From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Banajit Goswami <bgoswami@codeaurora.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
alsa-devel@alsa-project.org (moderated list:QCOM AUDIO (ASoC)
DRIVERS), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ASoC: codecs: lpass-wsa-macro: fix RX MIX input controls
Date: Thu, 4 Mar 2021 19:50:48 -0500 [thread overview]
Message-ID: <20210305005049.24726-1-jonathan@marek.ca> (raw)
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these
controls are incorrectly toggling the first bit of the register, which
is part of the FS_RATE field.
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX"
control, which is to use SND_SOC_NOPM as the register and use an enum in
the shift field instead.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
sound/soc/codecs/lpass-wsa-macro.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c
index f399f4dff5511..bd2561f9fb9fa 100644
--- a/sound/soc/codecs/lpass-wsa-macro.c
+++ b/sound/soc/codecs/lpass-wsa-macro.c
@@ -1211,14 +1211,16 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- u16 gain_reg;
+ u16 path_reg, gain_reg;
int val;
- switch (w->reg) {
- case CDC_WSA_RX0_RX_PATH_MIX_CTL:
+ switch (w->shift) {
+ case WSA_MACRO_RX_MIX0:
+ path_reg = CDC_WSA_RX0_RX_PATH_MIX_CTL;
gain_reg = CDC_WSA_RX0_RX_VOL_MIX_CTL;
break;
- case CDC_WSA_RX1_RX_PATH_MIX_CTL:
+ case WSA_MACRO_RX_MIX1:
+ path_reg = CDC_WSA_RX1_RX_PATH_MIX_CTL;
gain_reg = CDC_WSA_RX1_RX_VOL_MIX_CTL;
break;
default:
@@ -1231,7 +1233,7 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w,
snd_soc_component_write(component, gain_reg, val);
break;
case SND_SOC_DAPM_POST_PMD:
- snd_soc_component_update_bits(component, w->reg,
+ snd_soc_component_update_bits(component, path_reg,
CDC_WSA_RX_PATH_MIX_CLK_EN_MASK,
CDC_WSA_RX_PATH_MIX_CLK_DISABLE);
break;
@@ -2068,14 +2070,14 @@ static const struct snd_soc_dapm_widget wsa_macro_dapm_widgets[] = {
SND_SOC_DAPM_MUX("WSA_RX0 INP0", SND_SOC_NOPM, 0, 0, &rx0_prim_inp0_mux),
SND_SOC_DAPM_MUX("WSA_RX0 INP1", SND_SOC_NOPM, 0, 0, &rx0_prim_inp1_mux),
SND_SOC_DAPM_MUX("WSA_RX0 INP2", SND_SOC_NOPM, 0, 0, &rx0_prim_inp2_mux),
- SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", CDC_WSA_RX0_RX_PATH_MIX_CTL,
- 0, 0, &rx0_mix_mux, wsa_macro_enable_mix_path,
+ SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX0,
+ 0, &rx0_mix_mux, wsa_macro_enable_mix_path,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MUX("WSA_RX1 INP0", SND_SOC_NOPM, 0, 0, &rx1_prim_inp0_mux),
SND_SOC_DAPM_MUX("WSA_RX1 INP1", SND_SOC_NOPM, 0, 0, &rx1_prim_inp1_mux),
SND_SOC_DAPM_MUX("WSA_RX1 INP2", SND_SOC_NOPM, 0, 0, &rx1_prim_inp2_mux),
- SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", CDC_WSA_RX1_RX_PATH_MIX_CTL,
- 0, 0, &rx1_mix_mux, wsa_macro_enable_mix_path,
+ SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX1,
+ 0, &rx1_mix_mux, wsa_macro_enable_mix_path,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER_E("WSA_RX INT0 MIX", SND_SOC_NOPM, 0, 0, NULL, 0,
--
2.26.1
next reply other threads:[~2021-03-05 0:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 0:50 Jonathan Marek [this message]
2021-03-05 9:18 ` Srinivas Kandagatla
2021-03-08 16:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210305005049.24726-1-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®