From: Quan Nguyen <quan@os.amperecomputing.com>
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: openbmc@lists.ozlabs.org,
Open Source Submission <patches@amperecomputing.com>,
Phong Vo <phong@os.amperecomputing.com>,
"Thang Q . Nguyen" <thang@os.amperecomputing.com>
Subject: [PATCH 0/3] Add support PSU and OCP card on Mt. Jade BMC
Date: Mon, 17 May 2021 11:00:33 +0700 [thread overview]
Message-ID: <20210517040036.13667-1-quan@os.amperecomputing.com> (raw)
The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
hardware reference platform with Ampere's Altra Processor family.
This series adds support PSU and OCP card on the Ampere's Mt. Jade BMC
and switch to use the 64MB flash layout as the 32MB layout will soon be
exhausted.
Quan Nguyen (3):
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 57 +++++++++++++++++--
1 file changed, 53 insertions(+), 4 deletions(-)
--
2.28.0
next reply other threads:[~2021-05-17 4:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-17 4:00 Quan Nguyen [this message]
2021-05-17 4:00 ` [PATCH 1/3] ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI Quan Nguyen
2021-05-17 4:00 ` [PATCH 2/3] ARM: dts: aspeed: mtjade: Add PSU support Quan Nguyen
2021-05-17 4:00 ` [PATCH 3/3] ARM: dts: aspeed: mtjade: switch to 64MB flash layout Quan Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210517040036.13667-1-quan@os.amperecomputing.com \
--to=quan@os.amperecomputing.com \
--cc=andrew@aj.id.au \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=patches@amperecomputing.com \
--cc=phong@os.amperecomputing.com \
--cc=robh+dt@kernel.org \
--cc=thang@os.amperecomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®