From: Hariprasad Kelam <hkelam@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kuba@kernel.org>, <davem@davemloft.net>, <sgoutham@marvell.com>,
<lcherian@marvell.com>, <gakula@marvell.com>,
<jerinj@marvell.com>, <sbhatta@marvell.com>, <hkelam@marvell.com>
Subject: [net-next PATCH 1/8] octeontx2-af: Add new CGX_CMDs to set and get PHY modulation type
Date: Sun, 21 Mar 2021 17:39:51 +0530 [thread overview]
Message-ID: <20210321120958.17531-2-hkelam@marvell.com> (raw)
In-Reply-To: <20210321120958.17531-1-hkelam@marvell.com>
From: Felix Manlunas <fmanlunas@marvell.com>
Implement commands to set and get PHY line-side modulation type
(NRZ or PAM4) from firmware.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
.../net/ethernet/marvell/octeontx2/af/cgx.c | 29 +++++++++++++++++
.../net/ethernet/marvell/octeontx2/af/cgx.h | 2 ++
.../ethernet/marvell/octeontx2/af/cgx_fw_if.h | 6 ++++
.../net/ethernet/marvell/octeontx2/af/mbox.h | 10 +++++-
.../ethernet/marvell/octeontx2/af/rvu_cgx.c | 31 +++++++++++++++++++
5 files changed, 77 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 68deae529bc..294e7d12f15 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -1072,6 +1072,35 @@ int cgx_get_phy_fec_stats(void *cgxd, int lmac_id)
return cgx_fwi_cmd_generic(req, &resp, cgx, lmac_id);
}
+int cgx_set_phy_mod_type(int mod, void *cgxd, int lmac_id)
+{
+ struct cgx *cgx = cgxd;
+ u64 req = 0, resp;
+
+ if (!cgx)
+ return -ENODEV;
+
+ req = FIELD_SET(CMDREG_ID, CGX_CMD_SET_PHY_MOD_TYPE, req);
+ req = FIELD_SET(CMDSETPHYMODTYPE, mod, req);
+ return cgx_fwi_cmd_generic(req, &resp, cgx, lmac_id);
+}
+
+int cgx_get_phy_mod_type(void *cgxd, int lmac_id)
+{
+ struct cgx *cgx = cgxd;
+ u64 req = 0, resp;
+ int err;
+
+ if (!cgx)
+ return -ENODEV;
+
+ req = FIELD_SET(CMDREG_ID, CGX_CMD_GET_PHY_MOD_TYPE, req);
+ err = cgx_fwi_cmd_generic(req, &resp, cgx, lmac_id);
+ if (!err)
+ return FIELD_GET(RESP_GETPHYMODTYPE, resp);
+ return err;
+}
+
static int cgx_fwi_link_change(struct cgx *cgx, int lmac_id, bool enable)
{
u64 req = 0;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
index 12521262164..10b5611a3b4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
@@ -165,4 +165,6 @@ u8 cgx_get_lmacid(void *cgxd, u8 lmac_index);
unsigned long cgx_get_lmac_bmap(void *cgxd);
void cgx_lmac_write(int cgx_id, int lmac_id, u64 offset, u64 val);
u64 cgx_lmac_read(int cgx_id, int lmac_id, u64 offset);
+int cgx_set_phy_mod_type(int mod, void *cgxd, int lmac_id);
+int cgx_get_phy_mod_type(void *cgxd, int lmac_id);
#endif /* CGX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
index aa4e42f78f1..6bde02c8e4b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
@@ -264,4 +264,10 @@ struct cgx_lnk_sts {
#define CMDMODECHANGE_PORT GENMASK_ULL(21, 14)
#define CMDMODECHANGE_FLAGS GENMASK_ULL(63, 22)
+/* command argument to be passed for cmd ID - CGX_CMD_SET_PHY_MOD_TYPE */
+#define CMDSETPHYMODTYPE GENMASK_ULL(8, 8)
+
+/* response to cmd ID - RESP_GETPHYMODTYPE */
+#define RESP_GETPHYMODTYPE GENMASK_ULL(9, 9)
+
#endif /* __CGX_FW_INTF_H__ */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 3af4d0ffcf7..66ab320b845 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -162,7 +162,10 @@ M(CGX_SET_LINK_MODE, 0x214, cgx_set_link_mode, cgx_set_link_mode_req,\
M(CGX_FEATURES_GET, 0x215, cgx_features_get, msg_req, \
cgx_features_info_msg) \
M(RPM_STATS, 0x216, rpm_stats, msg_req, rpm_stats_rsp) \
- /* NPA mbox IDs (range 0x400 - 0x5FF) */ \
+M(CGX_GET_PHY_MOD_TYPE, 0x217, cgx_get_phy_mod_type, msg_req, \
+ cgx_phy_mod_type) \
+M(CGX_SET_PHY_MOD_TYPE, 0x218, cgx_set_phy_mod_type, cgx_phy_mod_type, \
+ msg_rsp) \
/* NPA mbox IDs (range 0x400 - 0x5FF) */ \
M(NPA_LF_ALLOC, 0x400, npa_lf_alloc, \
npa_lf_alloc_req, npa_lf_alloc_rsp) \
@@ -510,6 +513,11 @@ struct rpm_stats_rsp {
u64 tx_stats[RPM_TX_STATS_COUNT];
};
+struct cgx_phy_mod_type {
+ struct mbox_msghdr hdr;
+ int mod;
+};
+
/* NPA mbox message formats */
/* NPA mailbox error codes
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index e668e482383..b78e48d18f6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -939,3 +939,34 @@ int rvu_mbox_handler_cgx_set_link_mode(struct rvu *rvu,
rsp->status = cgx_set_link_mode(cgxd, req->args, cgx_idx, lmac);
return 0;
}
+
+int rvu_mbox_handler_cgx_set_phy_mod_type(struct rvu *rvu,
+ struct cgx_phy_mod_type *req,
+ struct msg_rsp *rsp)
+{
+ int pf = rvu_get_pf(req->hdr.pcifunc);
+ u8 cgx_id, lmac_id;
+
+ if (!is_pf_cgxmapped(rvu, pf))
+ return -EPERM;
+
+ rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+ return cgx_set_phy_mod_type(req->mod, rvu_cgx_pdata(cgx_id, rvu),
+ lmac_id);
+}
+
+int rvu_mbox_handler_cgx_get_phy_mod_type(struct rvu *rvu, struct msg_req *req,
+ struct cgx_phy_mod_type *rsp)
+{
+ int pf = rvu_get_pf(req->hdr.pcifunc);
+ u8 cgx_id, lmac_id;
+
+ if (!is_pf_cgxmapped(rvu, pf))
+ return -EPERM;
+
+ rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+ rsp->mod = cgx_get_phy_mod_type(rvu_cgx_pdata(cgx_id, rvu), lmac_id);
+ if (rsp->mod < 0)
+ return rsp->mod;
+ return 0;
+}
--
2.17.1
next prev parent reply other threads:[~2021-03-21 12:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-21 12:09 [net-next PATCH 0/8] configuration support for switch headers & phy Hariprasad Kelam
2021-03-21 12:09 ` Hariprasad Kelam [this message]
2021-03-21 12:09 ` [net-next PATCH 2/8] octeontx2-pf: Add ethtool priv flag to control PAM4 on/off Hariprasad Kelam
2021-03-21 14:27 ` Andrew Lunn
2021-03-21 12:09 ` [net-next PATCH 3/8] octeontx2-af: Support for parsing pkts with switch headers Hariprasad Kelam
2021-03-21 12:09 ` [net-next PATCH 4/8] octeontx2-af: Do not allow VFs to overwrite PKIND config Hariprasad Kelam
2021-03-21 12:09 ` [net-next PATCH 5/8] octeontx2-af: Put CGX LMAC also in Higig2 mode Hariprasad Kelam
2021-03-21 12:09 ` [net-next PATCH 6/8] octeontx2-pf: Support to enable EDSA/Higig2 pkts parsing Hariprasad Kelam
2021-03-21 12:09 ` [net-next PATCH 7/8] octeontx2-af: Add flow steering support for FDSA tag Hariprasad Kelam
2021-03-21 12:09 ` [net-next PATCH 8/8] octeontx2-pf: Add ntuple filter support for FDSA Hariprasad Kelam
2021-03-21 14:15 ` [net-next PATCH 0/8] configuration support for switch headers & phy Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210321120958.17531-2-hkelam@marvell.com \
--to=hkelam@marvell.com \
--cc=davem@davemloft.net \
--cc=gakula@marvell.com \
--cc=jerinj@marvell.com \
--cc=kuba@kernel.org \
--cc=lcherian@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®