mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kent Gibson <warthog618@gmail.com>
To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	bgolaszewski@baylibre.com, linus.walleij@linaro.org
Cc: Kent Gibson <warthog618@gmail.com>, kernel test robot <lkp@intel.com>
Subject: [PATCH] gpiolib: cdev: fix frame size warning in gpio_ioctl()
Date: Mon, 28 Dec 2020 00:10:40 +0800	[thread overview]
Message-ID: <20201227161040.1645545-1-warthog618@gmail.com> (raw)

The kernel test robot reports the following warning in [1]:

 drivers/gpio/gpiolib-cdev.c: In function 'gpio_ioctl':
 >>drivers/gpio/gpiolib-cdev.c:1437:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Refactor gpio_ioctl() to handle each ioctl in its own helper function
and so reduce the variables stored on the stack to those explicitly
required to service the ioctl at hand.

The lineinfo_get_v1() helper handles both the GPIO_GET_LINEINFO_IOCTL
and GPIO_GET_LINEINFO_WATCH_IOCTL, as per the corresponding v2
implementation - lineinfo_get().

[1] https://lore.kernel.org/lkml/202012270910.VW3qc1ER-lkp@intel.com/

Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpiolib-cdev.c | 145 ++++++++++++++++++------------------
 1 file changed, 73 insertions(+), 72 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 12b679ca552c..1a7b51163528 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -1979,6 +1979,21 @@ struct gpio_chardev_data {
 #endif
 };
 
+static int chipinfo_get(struct gpio_chardev_data *cdev, void __user *ip)
+{
+	struct gpio_device *gdev = cdev->gdev;
+	struct gpiochip_info chipinfo;
+
+	memset(&chipinfo, 0, sizeof(chipinfo));
+
+	strscpy(chipinfo.name, dev_name(&gdev->dev), sizeof(chipinfo.name));
+	strscpy(chipinfo.label, gdev->label, sizeof(chipinfo.label));
+	chipinfo.lines = gdev->ngpio;
+	if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
+		return -EFAULT;
+	return 0;
+}
+
 #ifdef CONFIG_GPIO_CDEV_V1
 /*
  * returns 0 if the versions match, else the previously selected ABI version
@@ -1993,6 +2008,41 @@ static int lineinfo_ensure_abi_version(struct gpio_chardev_data *cdata,
 
 	return abiv;
 }
+
+static int lineinfo_get_v1(struct gpio_chardev_data *cdev, void __user *ip,
+			   bool watch)
+{
+	struct gpio_desc *desc;
+	struct gpioline_info lineinfo;
+	struct gpio_v2_line_info lineinfo_v2;
+
+	if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
+		return -EFAULT;
+
+	/* this doubles as a range check on line_offset */
+	desc = gpiochip_get_desc(cdev->gdev->chip, lineinfo.line_offset);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	if (watch) {
+		if (lineinfo_ensure_abi_version(cdev, 1))
+			return -EPERM;
+
+		if (test_and_set_bit(lineinfo.line_offset, cdev->watched_lines))
+			return -EBUSY;
+	}
+
+	gpio_desc_to_lineinfo(desc, &lineinfo_v2);
+	gpio_v2_line_info_to_v1(&lineinfo_v2, &lineinfo);
+
+	if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) {
+		if (watch)
+			clear_bit(lineinfo.line_offset, cdev->watched_lines);
+		return -EFAULT;
+	}
+
+	return 0;
+}
 #endif
 
 static int lineinfo_get(struct gpio_chardev_data *cdev, void __user *ip,
@@ -2030,6 +2080,22 @@ static int lineinfo_get(struct gpio_chardev_data *cdev, void __user *ip,
 	return 0;
 }
 
+static int lineinfo_unwatch(struct gpio_chardev_data *cdev, void __user *ip)
+{
+	__u32 offset;
+
+	if (copy_from_user(&offset, ip, sizeof(offset)))
+		return -EFAULT;
+
+	if (offset >= cdev->gdev->ngpio)
+		return -EINVAL;
+
+	if (!test_and_clear_bit(offset, cdev->watched_lines))
+		return -EBUSY;
+
+	return 0;
+}
+
 /*
  * gpio_ioctl() - ioctl handler for the GPIO chardev
  */
@@ -2037,80 +2103,24 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct gpio_chardev_data *cdev = file->private_data;
 	struct gpio_device *gdev = cdev->gdev;
-	struct gpio_chip *gc = gdev->chip;
 	void __user *ip = (void __user *)arg;
-	__u32 offset;
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
-	if (!gc)
+	if (!gdev->chip)
 		return -ENODEV;
 
 	/* Fill in the struct and pass to userspace */
 	if (cmd == GPIO_GET_CHIPINFO_IOCTL) {
-		struct gpiochip_info chipinfo;
-
-		memset(&chipinfo, 0, sizeof(chipinfo));
-
-		strscpy(chipinfo.name, dev_name(&gdev->dev),
-			sizeof(chipinfo.name));
-		strscpy(chipinfo.label, gdev->label,
-			sizeof(chipinfo.label));
-		chipinfo.lines = gdev->ngpio;
-		if (copy_to_user(ip, &chipinfo, sizeof(chipinfo)))
-			return -EFAULT;
-		return 0;
+		return chipinfo_get(cdev, ip);
 #ifdef CONFIG_GPIO_CDEV_V1
-	} else if (cmd == GPIO_GET_LINEINFO_IOCTL) {
-		struct gpio_desc *desc;
-		struct gpioline_info lineinfo;
-		struct gpio_v2_line_info lineinfo_v2;
-
-		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
-			return -EFAULT;
-
-		/* this doubles as a range check on line_offset */
-		desc = gpiochip_get_desc(gc, lineinfo.line_offset);
-		if (IS_ERR(desc))
-			return PTR_ERR(desc);
-
-		gpio_desc_to_lineinfo(desc, &lineinfo_v2);
-		gpio_v2_line_info_to_v1(&lineinfo_v2, &lineinfo);
-
-		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
-			return -EFAULT;
-		return 0;
 	} else if (cmd == GPIO_GET_LINEHANDLE_IOCTL) {
 		return linehandle_create(gdev, ip);
 	} else if (cmd == GPIO_GET_LINEEVENT_IOCTL) {
 		return lineevent_create(gdev, ip);
-	} else if (cmd == GPIO_GET_LINEINFO_WATCH_IOCTL) {
-		struct gpio_desc *desc;
-		struct gpioline_info lineinfo;
-		struct gpio_v2_line_info lineinfo_v2;
-
-		if (copy_from_user(&lineinfo, ip, sizeof(lineinfo)))
-			return -EFAULT;
-
-		/* this doubles as a range check on line_offset */
-		desc = gpiochip_get_desc(gc, lineinfo.line_offset);
-		if (IS_ERR(desc))
-			return PTR_ERR(desc);
-
-		if (lineinfo_ensure_abi_version(cdev, 1))
-			return -EPERM;
-
-		if (test_and_set_bit(lineinfo.line_offset, cdev->watched_lines))
-			return -EBUSY;
-
-		gpio_desc_to_lineinfo(desc, &lineinfo_v2);
-		gpio_v2_line_info_to_v1(&lineinfo_v2, &lineinfo);
-
-		if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) {
-			clear_bit(lineinfo.line_offset, cdev->watched_lines);
-			return -EFAULT;
-		}
-
-		return 0;
+	} else if (cmd == GPIO_GET_LINEINFO_IOCTL ||
+		   cmd == GPIO_GET_LINEINFO_WATCH_IOCTL) {
+		return lineinfo_get_v1(cdev, ip,
+				       cmd == GPIO_GET_LINEINFO_WATCH_IOCTL);
 #endif /* CONFIG_GPIO_CDEV_V1 */
 	} else if (cmd == GPIO_V2_GET_LINEINFO_IOCTL ||
 		   cmd == GPIO_V2_GET_LINEINFO_WATCH_IOCTL) {
@@ -2119,16 +2129,7 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	} else if (cmd == GPIO_V2_GET_LINE_IOCTL) {
 		return linereq_create(gdev, ip);
 	} else if (cmd == GPIO_GET_LINEINFO_UNWATCH_IOCTL) {
-		if (copy_from_user(&offset, ip, sizeof(offset)))
-			return -EFAULT;
-
-		if (offset >= cdev->gdev->ngpio)
-			return -EINVAL;
-
-		if (!test_and_clear_bit(offset, cdev->watched_lines))
-			return -EBUSY;
-
-		return 0;
+		return lineinfo_unwatch(cdev, ip);
 	}
 	return -EINVAL;
 }
-- 
2.29.2


             reply	other threads:[~2020-12-27 16:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-27 16:10 Kent Gibson [this message]
2020-12-27 21:37 ` Linus Walleij
2021-01-03 15:34   ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201227161040.1645545-1-warthog618@gmail.com \
    --to=warthog618@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkp@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®