[PATCH] hwmon: lm75: Use zero lm75_type for lm75

["Matwey V. Kornilov" <matwey@sai.msu.ru>]

There is a logical flaw in lm75_probe() function introduced in

    e97a45f1b460 ("hwmon: (lm75) Add OF device ID table")

Note, that of_device_get_match_data() returns NULL when no match
found. This is the case when OF node exists but has unknown
compatible line, while the module is still loaded via i2c
detection.

arch/powerpc/boot/dts/fsl/p2041rdb.dts:

    lm75b@48 {
    	compatible = "nxp,lm75a";
    	reg = <0x48>;
    };

In this case, the sensor is mistakenly considered as ADT75 variant.
The simplest way to handle this issue is to make the LM75 code
zero.

Fixes: e97a45f1b460 ("hwmon: (lm75) Add OF device ID table")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
---
 drivers/hwmon/lm75.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index e447febd121a..3aa7f9454f57 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -25,12 +25,12 @@
  */
 
 enum lm75_type {		/* keep sorted in alphabetical order */
+	lm75 = 0,		/* except of lm75 which is default fallback */
 	adt75,
 	ds1775,
 	ds75,
 	ds7505,
 	g751,
-	lm75,
 	lm75a,
 	lm75b,
 	max6625,
-- 
2.26.2