From: Borislav Petkov <bp@suse.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: x86-ml <x86@kernel.org>, lkml <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] x86/urgent for v5.11
Date: Sun, 14 Feb 2021 11:34:14 +0100 [thread overview]
Message-ID: <20210214103414.GA29103@zn.tnic> (raw)
Hi Linus,
I kinda knew while typing "I hope this is the last batch of x86/urgent
updates" last week, Murphy was reading too and uttered "Hold my beer!".
So here's more fixes... Thanks Murphy.
Anyway, please pull three more x86/urgent fixes for 5.11 final. We
should be finally ready (famous last words). :-)
Thx.
---
The following changes since commit 92bf22614b21a2706f4993b278017e437f7785b3:
Linux 5.11-rc7 (2021-02-07 13:57:38 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git tags/x86_urgent_for_v5.11
for you to fetch changes up to 70245f86c109e0eafb92ea9653184c0e44b4b35c:
x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init() (2021-02-10 22:06:47 +0100)
----------------------------------------------------------------
- An SGX use after free fix.
- A fix for the fix to disable CET instrumentation generation for kernel code.
We forgot 32-bit, which we seem to do very often nowadays.
- A Xen PV fix to irqdomain init ordering.
----------------------------------------------------------------
Borislav Petkov (1):
x86/build: Disable CET instrumentation in the kernel for 32-bit too
Jarkko Sakkinen (1):
x86/sgx: Maintain encl->refcount for each encl->mm_list entry
Thomas Gleixner (1):
x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
arch/x86/Makefile | 6 +++---
arch/x86/kernel/cpu/sgx/driver.c | 3 +++
arch/x86/kernel/cpu/sgx/encl.c | 5 +++++
arch/x86/pci/init.c | 15 +++++++++++----
4 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 5857917f83ee..30920d70b48b 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -50,6 +50,9 @@ export BITS
KBUILD_CFLAGS += -mno-sse -mno-mmx -mno-sse2 -mno-3dnow
KBUILD_CFLAGS += $(call cc-option,-mno-avx,)
+# Intel CET isn't enabled in the kernel
+KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
+
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
@@ -120,9 +123,6 @@ else
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
-
- # Intel CET isn't enabled in the kernel
- KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
endif
ifdef CONFIG_X86_X32
diff --git a/arch/x86/kernel/cpu/sgx/driver.c b/arch/x86/kernel/cpu/sgx/driver.c
index f2eac41bb4ff..8ce6d8371cfb 100644
--- a/arch/x86/kernel/cpu/sgx/driver.c
+++ b/arch/x86/kernel/cpu/sgx/driver.c
@@ -72,6 +72,9 @@ static int sgx_release(struct inode *inode, struct file *file)
synchronize_srcu(&encl->srcu);
mmu_notifier_unregister(&encl_mm->mmu_notifier, encl_mm->mm);
kfree(encl_mm);
+
+ /* 'encl_mm' is gone, put encl_mm->encl reference: */
+ kref_put(&encl->refcount, sgx_encl_release);
}
kref_put(&encl->refcount, sgx_encl_release);
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
index ee50a5010277..f65564a94b9b 100644
--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -481,6 +481,9 @@ static void sgx_mmu_notifier_free(struct mmu_notifier *mn)
{
struct sgx_encl_mm *encl_mm = container_of(mn, struct sgx_encl_mm, mmu_notifier);
+ /* 'encl_mm' is going away, put encl_mm->encl reference: */
+ kref_put(&encl_mm->encl->refcount, sgx_encl_release);
+
kfree(encl_mm);
}
@@ -534,6 +537,8 @@ int sgx_encl_mm_add(struct sgx_encl *encl, struct mm_struct *mm)
if (!encl_mm)
return -ENOMEM;
+ /* Grab a refcount for the encl_mm->encl reference: */
+ kref_get(&encl->refcount);
encl_mm->encl = encl;
encl_mm->mm = mm;
encl_mm->mmu_notifier.ops = &sgx_mmu_notifier_ops;
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 00bfa1ebad6c..0bb3b8b44e4e 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -9,16 +9,23 @@
in the right sequence from here. */
static __init int pci_arch_init(void)
{
- int type;
-
- x86_create_pci_msi_domain();
+ int type, pcbios = 1;
type = pci_direct_probe();
if (!(pci_probe & PCI_PROBE_NOEARLY))
pci_mmcfg_early_init();
- if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
+ if (x86_init.pci.arch_init)
+ pcbios = x86_init.pci.arch_init();
+
+ /*
+ * Must happen after x86_init.pci.arch_init(). Xen sets up the
+ * x86_init.irqs.create_pci_msi_domain there.
+ */
+ x86_create_pci_msi_domain();
+
+ if (!pcbios)
return 0;
pci_pcbios_init();
--
Regards/Gruss,
Boris.
SUSE Software Solutions Germany GmbH, GF: Felix Imendörffer, HRB 36809, AG Nürnberg
next reply other threads:[~2021-02-14 10:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-14 10:34 Borislav Petkov [this message]
2021-02-14 20:58 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210214103414.GA29103@zn.tnic \
--to=bp@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®