From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Joseph Huang <Joseph.Huang@garmin.com>,
Nikolay Aleksandrov <nikolay@nvidia.com>,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH 5.4 09/34] bridge: Fix a deadlock when enabling multicast snooping
Date: Sat, 19 Dec 2020 14:03:06 +0100 [thread overview]
Message-ID: <20201219125341.836671807@linuxfoundation.org> (raw)
In-Reply-To: <20201219125341.384025953@linuxfoundation.org>
From: Joseph Huang <Joseph.Huang@garmin.com>
[ Upstream commit 851d0a73c90e6c8c63fef106c6c1e73df7e05d9d ]
When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.
The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.
The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.
Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
ip link set dev bridge type bridge mcast_snooping 1 < deadlock >
A typical call trace looks like the following:
[ 936.251495] _raw_spin_lock+0x5c/0x68
[ 936.255221] br_multicast_add_group+0x40/0x170 [bridge]
[ 936.260491] br_multicast_rcv+0x7ac/0xe30 [bridge]
[ 936.265322] br_dev_xmit+0x140/0x368 [bridge]
[ 936.269689] dev_hard_start_xmit+0x94/0x158
[ 936.273876] __dev_queue_xmit+0x5ac/0x7f8
[ 936.277890] dev_queue_xmit+0x10/0x18
[ 936.281563] neigh_resolve_output+0xec/0x198
[ 936.285845] ip6_finish_output2+0x240/0x710
[ 936.290039] __ip6_finish_output+0x130/0x170
[ 936.294318] ip6_output+0x6c/0x1c8
[ 936.297731] NF_HOOK.constprop.0+0xd8/0xe8
[ 936.301834] igmp6_send+0x358/0x558
[ 936.305326] igmp6_join_group.part.0+0x30/0xf0
[ 936.309774] igmp6_group_added+0xfc/0x110
[ 936.313787] __ipv6_dev_mc_inc+0x1a4/0x290
[ 936.317885] ipv6_dev_mc_inc+0x10/0x18
[ 936.321677] br_multicast_open+0xbc/0x110 [bridge]
[ 936.326506] br_multicast_toggle+0xec/0x140 [bridge]
Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bridge/br_device.c | 6 ++++++
net/bridge/br_multicast.c | 34 +++++++++++++++++++++++++---------
net/bridge/br_private.h | 10 ++++++++++
3 files changed, 41 insertions(+), 9 deletions(-)
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -168,6 +168,9 @@ static int br_dev_open(struct net_device
br_stp_enable_bridge(br);
br_multicast_open(br);
+ if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+ br_multicast_join_snoopers(br);
+
return 0;
}
@@ -188,6 +191,9 @@ static int br_dev_stop(struct net_device
br_stp_disable_bridge(br);
br_multicast_stop(br);
+ if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+ br_multicast_leave_snoopers(br);
+
netif_stop_queue(dev);
return 0;
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1848,7 +1848,7 @@ static inline void br_ip6_multicast_join
}
#endif
-static void br_multicast_join_snoopers(struct net_bridge *br)
+void br_multicast_join_snoopers(struct net_bridge *br)
{
br_ip4_multicast_join_snoopers(br);
br_ip6_multicast_join_snoopers(br);
@@ -1879,7 +1879,7 @@ static inline void br_ip6_multicast_leav
}
#endif
-static void br_multicast_leave_snoopers(struct net_bridge *br)
+void br_multicast_leave_snoopers(struct net_bridge *br)
{
br_ip4_multicast_leave_snoopers(br);
br_ip6_multicast_leave_snoopers(br);
@@ -1898,9 +1898,6 @@ static void __br_multicast_open(struct n
void br_multicast_open(struct net_bridge *br)
{
- if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
- br_multicast_join_snoopers(br);
-
__br_multicast_open(br, &br->ip4_own_query);
#if IS_ENABLED(CONFIG_IPV6)
__br_multicast_open(br, &br->ip6_own_query);
@@ -1916,9 +1913,6 @@ void br_multicast_stop(struct net_bridge
del_timer_sync(&br->ip6_other_query.timer);
del_timer_sync(&br->ip6_own_query.timer);
#endif
-
- if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
- br_multicast_leave_snoopers(br);
}
void br_multicast_dev_del(struct net_bridge *br)
@@ -2049,6 +2043,7 @@ static void br_multicast_start_querier(s
int br_multicast_toggle(struct net_bridge *br, unsigned long val)
{
struct net_bridge_port *port;
+ bool change_snoopers = false;
spin_lock_bh(&br->multicast_lock);
if (!!br_opt_get(br, BROPT_MULTICAST_ENABLED) == !!val)
@@ -2057,7 +2052,7 @@ int br_multicast_toggle(struct net_bridg
br_mc_disabled_update(br->dev, val);
br_opt_toggle(br, BROPT_MULTICAST_ENABLED, !!val);
if (!br_opt_get(br, BROPT_MULTICAST_ENABLED)) {
- br_multicast_leave_snoopers(br);
+ change_snoopers = true;
goto unlock;
}
@@ -2068,9 +2063,30 @@ int br_multicast_toggle(struct net_bridg
list_for_each_entry(port, &br->port_list, list)
__br_multicast_enable_port(port);
+ change_snoopers = true;
+
unlock:
spin_unlock_bh(&br->multicast_lock);
+ /* br_multicast_join_snoopers has the potential to cause
+ * an MLD Report/Leave to be delivered to br_multicast_rcv,
+ * which would in turn call br_multicast_add_group, which would
+ * attempt to acquire multicast_lock. This function should be
+ * called after the lock has been released to avoid deadlocks on
+ * multicast_lock.
+ *
+ * br_multicast_leave_snoopers does not have the problem since
+ * br_multicast_rcv first checks BROPT_MULTICAST_ENABLED, and
+ * returns without calling br_multicast_ipv4/6_rcv if it's not
+ * enabled. Moved both functions out just for symmetry.
+ */
+ if (change_snoopers) {
+ if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+ br_multicast_join_snoopers(br);
+ else
+ br_multicast_leave_snoopers(br);
+ }
+
return 0;
}
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -665,6 +665,8 @@ void br_multicast_del_port(struct net_br
void br_multicast_enable_port(struct net_bridge_port *port);
void br_multicast_disable_port(struct net_bridge_port *port);
void br_multicast_init(struct net_bridge *br);
+void br_multicast_join_snoopers(struct net_bridge *br);
+void br_multicast_leave_snoopers(struct net_bridge *br);
void br_multicast_open(struct net_bridge *br);
void br_multicast_stop(struct net_bridge *br);
void br_multicast_dev_del(struct net_bridge *br);
@@ -792,6 +794,14 @@ static inline void br_multicast_init(str
{
}
+static inline void br_multicast_join_snoopers(struct net_bridge *br)
+{
+}
+
+static inline void br_multicast_leave_snoopers(struct net_bridge *br)
+{
+}
+
static inline void br_multicast_open(struct net_bridge *br)
{
}
next prev parent reply other threads:[~2020-12-19 13:04 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-19 13:02 [PATCH 5.4 00/34] 5.4.85-rc1 review Greg Kroah-Hartman
2020-12-19 13:02 ` [PATCH 5.4 01/34] ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info() Greg Kroah-Hartman
2020-12-19 13:02 ` [PATCH 5.4 02/34] ipv4: fix error return code in rtm_to_fib_config() Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 03/34] mac80211: mesh: fix mesh_pathtbl_init() error path Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 04/34] net: bridge: vlan: fix error return code in __vlan_add() Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 05/34] vrf: packets with lladdr src needs dst at input with orig_iif when needs strict Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 06/34] net: hns3: remove a misused pragma packed Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 07/34] udp: fix the proto value passed to ip_protocol_deliver_rcu for the segments Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 08/34] enetc: Fix reporting of h/w packet counters Greg Kroah-Hartman
2020-12-19 13:03 ` Greg Kroah-Hartman [this message]
2020-12-19 13:03 ` [PATCH 5.4 10/34] net: stmmac: free tx skb buffer in stmmac_resume() Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 11/34] tcp: select sane initial rcvq_space.space for big MSS Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 12/34] tcp: fix cwnd-limited bug for TSO deferral where we send nothing Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 13/34] net/mlx4_en: Avoid scheduling restart task if it is already running Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 14/34] lan743x: fix for potential NULL pointer dereference with bare card Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 15/34] net/mlx4_en: Handle TX error CQE Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 16/34] net: ll_temac: Fix potential NULL dereference in temac_probe() Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 17/34] net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 18/34] net: stmmac: delete the eee_ctrl_timer after napi disabled Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 19/34] ktest.pl: If size of log is too big to email, email error message Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 20/34] USB: dummy-hcd: Fix uninitialized array use in init() Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 21/34] USB: add RESET_RESUME quirk for Snapscan 1212 Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 22/34] ALSA: usb-audio: Fix potential out-of-bounds shift Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 23/34] ALSA: usb-audio: Fix control access overflow errors from chmap Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 24/34] xhci: Give USB2 ports time to enter U3 in bus suspend Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 25/34] xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 26/34] USB: UAS: introduce a quirk to set no_write_same Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 27/34] USB: sisusbvga: Make console support depend on BROKEN Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 28/34] ALSA: pcm: oss: Fix potential out-of-bounds shift Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 29/34] serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 30/34] KVM: mmu: Fix SPTE encoding of MMIO generation upper half Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 31/34] Revert "selftests/ftrace: check for do_sys_openat2 in user-memory test" Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 32/34] membarrier: Explicitly sync remote cores when SYNC_CORE is requested Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 33/34] x86/resctrl: Remove unused struct mbm_state::chunks_bw Greg Kroah-Hartman
2020-12-19 13:03 ` [PATCH 5.4 34/34] x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled Greg Kroah-Hartman
2020-12-19 21:49 ` [PATCH 5.4 00/34] 5.4.85-rc1 review Guenter Roeck
2020-12-20 3:58 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201219125341.836671807@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Joseph.Huang@garmin.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nikolay@nvidia.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome