From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v1 1/1] mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
Date: Wed, 3 Mar 2021 18:49:44 +0200 [thread overview]
Message-ID: <20210303164944.41962-1-andriy.shevchenko@linux.intel.com> (raw)
The IRQ support for SCH GPIO is not specific to the Intel Quark SoC.
Moreover the IRQ routing is quite interesting there, so while it's
needs a special support, the driver haven't it anyway yet.
Due to above remove basically redundant code of IRQ support.
This reverts commit ec689a8a8155ce8b966bd5d7737a3916f5e48be3.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mfd/lpc_sch.c | 32 ++++++--------------------------
1 file changed, 6 insertions(+), 26 deletions(-)
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index f27eb8dabc1c..428a526cbe86 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -26,9 +26,6 @@
#define GPIO_IO_SIZE 64
#define GPIO_IO_SIZE_CENTERTON 128
-/* Intel Quark X1000 GPIO IRQ Number */
-#define GPIO_IRQ_QUARK_X1000 9
-
#define WDTBASE 0x84
#define WDT_IO_SIZE 64
@@ -43,30 +40,25 @@ struct lpc_sch_info {
unsigned int io_size_smbus;
unsigned int io_size_gpio;
unsigned int io_size_wdt;
- int irq_gpio;
};
static struct lpc_sch_info sch_chipset_info[] = {
[LPC_SCH] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_ITC] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE,
.io_size_wdt = WDT_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_CENTERTON] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
.io_size_wdt = WDT_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_QUARK_X1000] = {
.io_size_gpio = GPIO_IO_SIZE,
- .irq_gpio = GPIO_IRQ_QUARK_X1000,
.io_size_wdt = WDT_IO_SIZE,
},
};
@@ -113,13 +105,13 @@ static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
}
static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
- const char *name, int size, int irq,
- int id, struct mfd_cell *cell)
+ const char *name, int size, int id,
+ struct mfd_cell *cell)
{
struct resource *res;
int ret;
- res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL);
+ res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL);
if (!res)
return -ENOMEM;
@@ -135,18 +127,6 @@ static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
cell->ignore_resource_conflicts = true;
cell->id = id;
- /* Check if we need to add an IRQ resource */
- if (irq < 0)
- return 0;
-
- res++;
-
- res->start = irq;
- res->end = irq;
- res->flags = IORESOURCE_IRQ;
-
- cell->num_resources++;
-
return 0;
}
@@ -158,7 +138,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
int ret;
ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
- info->io_size_smbus, -1,
+ info->io_size_smbus,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
@@ -166,7 +146,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
cells++;
ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
- info->io_size_gpio, info->irq_gpio,
+ info->io_size_gpio,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
@@ -174,7 +154,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
cells++;
ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
- info->io_size_wdt, -1,
+ info->io_size_wdt,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
--
2.30.1
next reply other threads:[~2021-03-03 19:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 16:49 Andy Shevchenko [this message]
2021-03-23 11:57 ` Andy Shevchenko
2021-04-13 16:07 ` Andy Shevchenko
2021-04-14 8:13 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210303164944.41962-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome