From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
gregkh@linuxfoundation.org, srinivas.kandagatla@linaro.org,
rander.wang@linux.intel.com, hui.wang@canonical.com,
pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com,
bard.liao@intel.com
Subject: [RESEND PATCH] soundwire: cadence_master: always set CMD_ACCEPT
Date: Tue, 11 May 2021 10:52:47 +0800 [thread overview]
Message-ID: <20210511025247.25339-1-yung-chuan.liao@linux.intel.com> (raw)
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
The Cadence IP can be configured in two different ways to deal with
CMD_IGNORED replies to broadcast commands. The CMD_ACCEPT bitfield
controls whether the command is discarded or if the IP proceeds with
the change (typically a bank switch or clock stop command).
The existing code seems to be inconsistent:
a) For some historical reason, we set this CMD_ACCEPT bitfield during
the initialization, but we don't during a resume from a clock-stoppped
state.
b) In addition, the loop used in the clock-stop sequence is quite
racy, it's possible that a device has lost sync but it's still tagged
as ATTACHED.
c) If somehow a Device loses sync and is unable to ack a broadcast
command, we do not have an error handling mechanism anyways. The IP
should go ahead and let the Device regain sync at a later time.
Make sure the CMD_ACCEPT bit is always set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/cadence_master.c | 21 ++-------------------
1 file changed, 2 insertions(+), 19 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 192dac10f0c2..25950422b085 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -1428,20 +1428,6 @@ int sdw_cdns_clock_stop(struct sdw_cdns *cdns, bool block_wake)
}
}
- /*
- * This CMD_ACCEPT should be used when there are no devices
- * attached on the link when entering clock stop mode. If this is
- * not set and there is a broadcast write then the command ignored
- * will be treated as a failure
- */
- if (!slave_present)
- cdns_updatel(cdns, CDNS_MCP_CONTROL,
- CDNS_MCP_CONTROL_CMD_ACCEPT,
- CDNS_MCP_CONTROL_CMD_ACCEPT);
- else
- cdns_updatel(cdns, CDNS_MCP_CONTROL,
- CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
-
/* commit changes */
ret = cdns_config_update(cdns);
if (ret < 0) {
@@ -1508,11 +1494,8 @@ int sdw_cdns_clock_restart(struct sdw_cdns *cdns, bool bus_reset)
cdns_updatel(cdns, CDNS_MCP_CONTROL,
CDNS_MCP_CONTROL_BLOCK_WAKEUP, 0);
- /*
- * clear CMD_ACCEPT so that the command ignored
- * will be treated as a failure during a broadcast write
- */
- cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT, 0);
+ cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT,
+ CDNS_MCP_CONTROL_CMD_ACCEPT);
if (!bus_reset) {
--
2.17.1
next reply other threads:[~2021-05-11 2:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 2:52 Bard Liao [this message]
2021-05-11 12:22 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511025247.25339-1-yung-chuan.liao@linux.intel.com \
--to=yung-chuan.liao@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=bard.liao@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hui.wang@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=rander.wang@linux.intel.com \
--cc=sanyog.r.kale@intel.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=vinod.koul@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®