b/lib/lz4/lz4defs.h
@@ -146,6 +146,7 @@ static FORCE_INLINE void LZ4_writeLE16(void *memPtr, U16 value)
* environments. This is needed when decompressing the Linux Kernel, for example.
*/
#define LZ4_memcpy(dst, src, size) __builtin_memcpy(dst, src, size)
+#define LZ4_memmove(dst, src, size) __builtin_memmove(dst, src, size)
static FORCE_INLINE void LZ4_copy8(void *dst, const void *src)
{
--
2.18.4
next prev parent reply other threads:[~2020-11-22 3:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-21 19:10 [PATCH] " Gao Xiang
2020-11-22 3:07 ` Gao Xiang [this message]
2020-11-30 18:19 ` [PATCH v2] " Nick Terrell
2020-11-30 18:54 ` Gao Xiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201122030749.2698994-1-hsiangkao@redhat.com \
--to=hsiangkao@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=bluce.liguifu@huawei.com \
--cc=guoxuenan@huawei.com \
--cc=linux-erofs@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miaoxie@huawei.com \
--cc=terrelln@fb.com \
--cc=yann.collet.73@gmail.com \
--cc=yuchao0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®