[PATCH] iio: temperature: tmp007: use device-managed functions in probe

[Alexandru Ardelean <aardelean@deviqon.com>]

This change converts the driver to use device-managed functions in the
probe function. The power-down call is handled now via a
devm_add_action_or_reset() hook, and then devm_iio_device_register() can be
used to register the IIO device.

The final aim here would be for IIO to export only the device-managed
functions of it's API. That's a long way to go and this a small step in
that direction.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/temperature/tmp007.c | 36 +++++++++++++-------------------
 1 file changed, 15 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c
index ad2b35c65548..b422371a4674 100644
--- a/drivers/iio/temperature/tmp007.c
+++ b/drivers/iio/temperature/tmp007.c
@@ -439,6 +439,13 @@ static bool tmp007_identify(struct i2c_client *client)
 	return (manf_id == TMP007_MANUFACTURER_MAGIC && dev_id == TMP007_DEVICE_MAGIC);
 }
 
+static void tmp007_powerdown_action_cb(void *priv)
+{
+	struct tmp007_data *data = priv;
+
+	tmp007_powerdown(data);
+}
+
 static int tmp007_probe(struct i2c_client *client,
 			const struct i2c_device_id *tmp007_id)
 {
@@ -489,6 +496,10 @@ static int tmp007_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	ret = devm_add_action_or_reset(&client->dev, tmp007_powerdown_action_cb, data);
+	if (ret)
+		return ret;
+
 	/*
 	 * Only the following flags can activate ALERT pin. Data conversion/validity flags
 	 * flags can still be polled for getting temperature data
@@ -502,7 +513,7 @@ static int tmp007_probe(struct i2c_client *client,
 
 	ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK);
 	if (ret < 0)
-		goto error_powerdown;
+		return ret;
 
 	data->status_mask = ret;
 	data->status_mask |= (TMP007_STATUS_OHF | TMP007_STATUS_OLF
@@ -510,7 +521,7 @@ static int tmp007_probe(struct i2c_client *client,
 
 	ret = i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK, data->status_mask);
 	if (ret < 0)
-		goto error_powerdown;
+		return ret;
 
 	if (client->irq) {
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
@@ -519,27 +530,11 @@ static int tmp007_probe(struct i2c_client *client,
 				tmp007_id->name, indio_dev);
 		if (ret) {
 			dev_err(&client->dev, "irq request error %d\n", -ret);
-			goto error_powerdown;
+			return ret;
 		}
 	}
 
-	return iio_device_register(indio_dev);
-
-error_powerdown:
-	tmp007_powerdown(data);
-
-	return ret;
-}
-
-static int tmp007_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct tmp007_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-	tmp007_powerdown(data);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -582,7 +577,6 @@ static struct i2c_driver tmp007_driver = {
 		.pm	= &tmp007_pm_ops,
 	},
 	.probe		= tmp007_probe,
-	.remove		= tmp007_remove,
 	.id_table	= tmp007_id,
 };
 module_i2c_driver(tmp007_driver);
-- 
2.29.2