From: mohammad.athari.ismail@intel.com
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Weifeng <weifeng.voon@intel.com>,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, mohammad.athari.ismail@intel.com
Subject: [PATCH net] stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
Date: Tue, 26 Jan 2021 18:08:44 +0800 [thread overview]
Message-ID: <20210126100844.30326-1-mohammad.athari.ismail@intel.com> (raw)
From: Voon Weifeng <weifeng.voon@intel.com>
Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.
[ 25.535095] ------------[ cut here ]------------
[ 25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[ 25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[ 25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[ 25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G U 5.11.0-rc4-intel-lts-MISMAIL5+ #5
[ 25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[ 25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[ 25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[ 25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[ 25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[ 25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[ 25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[ 25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[ 25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[ 25.731425] FS: 0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[ 25.740481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[ 25.754900] Call Trace:
[ 25.757631] <IRQ>
[ 25.759891] ? qdisc_put_unlocked+0x30/0x30
[ 25.764565] ? qdisc_put_unlocked+0x30/0x30
[ 25.769245] call_timer_fn+0x2e/0x140
[ 25.773346] run_timer_softirq+0x1f3/0x430
[ 25.777932] ? __hrtimer_run_queues+0x12c/0x2c0
[ 25.783005] ? ktime_get+0x3e/0xa0
[ 25.786812] __do_softirq+0xa6/0x2ef
[ 25.790816] asm_call_irq_on_stack+0xf/0x20
[ 25.795501] </IRQ>
[ 25.797852] do_softirq_own_stack+0x5d/0x80
[ 25.802538] irq_exit_rcu+0x94/0xb0
[ 25.806475] sysvec_apic_timer_interrupt+0x42/0xc0
[ 25.811836] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[ 25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[ 25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[ 25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[ 25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[ 25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[ 25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[ 25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[ 25.889918] cpuidle_enter+0x29/0x40
[ 25.893922] do_idle+0x24a/0x290
[ 25.897536] cpu_startup_entry+0x19/0x20
[ 25.901930] start_secondary+0x128/0x160
[ 25.906326] secondary_startup_64_no_verify+0xb0/0xbb
[ 25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[ 25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.
Fixes: 67c08ac4140a ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 9a6a519426a0..103d2448e9e0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -375,6 +375,7 @@ static int ehl_pse0_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 2;
+ plat->addr64 = 32;
return ehl_common_data(pdev, plat);
}
@@ -406,6 +407,7 @@ static int ehl_pse1_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
plat->bus_id = 3;
+ plat->addr64 = 32;
return ehl_common_data(pdev, plat);
}
--
2.17.1
next reply other threads:[~2021-01-26 12:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-26 10:08 mohammad.athari.ismail [this message]
2021-01-28 21:20 ` patchwork-bot+netdevbpf
2021-01-29 2:05 ` Ismail, Mohammad Athari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126100844.30326-1-mohammad.athari.ismail@intel.com \
--to=mohammad.athari.ismail@intel.com \
--cc=alexandre.torgue@st.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®