[PATCH -next] ASoC: hisilicon: fix missing clk_disable_unprepare() on error in hi6210_i2s_startup()

[Yang Yingliang <yangyingliang@huawei.com>]

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling clk_set_rate() failed.

Fixes: 0bf750f4cbe1 ("ASoC: hisilicon: Add hi6210 i2s audio driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 sound/soc/hisilicon/hi6210-i2s.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/sound/soc/hisilicon/hi6210-i2s.c b/sound/soc/hisilicon/hi6210-i2s.c
index 907f5f1f7b44..ff05b9779e4b 100644
--- a/sound/soc/hisilicon/hi6210-i2s.c
+++ b/sound/soc/hisilicon/hi6210-i2s.c
@@ -102,18 +102,15 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,
 
 	for (n = 0; n < i2s->clocks; n++) {
 		ret = clk_prepare_enable(i2s->clk[n]);
-		if (ret) {
-			while (n--)
-				clk_disable_unprepare(i2s->clk[n]);
-			return ret;
-		}
+		if (ret)
+			goto err_unprepare_clk;
 	}
 
 	ret = clk_set_rate(i2s->clk[CLK_I2S_BASE], 49152000);
 	if (ret) {
 		dev_err(i2s->dev, "%s: setting 49.152MHz base rate failed %d\n",
 			__func__, ret);
-		return ret;
+		goto err_unprepare_clk;
 	}
 
 	/* enable clock before frequency division */
@@ -165,6 +162,11 @@ static int hi6210_i2s_startup(struct snd_pcm_substream *substream,
 	hi6210_write_reg(i2s, HII2S_SW_RST_N, val);
 
 	return 0;
+
+err_unprepare_clk:
+	while (n--)
+		clk_disable_unprepare(i2s->clk[n]);
+	return ret;
 }
 
 static void hi6210_i2s_shutdown(struct snd_pcm_substream *substream,
-- 
2.25.1