From: Scott Branden <scott.branden@broadcom.com>
To: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Olof Johansson <olof@lixom.net>,
Desmond Yan <desmond.yan@broadcom.com>
Subject: [PATCH v2] misc: bcm-vk: only support ttyVK if CONFIG_TTY is set
Date: Fri, 29 Jan 2021 14:06:27 -0800 [thread overview]
Message-ID: <20210129220627.22641-1-scott.branden@broadcom.com> (raw)
Correct compile issue if CONFIG_TTY is not set by
only adding ttyVK devices if CONFIG_TTY is set.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
Changes since v1:
Add function stubs rather than compiling out code
---
drivers/misc/bcm-vk/Makefile | 4 ++--
drivers/misc/bcm-vk/bcm_vk.h | 35 +++++++++++++++++++++++++++++---
drivers/misc/bcm-vk/bcm_vk_dev.c | 3 +--
drivers/misc/bcm-vk/bcm_vk_tty.c | 6 ++++++
4 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/bcm-vk/Makefile b/drivers/misc/bcm-vk/Makefile
index e4a1486f7209..8d81a734fcad 100644
--- a/drivers/misc/bcm-vk/Makefile
+++ b/drivers/misc/bcm-vk/Makefile
@@ -7,6 +7,6 @@ obj-$(CONFIG_BCM_VK) += bcm_vk.o
bcm_vk-objs := \
bcm_vk_dev.o \
bcm_vk_msg.o \
- bcm_vk_sg.o \
- bcm_vk_tty.o
+ bcm_vk_sg.o
+bcm_vk-$(CONFIG_TTY) += bcm_vk_tty.o
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index 3f37c640a814..4a1d515374c7 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -258,7 +258,11 @@ enum pci_barno {
BAR_2
};
+#ifdef CONFIG_TTY
#define BCM_VK_NUM_TTY 2
+#else
+#define BCM_VK_NUM_TTY 0
+#endif
struct bcm_vk_tty {
struct tty_port port;
@@ -366,11 +370,15 @@ struct bcm_vk {
struct miscdevice miscdev;
int devid; /* dev id allocated */
+#ifdef CONFIG_TTY
struct tty_driver *tty_drv;
struct timer_list serial_timer;
struct bcm_vk_tty tty[BCM_VK_NUM_TTY];
struct workqueue_struct *tty_wq_thread;
struct work_struct tty_wq_work;
+#else
+ struct bcm_vk_tty *tty;
+#endif
/* Reference-counting to handle file operations */
struct kref kref;
@@ -501,13 +509,34 @@ int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type,
const pid_t pid, const u32 q_num);
void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val);
int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
-int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
-void bcm_vk_tty_exit(struct bcm_vk *vk);
-void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
void bcm_vk_hb_init(struct bcm_vk *vk);
void bcm_vk_hb_deinit(struct bcm_vk *vk);
void bcm_vk_handle_notf(struct bcm_vk *vk);
bool bcm_vk_drv_access_ok(struct bcm_vk *vk);
void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask);
+#ifdef CONFIG_TTY
+int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
+void bcm_vk_tty_exit(struct bcm_vk *vk);
+void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
+void bcm_vk_tty_wq_exit(struct bcm_vk *vk);
+#else
+static inline int bcm_vk_tty_init(struct bcm_vk *vk, char *name)
+{
+ return 0;
+}
+
+static inline void bcm_vk_tty_exit(struct bcm_vk *vk)
+{
+}
+
+static inline void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
+{
+}
+
+static inline void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
+{
+}
+#endif /* CONFIG_TTY */
+
#endif
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index c3d2bba68ef1..5d2030b67007 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -1580,8 +1580,7 @@ static void bcm_vk_remove(struct pci_dev *pdev)
cancel_work_sync(&vk->wq_work);
destroy_workqueue(vk->wq_thread);
- cancel_work_sync(&vk->tty_wq_work);
- destroy_workqueue(vk->tty_wq_thread);
+ bcm_vk_tty_wq_exit(vk);
for (i = 0; i < MAX_BAR; i++) {
if (vk->bar[i])
diff --git a/drivers/misc/bcm-vk/bcm_vk_tty.c b/drivers/misc/bcm-vk/bcm_vk_tty.c
index be3964949b63..4d02692ecfc7 100644
--- a/drivers/misc/bcm-vk/bcm_vk_tty.c
+++ b/drivers/misc/bcm-vk/bcm_vk_tty.c
@@ -331,3 +331,9 @@ void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
kill_pid(find_vpid(vktty->pid), SIGKILL, 1);
}
}
+
+void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
+{
+ cancel_work_sync(&vk->tty_wq_work);
+ destroy_workqueue(vk->tty_wq_thread);
+}
--
2.17.1
next reply other threads:[~2021-01-29 22:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-29 22:06 Scott Branden [this message]
2021-01-29 22:41 ` Randy Dunlap
2021-01-30 8:55 ` Greg Kroah-Hartman
2021-01-30 23:26 ` Scott Branden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210129220627.22641-1-scott.branden@broadcom.com \
--to=scott.branden@broadcom.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=desmond.yan@broadcom.com \
--cc=gregkh@linuxfoundation.org \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®