mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>,
	dri-devel@lists.freedesktop.org,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>
Cc: Eric Anholt <eric@anholt.net>,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dom Cobley <dom@raspberrypi.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 11/12] drm/vc4: hdmi: Add a workqueue to set scrambling
Date: Fri,  7 May 2021 17:05:14 +0200	[thread overview]
Message-ID: <20210507150515.257424-12-maxime@cerno.tech> (raw)
In-Reply-To: <20210507150515.257424-1-maxime@cerno.tech>

It looks like some displays (like the LG 27UL850-W) don't enable the
scrambling when the HDMI driver enables it. However, if we set later the
scrambler enable bit, the display will work as expected.

Let's create delayed work queue to periodically look at the display
scrambling status, and if it's not set yet try to enable it again.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 25 +++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi.h |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index bda12fea0dce..4fa7ea419594 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -482,6 +482,8 @@ static bool vc4_hdmi_supports_scrambling(struct drm_encoder *encoder,
 	return true;
 }
 
+#define SCRAMBLING_POLLING_DELAY_MS	1000
+
 static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 {
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
@@ -498,6 +500,9 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) |
 		   VC5_HDMI_SCRAMBLER_CTL_ENABLE);
+
+	queue_delayed_work(system_wq, &vc4_hdmi->scrambling_work,
+			   msecs_to_jiffies(SCRAMBLING_POLLING_DELAY_MS));
 }
 
 static void vc4_hdmi_disable_scrambling(struct drm_encoder *encoder)
@@ -516,6 +521,9 @@ static void vc4_hdmi_disable_scrambling(struct drm_encoder *encoder)
 	if (crtc && !vc4_hdmi_mode_needs_scrambling(&crtc->mode))
 		return;
 
+	if (delayed_work_pending(&vc4_hdmi->scrambling_work))
+		cancel_delayed_work_sync(&vc4_hdmi->scrambling_work);
+
 	HDMI_WRITE(HDMI_SCRAMBLER_CTL, HDMI_READ(HDMI_SCRAMBLER_CTL) &
 		   ~VC5_HDMI_SCRAMBLER_CTL_ENABLE);
 
@@ -523,6 +531,22 @@ static void vc4_hdmi_disable_scrambling(struct drm_encoder *encoder)
 	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, false);
 }
 
+static void vc4_hdmi_scrambling_wq(struct work_struct *work)
+{
+	struct vc4_hdmi *vc4_hdmi = container_of(to_delayed_work(work),
+						 struct vc4_hdmi,
+						 scrambling_work);
+
+	if (drm_scdc_get_scrambling_status(vc4_hdmi->ddc))
+		return;
+
+	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
+	drm_scdc_set_scrambling(vc4_hdmi->ddc, true);
+
+	queue_delayed_work(system_wq, &vc4_hdmi->scrambling_work,
+			   msecs_to_jiffies(SCRAMBLING_POLLING_DELAY_MS));
+}
+
 static void vc4_hdmi_encoder_post_crtc_disable(struct drm_encoder *encoder,
 					       struct drm_atomic_state *state)
 {
@@ -2031,6 +2055,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4_hdmi = devm_kzalloc(dev, sizeof(*vc4_hdmi), GFP_KERNEL);
 	if (!vc4_hdmi)
 		return -ENOMEM;
+	INIT_DELAYED_WORK(&vc4_hdmi->scrambling_work, vc4_hdmi_scrambling_wq);
 
 	dev_set_drvdata(dev, vc4_hdmi);
 	encoder = &vc4_hdmi->encoder.base.base;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 3cd021136402..00efcf291c5a 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -126,6 +126,8 @@ struct vc4_hdmi {
 	struct vc4_hdmi_encoder encoder;
 	struct drm_connector connector;
 
+	struct delayed_work scrambling_work;
+
 	struct i2c_adapter *ddc;
 	void __iomem *hdmicore_regs;
 	void __iomem *hd_regs;
-- 
2.31.1


  parent reply	other threads:[~2021-05-07 15:06 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-07 15:05 [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 01/12] drm/vc4: txp: Properly set the possible_crtcs mask Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 02/12] drm/vc4: crtc: Skip the TXP Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 03/12] drm/vc4: crtc: Pass the drm_atomic_state to config_pv Maxime Ripard
2021-05-21 17:26   ` Dave Stevenson
2021-05-07 15:05 ` [PATCH v4 04/12] drm/vc4: crtc: Fix vc4_get_crtc_encoder logic Maxime Ripard
2021-05-21 17:54   ` Dave Stevenson
2021-05-07 15:05 ` [PATCH v4 05/12] drm/vc4: crtc: Lookup the encoder from the register at boot Maxime Ripard
2021-05-21 17:58   ` Dave Stevenson
2021-05-07 15:05 ` [PATCH v4 06/12] drm/vc4: hdmi: Prevent clock unbalance Maxime Ripard
2021-05-21 18:05   ` Dave Stevenson
2021-05-07 15:05 ` [PATCH v4 07/12] drm/vc4: hvs: Make the HVS bind first Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 08/12] drm/vc4: hdmi: Properly compute the BVB clock rate Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 09/12] drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies Maxime Ripard
2021-05-07 15:05 ` [PATCH v4 10/12] drm/vc4: hdmi: Enable the scrambler Maxime Ripard
2021-05-21 17:39   ` Dave Stevenson
2021-05-07 15:05 ` Maxime Ripard [this message]
2021-05-21 17:43   ` [PATCH v4 11/12] drm/vc4: hdmi: Add a workqueue to set scrambling Dave Stevenson
2021-05-07 15:05 ` [PATCH v4 12/12] drm/vc4: hdmi: Raise the maximum clock rate Maxime Ripard
2021-05-24 12:45 ` [PATCH v4 00/12] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210507150515.257424-12-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=nsaenz@kernel.org \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®