From: Gon Solo <gonsolo@gmail.com>
To: luciano.coelho@intel.com, kvalo@codeaurora.org,
davem@davemloft.net, kuba@kernel.org,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: iwlwifi: Microcode SW error
Date: Mon, 19 Apr 2021 11:08:00 +0200 [thread overview]
Message-ID: <20210419090800.GA52493@limone.gonsolo.de> (raw)
Hi all!
My internet was very slow and I saw the following in dmesg:
[Apr19 10:50] iwlwifi 0000:02:00.0: Queue 10 is active on fifo 1 and stuck for 10000 ms. SW [40, 93] HW [40, 93] FH TRB=0x0c010a037
[ +0,001244] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000.
The rest of the message is at the end of this message.
The kernel version is "Linux Limone 5.12.0-051200rc7-lowlatency" from https://kernel.ubuntu.com/~kernel-ppa/mainline.
The relevant output of lspci is:
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
I would be glad to provide additional details if somebody is interested
to fix this bug.
Regards,
Andreas
[[Apr19 10:50] iwlwifi 0000:02:00.0: Queue 10 is active on fifo 1 and stuck for 10000 ms. SW [40, 93] HW [40, 93] FH TRB=0x0c010a037
[ +0,001244] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000.
[ +0,000160] iwlwifi 0000:02:00.0: Start IWL Error Log Dump:
[ +0,000004] iwlwifi 0000:02:00.0: Status: 0x00000040, count: 6
[ +0,000005] iwlwifi 0000:02:00.0: Loaded firmware version: 17.3216344376.0 7260-17.ucode
[ +0,000005] iwlwifi 0000:02:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
[ +0,000005] iwlwifi 0000:02:00.0: 0x000002B0 | trm_hw_status0
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000000 | trm_hw_status1
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000B30 | branchlink2
[ +0,000004] iwlwifi 0000:02:00.0: 0x000164C0 | interruptlink1
[ +0,000003] iwlwifi 0000:02:00.0: 0x000164C0 | interruptlink2
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000000 | data1
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000080 | data2
[ +0,000003] iwlwifi 0000:02:00.0: 0x07030000 | data3
[ +0,000004] iwlwifi 0000:02:00.0: 0x5440EBF3 | beacon time
[ +0,000004] iwlwifi 0000:02:00.0: 0xF0BCB49D | tsf low
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000097 | tsf hi
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000000 | time gp1
[ +0,000004] iwlwifi 0000:02:00.0: 0x0845CB55 | time gp2
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000000 | uCode revision type
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000011 | uCode version major
[ +0,000003] iwlwifi 0000:02:00.0: 0xBFB58538 | uCode version minor
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000144 | hw version
[ +0,000003] iwlwifi 0000:02:00.0: 0x40489204 | board version
[ +0,000003] iwlwifi 0000:02:00.0: 0x0000001C | hcmd
[ +0,000004] iwlwifi 0000:02:00.0: 0x00022002 | isr0
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000000 | isr1
[ +0,000003] iwlwifi 0000:02:00.0: 0x0000000A | isr2
[ +0,000003] iwlwifi 0000:02:00.0: 0x0041D4C0 | isr3
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000000 | isr4
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000110 | last cmd Id
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000000 | wait_event
[ +0,000004] iwlwifi 0000:02:00.0: 0x00000080 | l2p_control
[ +0,000003] iwlwifi 0000:02:00.0: 0x00010020 | l2p_duration
[ +0,000004] iwlwifi 0000:02:00.0: 0x0000003F | l2p_mhvalid
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000080 | l2p_addr_match
[ +0,000003] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel
[ +0,000003] iwlwifi 0000:02:00.0: 0x15041745 | timestamp
[ +0,000004] iwlwifi 0000:02:00.0: 0x00348098 | flow_handler
[ +0,000066] iwlwifi 0000:02:00.0: Fseq Registers:
[ +0,000057] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_ERROR_CODE
[ +0,000057] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_TOP_INIT_VERSION
[ +0,000056] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVIO_INIT_VERSION
[ +0,000056] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_OTP_VERSION
[ +0,000071] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_TOP_CONTENT_VERSION
[ +0,000069] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_ALIVE_TOKEN
[ +0,000074] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVI_ID
[ +0,000074] iwlwifi 0000:02:00.0: 0x00000000 | FSEQ_CNVR_ID
[ +0,000061] iwlwifi 0000:02:00.0: 0x00000000 | CNVI_AUX_MISC_CHIP
[ +0,000061] iwlwifi 0000:02:00.0: 0x00000000 | CNVR_AUX_MISC_CHIP
[ +0,000059] iwlwifi 0000:02:00.0: 0x00000000 | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM
[ +0,000062] iwlwifi 0000:02:00.0: 0x00000000 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR
[ +0,000073] iwlwifi 0000:02:00.0: Collecting data: trigger 2 fired.
[ +0,000008] ieee80211 phy0: Hardware restart was requested
next reply other threads:[~2021-04-19 9:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-19 9:08 Gon Solo [this message]
2021-04-19 9:19 ` Johannes Berg
2021-04-19 9:54 ` Gonsolo
2021-04-19 9:55 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210419090800.GA52493@limone.gonsolo.de \
--to=gonsolo@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®