mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Grant Likely <grant.likely@arm.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Jeremy Linton <jeremy.linton@arm.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Russell King - ARM Linux admin <linux@armlinux.org.uk>,
	Cristi Sovaiala <cristian.sovaiala@nxp.com>,
	Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>,
	Ioana Ciornei <ioana.ciornei@nxp.com>,
	Madalin Bucur <madalin.bucur@oss.nxp.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Marcin Wojtas <mw@semihalf.com>,
	Pieter Jansen Van Vuuren <pieter.jansenvv@bamboosystems.io>,
	Jon <jon@solid-run.com>, Saravana Kannan <saravanak@google.com>,
	Randy Dunlap <rdunlap@infradead.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>,
	Diana Madalina Craciun <diana.craciun@nxp.com>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"linux.cj" <linux.cj@gmail.com>, netdev <netdev@vger.kernel.org>,
	Laurentiu Tudor <laurentiu.tudor@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>
Subject: Re: [net-next PATCH v7 11/16] net: mdio: Add ACPI support code for mdio
Date: Mon, 15 Mar 2021 15:51:52 +0530	[thread overview]
Message-ID: <20210315102152.GA14002@lsv03152.swis.in-blr01.nxp.com> (raw)
In-Reply-To: <CAHp75VcDzMGgQDWeqR7hxnHXmfobR-CbwcmuMoE57ZMwvNQQ3Q@mail.gmail.com>

On Thu, Mar 11, 2021 at 02:14:37PM +0200, Andy Shevchenko wrote:
> On Thu, Mar 11, 2021 at 8:22 AM Calvin Johnson
> <calvin.johnson@oss.nxp.com> wrote:
> >
> > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> > each ACPI child node.
> >
> > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> > ---
> >
> > Changes in v7:
> > - Include headers directly used in acpi_mdio.c
> >
> > Changes in v6:
> > - use GENMASK() and ACPI_COMPANION_SET()
> > - some cleanup
> > - remove unwanted header inclusion
> >
> > Changes in v5:
> > - add missing MODULE_LICENSE()
> > - replace fwnode_get_id() with OF and ACPI function calls
> >
> > Changes in v4: None
> > Changes in v3: None
> > Changes in v2: None
> >
> >  MAINTAINERS                  |  1 +
> >  drivers/net/mdio/Kconfig     |  7 +++++
> >  drivers/net/mdio/Makefile    |  1 +
> >  drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++
> >  include/linux/acpi_mdio.h    | 25 ++++++++++++++++
> >  5 files changed, 90 insertions(+)
> >  create mode 100644 drivers/net/mdio/acpi_mdio.c
> >  create mode 100644 include/linux/acpi_mdio.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 146de41d2656..051377b7fa94 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -6680,6 +6680,7 @@ F:        Documentation/devicetree/bindings/net/mdio*
> >  F:     Documentation/devicetree/bindings/net/qca,ar803x.yaml
> >  F:     Documentation/networking/phy.rst
> >  F:     drivers/net/mdio/
> > +F:     drivers/net/mdio/acpi_mdio.c
> >  F:     drivers/net/mdio/fwnode_mdio.c
> >  F:     drivers/net/mdio/of_mdio.c
> >  F:     drivers/net/pcs/
> > diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
> > index 2d5bf5ccffb5..fc8c787b448f 100644
> > --- a/drivers/net/mdio/Kconfig
> > +++ b/drivers/net/mdio/Kconfig
> > @@ -36,6 +36,13 @@ config OF_MDIO
> >         help
> >           OpenFirmware MDIO bus (Ethernet PHY) accessors
> >
> > +config ACPI_MDIO
> > +       def_tristate PHYLIB
> 
> > +       depends on ACPI
> > +       depends on PHYLIB
> 
> Same issue, they are no-ops.
> 
> I guess you have to surround OF and ACPI and FWNODE variants by
> 
> if PHYLIB
> ...
> endif
> 
> This will be an equivalent to depends on PHYLIB
> 
> and put this into Makefile
> 
> ifneq ($(CONFIG_ACPI),)
> obj-$(CONFIG_PHYLIB) += acpi_mdio.o
> endif
> 
> This will give you the rest, i.e. default PHYLIB + depends on ACPI
> 
> Similar for OF
> 

I checked the effect of y/n/m choice of PHYLIB on FWNODE_MDIO.
As expected with def_tristate, whenever PHYLIB changes to y/n/m corresponding
change is reflected on FWNODE_MDIO, also considering the state of other
depending CONFIGS like OF and ACPI.

Symbol: FWNODE_MDIO [=n]
│
  │ Type  : tristate
│
  │ Defined at drivers/net/mdio/Kconfig:22
│
  │   Depends on: NETDEVICES [=y] && MDIO_DEVICE [=y] && ACPI [=y] && OF [=y] &&
PHYLIB [=n]                                                          │
  │ Selects: FIXED_PHY [=n]

Effect is similar for ACPI_MDIO and OF_MDIO.

So instead of above proposed method, I think what you proposed in your earlier
email, i.e, "depends on (ACPI || OF) || COMPILE_TEST" seems to be better for
FWNODE_MDIO.

Shall we go ahead with this?

Regards
Calvin

> > +       help
> > +         ACPI MDIO bus (Ethernet PHY) accessors
> > +
> >  if MDIO_BUS
> >
> >  config MDIO_DEVRES
> > diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
> > index ea5390e2ef84..e8b739a3df1c 100644
> > --- a/drivers/net/mdio/Makefile
> > +++ b/drivers/net/mdio/Makefile
> > @@ -1,6 +1,7 @@
> >  # SPDX-License-Identifier: GPL-2.0
> >  # Makefile for Linux MDIO bus drivers
> >
> > +obj-$(CONFIG_ACPI_MDIO)                += acpi_mdio.o
> >  obj-$(CONFIG_FWNODE_MDIO)      += fwnode_mdio.o
> >  obj-$(CONFIG_OF_MDIO)          += of_mdio.o
> >
> > diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
> > new file mode 100644
> > index 000000000000..60a86e3fc246
> > --- /dev/null
> > +++ b/drivers/net/mdio/acpi_mdio.c
> > @@ -0,0 +1,56 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * ACPI helpers for the MDIO (Ethernet PHY) API
> > + *
> > + * This file provides helper functions for extracting PHY device information
> > + * out of the ACPI ASL and using it to populate an mii_bus.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/acpi_mdio.h>
> > +#include <linux/bits.h>
> > +#include <linux/dev_printk.h>
> > +#include <linux/fwnode_mdio.h>
> > +#include <linux/module.h>
> > +#include <linux/types.h>
> > +
> > +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
> > +MODULE_LICENSE("GPL");
> > +
> > +/**
> > + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
> > + * @mdio: pointer to mii_bus structure
> > + * @fwnode: pointer to fwnode of MDIO bus.
> > + *
> > + * This function registers the mii_bus structure and registers a phy_device
> > + * for each child node of @fwnode.
> > + */
> > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> > +{
> > +       struct fwnode_handle *child;
> > +       u32 addr;
> > +       int ret;
> > +
> > +       /* Mask out all PHYs from auto probing. */
> > +       mdio->phy_mask = GENMASK(31, 0);
> > +       ret = mdiobus_register(mdio);
> > +       if (ret)
> > +               return ret;
> > +
> > +       ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
> > +
> > +       /* Loop over the child nodes and register a phy_device for each PHY */
> > +       fwnode_for_each_child_node(fwnode, child) {
> > +               ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
> > +               if (ret || addr >= PHY_MAX_ADDR)
> > +                       continue;
> > +
> > +               ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> > +               if (ret == -ENODEV)
> > +                       dev_err(&mdio->dev,
> > +                               "MDIO device at address %d is missing.\n",
> > +                               addr);
> > +       }
> > +       return 0;
> > +}
> > +EXPORT_SYMBOL(acpi_mdiobus_register);
> > diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
> > new file mode 100644
> > index 000000000000..748d261fe2f9
> > --- /dev/null
> > +++ b/include/linux/acpi_mdio.h
> > @@ -0,0 +1,25 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * ACPI helper for the MDIO (Ethernet PHY) API
> > + */
> > +
> > +#ifndef __LINUX_ACPI_MDIO_H
> > +#define __LINUX_ACPI_MDIO_H
> > +
> > +#include <linux/phy.h>
> > +
> > +#if IS_ENABLED(CONFIG_ACPI_MDIO)
> > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
> > +#else /* CONFIG_ACPI_MDIO */
> > +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> > +{
> > +       /*
> > +        * Fall back to mdiobus_register() function to register a bus.
> > +        * This way, we don't have to keep compat bits around in drivers.
> > +        */
> > +
> > +       return mdiobus_register(mdio);
> > +}
> > +#endif
> > +
> > +#endif /* __LINUX_ACPI_MDIO_H */
> > --
> > 2.17.1
> >
> 
> 
> -- 
> With Best Regards,
> Andy Shevchenko

  reply	other threads:[~2021-03-15 10:23 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-11  6:19 [net-next PATCH v7 00/16] ACPI support for dpaa2 driver Calvin Johnson
2021-03-11  6:19 ` [net-next PATCH v7 01/16] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
2021-03-11  6:19 ` [net-next PATCH v7 02/16] net: phy: Introduce fwnode_mdio_find_device() Calvin Johnson
2021-03-11  6:50   ` Saravana Kannan
2021-03-11 16:58     ` Calvin Johnson
2021-03-11  6:19 ` [net-next PATCH v7 03/16] net: phy: Introduce phy related fwnode functions Calvin Johnson
2021-03-11  6:19 ` [net-next PATCH v7 04/16] of: mdio: Refactor of_phy_find_device() Calvin Johnson
2021-03-16 19:17   ` Daniel Thompson
2021-03-17  8:45     ` Calvin Johnson
2021-03-19 11:21       ` Daniel Thompson
2021-03-23  5:27         ` Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 05/16] net: phy: Introduce fwnode_get_phy_id() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 06/16] of: mdio: Refactor of_get_phy_id() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 07/16] net: mii_timestamper: check NULL in unregister_mii_timestamper() Calvin Johnson
2021-03-11 12:04   ` Andy Shevchenko
2021-03-11 17:03     ` Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 08/16] net: mdiobus: Introduce fwnode_mdiobus_register_phy() Calvin Johnson
2021-03-11 12:09   ` Andy Shevchenko
2021-03-11 18:00     ` Calvin Johnson
2021-03-11 18:14       ` Andy Shevchenko
2021-03-11  6:20 ` [net-next PATCH v7 09/16] of: mdio: Refactor of_mdiobus_register_phy() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 10/16] ACPI: utils: Introduce acpi_get_local_address() Calvin Johnson
2021-03-11 12:10   ` Andy Shevchenko
2021-03-11  6:20 ` [net-next PATCH v7 11/16] net: mdio: Add ACPI support code for mdio Calvin Johnson
2021-03-11 12:14   ` Andy Shevchenko
2021-03-15 10:21     ` Calvin Johnson [this message]
2021-03-11  6:20 ` [net-next PATCH v7 12/16] net: mdiobus: Introduce fwnode_mdiobus_register() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 13/16] net/fsl: Use fwnode_mdiobus_register() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 14/16] net: phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 15/16] net: phylink: Refactor phylink_of_phy_connect() Calvin Johnson
2021-03-11  6:20 ` [net-next PATCH v7 16/16] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Calvin Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210315102152.GA14002@lsv03152.swis.in-blr01.nxp.com \
    --to=calvin.johnson@oss.nxp.com \
    --cc=andrew@lunn.ch \
    --cc=andy.shevchenko@gmail.com \
    --cc=cristian.sovaiala@nxp.com \
    --cc=davem@davemloft.net \
    --cc=diana.craciun@nxp.com \
    --cc=f.fainelli@gmail.com \
    --cc=florinlaurentiu.chiculita@nxp.com \
    --cc=grant.likely@arm.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=hkallweit1@gmail.com \
    --cc=ioana.ciornei@nxp.com \
    --cc=jeremy.linton@arm.com \
    --cc=jon@solid-run.com \
    --cc=kuba@kernel.org \
    --cc=laurentiu.tudor@nxp.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux.cj@gmail.com \
    --cc=linux@armlinux.org.uk \
    --cc=madalin.bucur@oss.nxp.com \
    --cc=mw@semihalf.com \
    --cc=netdev@vger.kernel.org \
    --cc=pieter.jansenvv@bamboosystems.io \
    --cc=rafael@kernel.org \
    --cc=rdunlap@infradead.org \
    --cc=saravanak@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®