From: Al Viro <viro@ZenIV.linux.org.uk>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, x86@kernel.org,
linux-mips@vger.kernel.org, Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH 03/10] [elfcore-compat][amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
Date: Thu, 3 Dec 2020 21:46:34 +0000 [thread overview]
Message-ID: <20201203214641.3887979-3-viro@ZenIV.linux.org.uk> (raw)
In-Reply-To: <20201203214641.3887979-1-viro@ZenIV.linux.org.uk>
From: Al Viro <viro@zeniv.linux.org.uk>
To get rid of hardcoded size/offset in those macros we need to have
a definition of i386 variant of struct elf_prstatus. However, we can't
do that in asm/compat.h - the types needed for that are not there and
adding an include of asm/user32.h into asm/compat.h would cause a lot
of mess.
That could be conveniently done in elfcore-compat.h, but currently there
is nowhere to put arch-dependent parts of it - no asm/elfcore-compat.h.
So we introduce a new file (asm/elfcore-compat.h, present on architectures
that have CONFIG_ARCH_HAS_ELFCORE_COMPAT set, currently only on x86),
have it pulled by linux/elfcore-compat.h and move the definitions there.
As a side benefit, we don't need to worry about accidental inclusion of
that file into binfmt_elf.c itself, so we don't need the dance with
COMPAT_PRSTATUS_SIZE, etc. - only fs/compat_binfmt_elf.c will see
that header.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
arch/Kconfig | 3 +++
arch/x86/Kconfig | 1 +
arch/x86/include/asm/compat.h | 14 --------------
arch/x86/include/asm/elfcore-compat.h | 31 +++++++++++++++++++++++++++++++
fs/compat_binfmt_elf.c | 8 --------
include/linux/elfcore-compat.h | 18 +++++++++++-------
6 files changed, 46 insertions(+), 29 deletions(-)
create mode 100644 arch/x86/include/asm/elfcore-compat.h
diff --git a/arch/Kconfig b/arch/Kconfig
index 56b6ccc0e32d..b4d7eb7ef833 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1028,6 +1028,9 @@ config HAVE_STATIC_CALL_INLINE
bool
depends on HAVE_STATIC_CALL
+config ARCH_HAS_ELFCORE_COMPAT
+ bool
+
source "kernel/gcov/Kconfig"
source "scripts/gcc-plugins/Kconfig"
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f6946b81f74a..8eea77cf53a7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -30,6 +30,7 @@ config X86_64
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE
select SWIOTLB
+ select ARCH_HAS_ELFCORE_COMPAT
config FORCE_DYNAMIC_FTRACE
def_bool y
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 1897e1dcbdd2..423bafe8b797 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -159,20 +159,6 @@ struct compat_shmid64_ds {
compat_ulong_t __unused5;
};
-/*
- * The type of struct elf_prstatus.pr_reg in compatible core dumps.
- */
-typedef struct user_regs_struct compat_elf_gregset_t;
-
-/* Full regset -- prstatus on x32, otherwise on ia32 */
-#define COMPAT_PRSTATUS_SIZE (test_thread_flag(TIF_X32) \
- ? sizeof(struct compat_elf_prstatus) \
- : 144)
-#define COMPAT_SET_PR_FPVALID(S) \
- (*(test_thread_flag(TIF_X32) \
- ? &(S)->pr_fpvalid \
- : (int *)((void *)(S) + 140)) = 1)
-
#ifdef CONFIG_X86_X32_ABI
#define COMPAT_USE_64BIT_TIME \
(!!(task_pt_regs(current)->orig_ax & __X32_SYSCALL_BIT))
diff --git a/arch/x86/include/asm/elfcore-compat.h b/arch/x86/include/asm/elfcore-compat.h
new file mode 100644
index 000000000000..614308ba3b95
--- /dev/null
+++ b/arch/x86/include/asm/elfcore-compat.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_ELFCORE_COMPAT_H
+#define _ASM_X86_ELFCORE_COMPAT_H
+
+#include <asm/user32.h>
+
+/*
+ * On amd64 we have two 32bit ABIs - i386 and x32. The latter
+ * has bigger registers, so we use it for compat_elf_regset_t.
+ * The former uses i386_elf_prstatus and PRSTATUS_SIZE/SET_PR_FPVALID
+ * are used to choose the size and location of ->pr_fpvalid of
+ * the layout actually used.
+ */
+typedef struct user_regs_struct compat_elf_gregset_t;
+
+struct i386_elf_prstatus
+{
+ struct compat_elf_prstatus_common common;
+ struct user_regs_struct32 pr_reg;
+ compat_int_t pr_fpvalid;
+};
+
+#define PRSTATUS_SIZE \
+ (test_thread_flag(TIF_X32) \
+ ? sizeof(struct compat_elf_prstatus) \
+ : sizeof(struct i386_elf_prstatus))
+#define SET_PR_FPVALID(S) \
+ (*(test_thread_flag(TIF_X32) \
+ ? &(S)->pr_fpvalid \
+ : &((struct i386_elf_prstatus *)(S))->pr_fpvalid) = 1)
+
+#endif
diff --git a/fs/compat_binfmt_elf.c b/fs/compat_binfmt_elf.c
index a40df32acff5..41b51b99f492 100644
--- a/fs/compat_binfmt_elf.c
+++ b/fs/compat_binfmt_elf.c
@@ -96,14 +96,6 @@
#define ELF_EXEC_PAGESIZE COMPAT_ELF_EXEC_PAGESIZE
#endif
-#ifdef COMPAT_PRSTATUS_SIZE
-#define PRSTATUS_SIZE COMPAT_PRSTATUS_SIZE
-#endif
-
-#ifdef COMPAT_SET_PR_FPVALID
-#define SET_PR_FPVALID(S) COMPAT_SET_PR_FPVALID(S)
-#endif
-
#ifdef COMPAT_ELF_PLAT_INIT
#undef ELF_PLAT_INIT
#define ELF_PLAT_INIT COMPAT_ELF_PLAT_INIT
diff --git a/include/linux/elfcore-compat.h b/include/linux/elfcore-compat.h
index 4aeda5f1f038..e272c3d452ce 100644
--- a/include/linux/elfcore-compat.h
+++ b/include/linux/elfcore-compat.h
@@ -33,13 +33,6 @@ struct compat_elf_prstatus_common
struct old_timeval32 pr_cstime;
};
-struct compat_elf_prstatus
-{
- struct compat_elf_prstatus_common common;
- compat_elf_gregset_t pr_reg;
- compat_int_t pr_fpvalid;
-};
-
struct compat_elf_prpsinfo
{
char pr_state;
@@ -54,4 +47,15 @@ struct compat_elf_prpsinfo
char pr_psargs[ELF_PRARGSZ];
};
+#ifdef CONFIG_ARCH_HAS_ELFCORE_COMPAT
+#include <asm/elfcore-compat.h>
+#endif
+
+struct compat_elf_prstatus
+{
+ struct compat_elf_prstatus_common common;
+ compat_elf_gregset_t pr_reg;
+ compat_int_t pr_fpvalid;
+};
+
#endif /* _LINUX_ELFCORE_COMPAT_H */
--
2.11.0
next prev parent reply other threads:[~2020-12-03 21:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-03 21:45 [PATCHSET] saner elf compat Al Viro
2020-12-03 21:46 ` [PATCH 01/10] binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID Al Viro
2020-12-03 21:46 ` [PATCH 02/10] elf_prstatus: collect the common part (everything before pr_reg) into a struct Al Viro
2020-12-03 21:46 ` Al Viro [this message]
2020-12-03 21:46 ` [PATCH 04/10] mips binfmt_elf*32.c: use elfcore-compat.h Al Viro
2020-12-03 21:46 ` [PATCH 05/10] mips: kill unused definitions in binfmt_elf[on]32.c Al Viro
2020-12-03 21:46 ` [PATCH 06/10] mips: KVM_GUEST makes no sense for 64bit builds Al Viro
2020-12-03 21:46 ` [PATCH 07/10] mips compat: don't bother with ELF_ET_DYN_BASE Al Viro
2020-12-03 21:46 ` [PATCH 08/10] mips: don't bother with ELF_CORE_EFLAGS Al Viro
2020-12-03 21:46 ` [PATCH 09/10] mips compat: switch to compat_binfmt_elf.c Al Viro
2020-12-03 21:46 ` [PATCH 10/10] Kconfig: regularize selection of CONFIG_BINFMT_ELF Al Viro
2020-12-03 22:09 ` [PATCHSET] saner elf compat Linus Torvalds
2020-12-03 23:03 ` Al Viro
2020-12-06 3:23 ` Al Viro
2020-12-07 3:36 ` hpa
2020-12-07 18:01 ` Maciej W. Rozycki
2020-12-16 3:01 ` Al Viro
2020-12-16 9:44 ` Maciej W. Rozycki
2020-12-22 20:04 ` Al Viro
2020-12-22 21:38 ` Al Viro
2020-12-22 22:57 ` Al Viro
2020-12-23 7:03 ` Al Viro
2020-12-23 7:12 ` Al Viro
2020-12-24 19:44 ` [RFC][PATCH] NT_FILE/NT_SIGINFO breakage on mips compat coredumps Al Viro
2020-12-29 15:09 ` Thomas Bogendoerfer
2020-12-15 19:54 ` [PATCHSET] saner elf compat Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201203214641.3887979-3-viro@ZenIV.linux.org.uk \
--to=viro@zeniv.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®