mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: lianzhi chang <changlianzhi@uniontech.com>
Cc: jack@suse.cz, magnani@ieee.org, linux-kernel@vger.kernel.org,
	282827961@qq.com
Subject: Re: [PATCH] udf: fix the problem that the disc content is not displayed
Date: Thu, 14 Jan 2021 18:15:17 +0100	[thread overview]
Message-ID: <20210114171517.GC27380@quack2.suse.cz> (raw)
In-Reply-To: <20210114132615.16522-1-changlianzhi@uniontech.com>

On Thu 14-01-21 21:26:15, lianzhi chang wrote:
> When the capacity of the disc is too large (assuming the 4.7G
> specification), the disc (UDF file system) will be burned
> multiple times in the windows (Multisession Usage). When the
> remaining capacity of the CD is less than 300M (estimated
> value, for reference only), open the CD in the Linux system,
> the content of the CD is displayed as blank (the kernel will
> say "No VRS found"). Windows can display the contents of the
> CD normally.
> Through analysis, in the "fs/udf/super.c": udf_check_vsd
> function, the actual value of VSD_MAX_SECTOR_OFFSET may
> be much larger than 0x800000. According to the current code
> logic, it is found that the type of sbi->s_session is "__s32",
>  when the remaining capacity of the disc is less than 300M
> (take a set of test values: sector=3154903040,
> sbi->s_session=1540464, sb->s_blocksize_bits=11 ), the
> calculation result of "sbi->s_session << sb->s_blocksize_bits"
>  will overflow. Therefore, it is necessary to convert the
> type of s_session to "loff_t" (when udf_check_vsd starts,
> assign a value to _sector, which is also converted in this
> way), so that the result will not overflow, and then the
> content of the disc can be displayed normally.
> 
> Signed-off-by: lianzhi chang <changlianzhi@uniontech.com>

There was no need to resend the patch (I've fixed up the problem locally -
it was easy enough) but thanks anyway :).

								Honza

> ---
>  fs/udf/super.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/udf/super.c b/fs/udf/super.c
> index 5bef3a68395d..f2ff98f393fb 100644
> --- a/fs/udf/super.c
> +++ b/fs/udf/super.c
> @@ -705,6 +705,7 @@ static int udf_check_vsd(struct super_block *sb)
>  	struct buffer_head *bh = NULL;
>  	int nsr = 0;
>  	struct udf_sb_info *sbi;
> +	loff_t sector_offset;
>  
>  	sbi = UDF_SB(sb);
>  	if (sb->s_blocksize < sizeof(struct volStructDesc))
> @@ -712,7 +713,8 @@ static int udf_check_vsd(struct super_block *sb)
>  	else
>  		sectorsize = sb->s_blocksize;
>  
> -	sector += (((loff_t)sbi->s_session) << sb->s_blocksize_bits);
> +	sector_offset = (loff_t)sbi->s_session << sb->s_blocksize_bits;
> +	sector += sector_offset;
>  
>  	udf_debug("Starting at sector %u (%lu byte sectors)\n",
>  		  (unsigned int)(sector >> sb->s_blocksize_bits),
> @@ -757,8 +759,7 @@ static int udf_check_vsd(struct super_block *sb)
>  
>  	if (nsr > 0)
>  		return 1;
> -	else if (!bh && sector - (sbi->s_session << sb->s_blocksize_bits) ==
> -			VSD_FIRST_SECTOR_OFFSET)
> +	else if (!bh && sector - sector_offset == VSD_FIRST_SECTOR_OFFSET)
>  		return -1;
>  	else
>  		return 0;
> -- 
> 2.20.1
> 
> 
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

  reply	other threads:[~2021-01-14 17:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-14 13:26 lianzhi chang
2021-01-14 17:15 ` Jan Kara [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-01-14  7:57 lianzhi chang
2021-01-14 10:41 ` Jan Kara
2021-01-14 11:06 ` kernel test robot
2021-01-12  5:53 lianzhi chang
2021-01-13 12:51 ` Steve Magnani
     [not found]   ` <1400033179.660265.1610592703732.JavaMail.xmail@bj-wm-cp-9>
2021-01-14  3:21     ` Steve Magnani
2021-01-13 22:25       ` changlianzhi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210114171517.GC27380@quack2.suse.cz \
    --to=jack@suse.cz \
    --cc=282827961@qq.com \
    --cc=changlianzhi@uniontech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=magnani@ieee.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®