mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Guodong Xu <guodong.xu@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Axel Lin <axel.lin@ingics.com>
Subject: [PATCH] regulator: hi6421v600: Remove unneeded *pmic from struct hi6421_spmi_reg_info
Date: Fri, 30 Apr 2021 16:55:55 +0800	[thread overview]
Message-ID: <20210430085555.1127994-1-axel.lin@ingics.com> (raw)

Use rdev->regmap instead of pmic->regmap.
With this change, hi6421_spmi_regulator_disable can be removed and use
regulator_disable_regmap instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/hi6421v600-regulator.c | 22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index f6a14e9c3cbf..feddb0b5d4f1 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -18,7 +18,6 @@
 
 struct hi6421_spmi_reg_info {
 	struct regulator_desc	desc;
-	struct hi6421_spmi_pmic *pmic;
 	u8			eco_mode_mask;
 	u32			eco_uA;
 
@@ -98,13 +97,12 @@ static const unsigned int ldo34_voltages[] = {
 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	int ret;
 
 	/* cannot enable more than one regulator at one time */
 	mutex_lock(&sreg->enable_mutex);
 
-	ret = regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask,
 				 rdev->desc->enable_mask);
 
@@ -116,22 +114,12 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 	return ret;
 }
 
-static int hi6421_spmi_regulator_disable(struct regulator_dev *rdev)
-{
-	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
-
-	return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
-				  rdev->desc->enable_mask, 0);
-}
-
 static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	u32 reg_val;
 
-	regmap_read(pmic->regmap, rdev->desc->enable_reg, &reg_val);
+	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 
 	if (reg_val & sreg->eco_mode_mask)
 		return REGULATOR_MODE_IDLE;
@@ -143,7 +131,6 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 					  unsigned int mode)
 {
 	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
-	struct hi6421_spmi_pmic *pmic = sreg->pmic;
 	u32 val;
 
 	switch (mode) {
@@ -157,7 +144,7 @@ static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(pmic->regmap, rdev->desc->enable_reg,
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  sreg->eco_mode_mask, val);
 }
 
@@ -177,7 +164,7 @@ hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
 static const struct regulator_ops hi6421_spmi_ldo_rops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_spmi_regulator_enable,
-	.disable = hi6421_spmi_regulator_disable,
+	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_iterate,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -258,7 +245,6 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 	if (!sreg)
 		return -ENOMEM;
 
-	sreg->pmic = pmic;
 	mutex_init(&sreg->enable_mutex);
 
 	for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
-- 
2.25.1


             reply	other threads:[~2021-04-30  8:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30  8:55 Axel Lin [this message]
2021-05-11  8:25 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210430085555.1127994-1-axel.lin@ingics.com \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=guodong.xu@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®