mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jim Cromie <jim.cromie@gmail.com>
To: jbaron@akamai.com, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org
Cc: Jim Cromie <jim.cromie@gmail.com>
Subject: [RFC PATCH v3 16/18] dyndbg: prevent build bugs via -DNO_DYNAMIC_DEBUG_TABLE
Date: Mon, 15 Mar 2021 23:07:59 -0600	[thread overview]
Message-ID: <20210316050801.2446401-17-jim.cromie@gmail.com> (raw)
In-Reply-To: <20210316050801.2446401-1-jim.cromie@gmail.com>

The next patch adds DEFINE_DYNAMIC_DEBUG_TABLE(), which breaks some
subtrees with special compile constraints (efi etc).

Avoid this by adding a define to suppress the *remote declaration*
done by DEFINE_DYNAMIC_DEBUG_TABLE(), automatically, on behalf of all
possible users of pr_debug.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
 arch/x86/boot/compressed/Makefile     | 1 +
 arch/x86/entry/vdso/Makefile          | 3 +++
 arch/x86/purgatory/Makefile           | 1 +
 drivers/firmware/efi/libstub/Makefile | 3 ++-
 4 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e0bc3988c3fa..ada4eb960d95 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -31,6 +31,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
 KBUILD_CFLAGS := -m$(BITS) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIE
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
+KBUILD_CFLAGS += -DNO_DYNAMIC_DEBUG_TABLE
 cflags-$(CONFIG_X86_32) := -march=i386
 cflags-$(CONFIG_X86_64) := -mcmodel=small -mno-red-zone
 KBUILD_CFLAGS += $(cflags-y)
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 05c4abc2fdfd..619878f2c427 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -29,6 +29,9 @@ vobjs32-y := vdso32/note.o vdso32/system_call.o vdso32/sigreturn.o
 vobjs32-y += vdso32/vclock_gettime.o
 vobjs-$(CONFIG_X86_SGX)	+= vsgx.o
 
+# avoid a x86_64_RELATIVE error
+KBUILD_CFLAGS += -DNO_DYNAMIC_DEBUG_TABLE
+
 # files to link into kernel
 obj-y				+= vma.o extable.o
 KASAN_SANITIZE_vma.o		:= y
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 95ea17a9d20c..95ba7b18410f 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -35,6 +35,7 @@ PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
 PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss -g0
 PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
 PURGATORY_CFLAGS += -fno-stack-protector
+PURGATORY_CFLAGS += -DNO_DYNAMIC_DEBUG_TABLE
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That
 # in turn leaves some undefined symbols like __fentry__ in purgatory and not
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index c23466e05e60..def8febefbd3 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -13,7 +13,8 @@ cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ \
 				   -Wno-pointer-sign \
 				   $(call cc-disable-warning, address-of-packed-member) \
 				   $(call cc-disable-warning, gnu) \
-				   -fno-asynchronous-unwind-tables
+				   -fno-asynchronous-unwind-tables \
+				   -DNO_DYNAMIC_DEBUG_TABLE
 
 # arm64 uses the full KBUILD_CFLAGS so it's necessary to explicitly
 # disable the stackleak plugin
-- 
2.29.2


  parent reply	other threads:[~2021-03-16  5:09 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-16  5:07 [RFC PATCH v3 00/18] dynamic debug diet plan Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 01/18] dyndbg: split struct _ddebug, move display fields to new _ddebug_site Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 02/18] dyndbg: __init iterate over __dyndbg & __dyndbg_site in parallel Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 03/18] dyndbg: refactor part of ddebug_change to ddebug_match_site Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 04/18] dyndbg: accept null site in ddebug_match_site Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 05/18] dyndbg: hoist ->site out of ddebug_match_site Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 06/18] dyndbg: accept null site in ddebug_change Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 07/18] dyndbg: accept null site in dynamic_emit_prefix Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 08/18] dyndbg: accept null site in ddebug_proc_show Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 09/18] dyndbg: optimize ddebug_emit_prefix Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 10/18] dyndbg: avoid calling dyndbg_emit_prefix when it has no work Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 11/18] dyndbg: refactor ddebug_alter_site out of ddebug_change Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 12/18] dyndbg: allow deleting site info via control interface Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 13/18] dyndbg+module: expose ddebug_sites to modules Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 14/18] dyndbg: add ddebug_site(_get|_put) abstraction Jim Cromie
2021-03-16  5:07 ` [RFC PATCH v3 15/18] dyndbg: add _index to struct _ddebug Jim Cromie
2021-03-16  5:07 ` Jim Cromie [this message]
2021-03-16  5:08 ` [RFC PATCH v3 17/18] dyndbg: RFC - DECLARE/DEFINE_DYNAMIC_DEBUG_TABLE Jim Cromie
2021-03-16  5:08 ` [RFC PATCH v3 18/18] dyndbg: shuffle ddebug_table fields Jim Cromie
2021-03-19  4:12 ` [RFC PATCH v3 00/18] dynamic debug diet plan Andi Kleen
2021-05-02  2:16   ` jim.cromie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210316050801.2446401-17-jim.cromie@gmail.com \
    --to=jim.cromie@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jbaron@akamai.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®