mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Joseph Huang <Joseph.Huang@garmin.com>,
	Nikolay Aleksandrov <nikolay@nvidia.com>,
	Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH 5.9 12/49] bridge: Fix a deadlock when enabling multicast snooping
Date: Sat, 19 Dec 2020 13:58:16 +0100	[thread overview]
Message-ID: <20201219125345.277579762@linuxfoundation.org> (raw)
In-Reply-To: <20201219125344.671832095@linuxfoundation.org>

From: Joseph Huang <Joseph.Huang@garmin.com>

[ Upstream commit 851d0a73c90e6c8c63fef106c6c1e73df7e05d9d ]

When enabling multicast snooping, bridge module deadlocks on multicast_lock
if 1) IPv6 is enabled, and 2) there is an existing querier on the same L2
network.

The deadlock was caused by the following sequence: While holding the lock,
br_multicast_open calls br_multicast_join_snoopers, which eventually causes
IP stack to (attempt to) send out a Listener Report (in igmp6_join_group).
Since the destination Ethernet address is a multicast address, br_dev_xmit
feeds the packet back to the bridge via br_multicast_rcv, which in turn
calls br_multicast_add_group, which then deadlocks on multicast_lock.

The fix is to move the call br_multicast_join_snoopers outside of the
critical section. This works since br_multicast_join_snoopers only deals
with IP and does not modify any multicast data structures of the bridge,
so there's no need to hold the lock.

Steps to reproduce:
1. sysctl net.ipv6.conf.all.force_mld_version=1
2. have another querier
3. ip link set dev bridge type bridge mcast_snooping 0 && \
   ip link set dev bridge type bridge mcast_snooping 1 < deadlock >

A typical call trace looks like the following:

[  936.251495]  _raw_spin_lock+0x5c/0x68
[  936.255221]  br_multicast_add_group+0x40/0x170 [bridge]
[  936.260491]  br_multicast_rcv+0x7ac/0xe30 [bridge]
[  936.265322]  br_dev_xmit+0x140/0x368 [bridge]
[  936.269689]  dev_hard_start_xmit+0x94/0x158
[  936.273876]  __dev_queue_xmit+0x5ac/0x7f8
[  936.277890]  dev_queue_xmit+0x10/0x18
[  936.281563]  neigh_resolve_output+0xec/0x198
[  936.285845]  ip6_finish_output2+0x240/0x710
[  936.290039]  __ip6_finish_output+0x130/0x170
[  936.294318]  ip6_output+0x6c/0x1c8
[  936.297731]  NF_HOOK.constprop.0+0xd8/0xe8
[  936.301834]  igmp6_send+0x358/0x558
[  936.305326]  igmp6_join_group.part.0+0x30/0xf0
[  936.309774]  igmp6_group_added+0xfc/0x110
[  936.313787]  __ipv6_dev_mc_inc+0x1a4/0x290
[  936.317885]  ipv6_dev_mc_inc+0x10/0x18
[  936.321677]  br_multicast_open+0xbc/0x110 [bridge]
[  936.326506]  br_multicast_toggle+0xec/0x140 [bridge]

Fixes: 4effd28c1245 ("bridge: join all-snoopers multicast address")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201204235628.50653-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_device.c    |    6 ++++++
 net/bridge/br_multicast.c |   34 +++++++++++++++++++++++++---------
 net/bridge/br_private.h   |   10 ++++++++++
 3 files changed, 41 insertions(+), 9 deletions(-)

--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -177,6 +177,9 @@ static int br_dev_open(struct net_device
 	br_stp_enable_bridge(br);
 	br_multicast_open(br);
 
+	if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+		br_multicast_join_snoopers(br);
+
 	return 0;
 }
 
@@ -197,6 +200,9 @@ static int br_dev_stop(struct net_device
 	br_stp_disable_bridge(br);
 	br_multicast_stop(br);
 
+	if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+		br_multicast_leave_snoopers(br);
+
 	netif_stop_queue(dev);
 
 	return 0;
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1848,7 +1848,7 @@ static inline void br_ip6_multicast_join
 }
 #endif
 
-static void br_multicast_join_snoopers(struct net_bridge *br)
+void br_multicast_join_snoopers(struct net_bridge *br)
 {
 	br_ip4_multicast_join_snoopers(br);
 	br_ip6_multicast_join_snoopers(br);
@@ -1879,7 +1879,7 @@ static inline void br_ip6_multicast_leav
 }
 #endif
 
-static void br_multicast_leave_snoopers(struct net_bridge *br)
+void br_multicast_leave_snoopers(struct net_bridge *br)
 {
 	br_ip4_multicast_leave_snoopers(br);
 	br_ip6_multicast_leave_snoopers(br);
@@ -1898,9 +1898,6 @@ static void __br_multicast_open(struct n
 
 void br_multicast_open(struct net_bridge *br)
 {
-	if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
-		br_multicast_join_snoopers(br);
-
 	__br_multicast_open(br, &br->ip4_own_query);
 #if IS_ENABLED(CONFIG_IPV6)
 	__br_multicast_open(br, &br->ip6_own_query);
@@ -1916,9 +1913,6 @@ void br_multicast_stop(struct net_bridge
 	del_timer_sync(&br->ip6_other_query.timer);
 	del_timer_sync(&br->ip6_own_query.timer);
 #endif
-
-	if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
-		br_multicast_leave_snoopers(br);
 }
 
 void br_multicast_dev_del(struct net_bridge *br)
@@ -2049,6 +2043,7 @@ static void br_multicast_start_querier(s
 int br_multicast_toggle(struct net_bridge *br, unsigned long val)
 {
 	struct net_bridge_port *port;
+	bool change_snoopers = false;
 
 	spin_lock_bh(&br->multicast_lock);
 	if (!!br_opt_get(br, BROPT_MULTICAST_ENABLED) == !!val)
@@ -2057,7 +2052,7 @@ int br_multicast_toggle(struct net_bridg
 	br_mc_disabled_update(br->dev, val);
 	br_opt_toggle(br, BROPT_MULTICAST_ENABLED, !!val);
 	if (!br_opt_get(br, BROPT_MULTICAST_ENABLED)) {
-		br_multicast_leave_snoopers(br);
+		change_snoopers = true;
 		goto unlock;
 	}
 
@@ -2068,9 +2063,30 @@ int br_multicast_toggle(struct net_bridg
 	list_for_each_entry(port, &br->port_list, list)
 		__br_multicast_enable_port(port);
 
+	change_snoopers = true;
+
 unlock:
 	spin_unlock_bh(&br->multicast_lock);
 
+	/* br_multicast_join_snoopers has the potential to cause
+	 * an MLD Report/Leave to be delivered to br_multicast_rcv,
+	 * which would in turn call br_multicast_add_group, which would
+	 * attempt to acquire multicast_lock. This function should be
+	 * called after the lock has been released to avoid deadlocks on
+	 * multicast_lock.
+	 *
+	 * br_multicast_leave_snoopers does not have the problem since
+	 * br_multicast_rcv first checks BROPT_MULTICAST_ENABLED, and
+	 * returns without calling br_multicast_ipv4/6_rcv if it's not
+	 * enabled. Moved both functions out just for symmetry.
+	 */
+	if (change_snoopers) {
+		if (br_opt_get(br, BROPT_MULTICAST_ENABLED))
+			br_multicast_join_snoopers(br);
+		else
+			br_multicast_leave_snoopers(br);
+	}
+
 	return 0;
 }
 
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -745,6 +745,8 @@ void br_multicast_del_port(struct net_br
 void br_multicast_enable_port(struct net_bridge_port *port);
 void br_multicast_disable_port(struct net_bridge_port *port);
 void br_multicast_init(struct net_bridge *br);
+void br_multicast_join_snoopers(struct net_bridge *br);
+void br_multicast_leave_snoopers(struct net_bridge *br);
 void br_multicast_open(struct net_bridge *br);
 void br_multicast_stop(struct net_bridge *br);
 void br_multicast_dev_del(struct net_bridge *br);
@@ -872,6 +874,14 @@ static inline void br_multicast_init(str
 {
 }
 
+static inline void br_multicast_join_snoopers(struct net_bridge *br)
+{
+}
+
+static inline void br_multicast_leave_snoopers(struct net_bridge *br)
+{
+}
+
 static inline void br_multicast_open(struct net_bridge *br)
 {
 }



  parent reply	other threads:[~2020-12-19 12:58 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-19 12:58 [PATCH 5.9 00/49] 5.9.16-rc1 review Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 01/49] ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 02/49] net/sched: fq_pie: initialize timer earlier in fq_pie_init() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 03/49] net: ipa: pass the correct size when freeing DMA memory Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 04/49] ipv4: fix error return code in rtm_to_fib_config() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 05/49] mac80211: mesh: fix mesh_pathtbl_init() error path Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 06/49] net: bridge: vlan: fix error return code in __vlan_add() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 07/49] vrf: packets with lladdr src needs dst at input with orig_iif when needs strict Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 08/49] net: mscc: ocelot: fix dropping of unknown IPv4 multicast on Seville Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 09/49] net: hns3: remove a misused pragma packed Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 10/49] udp: fix the proto value passed to ip_protocol_deliver_rcu for the segments Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 11/49] enetc: Fix reporting of h/w packet counters Greg Kroah-Hartman
2020-12-19 12:58 ` Greg Kroah-Hartman [this message]
2020-12-19 12:58 ` [PATCH 5.9 13/49] mptcp: print new line in mptcp_seq_show() if mptcp isnt in use Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 14/49] net: stmmac: dwmac-meson8b: fix mask definition of the m250_sel mux Greg Kroah-Hartman
2020-12-19 21:51   ` Pavel Machek
2020-12-19 22:38     ` Martin Blumenstingl
2020-12-19 23:13       ` Pavel Machek
2020-12-21 14:31         ` Martin Blumenstingl
2020-12-19 12:58 ` [PATCH 5.9 15/49] net: stmmac: start phylink instance before stmmac_hw_setup() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 16/49] net: stmmac: free tx skb buffer in stmmac_resume() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 17/49] net: stmmac: delete the eee_ctrl_timer after napi disabled Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 18/49] net: stmmac: overwrite the dma_cap.addr64 according to HW design Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 19/49] net: ll_temac: Fix potential NULL dereference in temac_probe() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 20/49] tcp: select sane initial rcvq_space.space for big MSS Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 21/49] e1000e: fix S0ix flow to allow S0i3.2 subset entry Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 22/49] ethtool: fix stack overflow in ethnl_parse_bitset() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 23/49] tcp: fix cwnd-limited bug for TSO deferral where we send nothing Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 24/49] net: flow_offload: Fix memory leak for indirect flow block Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 25/49] net/mlx4_en: Avoid scheduling restart task if it is already running Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 26/49] net/mlx4_en: Handle TX error CQE Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 27/49] net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 28/49] bonding: fix feature flag setting at init time Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 29/49] ch_ktls: fix build warning for ipv4-only config Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 30/49] lan743x: fix for potential NULL pointer dereference with bare card Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 31/49] net: stmmac: increase the timeout for dma reset Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 32/49] net: tipc: prevent possible null deref of link Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 33/49] ktest.pl: If size of log is too big to email, email error message Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 34/49] ktest.pl: Fix the logic for truncating the size of the log file for email Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 35/49] USB: dummy-hcd: Fix uninitialized array use in init() Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 36/49] USB: add RESET_RESUME quirk for Snapscan 1212 Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 37/49] ALSA: usb-audio: Fix potential out-of-bounds shift Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 38/49] ALSA: usb-audio: Fix control access overflow errors from chmap Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 39/49] xhci: Give USB2 ports time to enter U3 in bus suspend Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 40/49] xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 41/49] xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 42/49] USB: UAS: introduce a quirk to set no_write_same Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 43/49] USB: sisusbvga: Make console support depend on BROKEN Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 44/49] ALSA: pcm: oss: Fix potential out-of-bounds shift Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 45/49] serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 46/49] KVM: mmu: Fix SPTE encoding of MMIO generation upper half Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 47/49] membarrier: Explicitly sync remote cores when SYNC_CORE is requested Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 48/49] x86/resctrl: Remove unused struct mbm_state::chunks_bw Greg Kroah-Hartman
2020-12-19 12:58 ` [PATCH 5.9 49/49] x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled Greg Kroah-Hartman
2020-12-19 21:49 ` [PATCH 5.9 00/49] 5.9.16-rc1 review Guenter Roeck
2020-12-20  3:51 ` Naresh Kamboju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201219125345.277579762@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=Joseph.Huang@garmin.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nikolay@nvidia.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome