From: Vlastimil Babka <vbabka@suse.cz>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Christoph Lameter <cl@linux.com>,
David Rientjes <rientjes@google.com>,
Pekka Enberg <penberg@kernel.org>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Thomas Gleixner <tglx@linutronix.de>,
Mel Gorman <mgorman@techsingularity.net>,
Jesper Dangaard Brouer <brouer@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Jann Horn <jannh@google.com>, Vlastimil Babka <vbabka@suse.cz>
Subject: [RFC 16/26] mm, slub: move reset of c->page and freelist out of deactivate_slab()
Date: Tue, 25 May 2021 01:39:36 +0200 [thread overview]
Message-ID: <20210524233946.20352-17-vbabka@suse.cz> (raw)
In-Reply-To: <20210524233946.20352-1-vbabka@suse.cz>
deactivate_slab() removes the cpu slab by merging the cpu freelist with slab's
freelist and putting the slab on the proper node's list. It also sets the
respective kmem_cache_cpu pointers to NULL.
By extracting the kmem_cache_cpu operations from the function, we can make it
not dependent on disabled irqs.
Also if we return a single free pointer from ___slab_alloc, we no longer have
to load the slab page before deactivation or care if somebody preempted us and
loaded a different slab page to our kmem_cache_cpu in the process.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
mm/slub.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/mm/slub.c b/mm/slub.c
index bc7bee5d4bf2..cf855cd09802 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2163,10 +2163,13 @@ static void init_kmem_cache_cpus(struct kmem_cache *s)
}
/*
- * Remove the cpu slab
+ * Finishes removing the cpu slab. Merges cpu's freelist with page's freelist,
+ * unfreezes the slabs and puts it on the proper list.
+ * Assumes the slab has been already safely taken away from kmem_cache_cpu
+ * by the caller.
*/
static void deactivate_slab(struct kmem_cache *s, struct page *page,
- void *freelist, struct kmem_cache_cpu *c)
+ void *freelist)
{
enum slab_modes { M_NONE, M_PARTIAL, M_FULL, M_FREE };
struct kmem_cache_node *n = get_node(s, page_to_nid(page));
@@ -2295,9 +2298,6 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page,
discard_slab(s, page);
stat(s, FREE_SLAB);
}
-
- c->page = NULL;
- c->freelist = NULL;
}
/*
@@ -2429,10 +2429,16 @@ static void put_cpu_partial(struct kmem_cache *s, struct page *page, int drain)
static inline void flush_slab(struct kmem_cache *s, struct kmem_cache_cpu *c)
{
- stat(s, CPUSLAB_FLUSH);
- deactivate_slab(s, c->page, c->freelist, c);
+ void *freelist = c->freelist;
+ struct page *page = c->page;
+ c->page = NULL;
+ c->freelist = NULL;
c->tid = next_tid(c->tid);
+
+ deactivate_slab(s, page, freelist);
+
+ stat(s, CPUSLAB_FLUSH);
}
/*
@@ -2712,7 +2718,10 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
local_irq_restore(flags);
goto reread_page;
}
- deactivate_slab(s, page, c->freelist, c);
+ freelist = c->freelist;
+ c->page = NULL;
+ c->freelist = NULL;
+ deactivate_slab(s, page, freelist);
local_irq_restore(flags);
new_slab:
@@ -2792,11 +2801,7 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
return_single:
local_irq_save(flags);
- if (unlikely(c->page))
- flush_slab(s, c);
- c->page = page;
-
- deactivate_slab(s, page, get_freepointer(s, freelist), c);
+ deactivate_slab(s, page, get_freepointer(s, freelist));
local_irq_restore(flags);
return freelist;
}
--
2.31.1
next prev parent reply other threads:[~2021-05-24 23:42 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-24 23:39 [RFC 00/26] SLUB: use local_lock for kmem_cache_cpu protection and reduce disabling irqs Vlastimil Babka
2021-05-24 23:39 ` [RFC 01/26] mm, slub: allocate private object map for sysfs listings Vlastimil Babka
2021-05-25 8:06 ` Christoph Lameter
2021-05-25 10:13 ` Mel Gorman
2021-05-24 23:39 ` [RFC 02/26] mm, slub: allocate private object map for validate_slab_cache() Vlastimil Babka
2021-05-25 8:09 ` Christoph Lameter
2021-05-25 10:17 ` Mel Gorman
2021-05-25 10:36 ` Vlastimil Babka
2021-05-25 11:33 ` Mel Gorman
2021-06-08 10:37 ` Vlastimil Babka
2021-05-24 23:39 ` [RFC 03/26] mm, slub: don't disable irq for debug_check_no_locks_freed() Vlastimil Babka
2021-05-25 10:24 ` Mel Gorman
2021-05-24 23:39 ` [RFC 04/26] mm, slub: simplify kmem_cache_cpu and tid setup Vlastimil Babka
2021-05-25 11:47 ` Mel Gorman
2021-05-24 23:39 ` [RFC 05/26] mm, slub: extract get_partial() from new_slab_objects() Vlastimil Babka
2021-05-25 9:03 ` Christoph Lameter
2021-05-25 11:54 ` Mel Gorman
2021-05-24 23:39 ` [RFC 06/26] mm, slub: dissolve new_slab_objects() into ___slab_alloc() Vlastimil Babka
2021-05-25 9:06 ` Christoph Lameter
2021-05-25 11:59 ` Mel Gorman
2021-05-24 23:39 ` [RFC 07/26] mm, slub: return slab page from get_partial() and set c->page afterwards Vlastimil Babka
2021-05-25 9:12 ` Christoph Lameter
2021-06-08 10:48 ` Vlastimil Babka
2021-05-24 23:39 ` [RFC 08/26] mm, slub: restructure new page checks in ___slab_alloc() Vlastimil Babka
2021-05-25 12:09 ` Mel Gorman
2021-05-24 23:39 ` [RFC 09/26] mm, slub: move disabling/enabling irqs to ___slab_alloc() Vlastimil Babka
2021-05-25 12:35 ` Mel Gorman
2021-05-25 12:47 ` Vlastimil Babka
2021-05-25 15:10 ` Mel Gorman
2021-05-25 17:24 ` Vlastimil Babka
2021-05-24 23:39 ` [RFC 10/26] mm, slub: do initial checks in ___slab_alloc() with irqs enabled Vlastimil Babka
2021-05-25 13:04 ` Mel Gorman
2021-06-08 12:13 ` Vlastimil Babka
2021-05-24 23:39 ` [RFC 11/26] mm, slub: move disabling irqs closer to get_partial() in ___slab_alloc() Vlastimil Babka
2021-05-25 16:00 ` Jann Horn
2021-05-24 23:39 ` [RFC 12/26] mm, slub: restore irqs around calling new_slab() Vlastimil Babka
2021-05-24 23:39 ` [RFC 13/26] mm, slub: validate partial and newly allocated slabs before loading them Vlastimil Babka
2021-05-24 23:39 ` [RFC 14/26] mm, slub: check new pages with restored irqs Vlastimil Babka
2021-05-24 23:39 ` [RFC 15/26] mm, slub: stop disabling irqs around get_partial() Vlastimil Babka
2021-05-24 23:39 ` Vlastimil Babka [this message]
2021-05-24 23:39 ` [RFC 17/26] mm, slub: make locking in deactivate_slab() irq-safe Vlastimil Babka
2021-05-24 23:39 ` [RFC 18/26] mm, slub: call deactivate_slab() without disabling irqs Vlastimil Babka
2021-05-24 23:39 ` [RFC 19/26] mm, slub: move irq control into unfreeze_partials() Vlastimil Babka
2021-05-24 23:39 ` [RFC 20/26] mm, slub: discard slabs in unfreeze_partials() without irqs disabled Vlastimil Babka
2021-05-24 23:39 ` [RFC 21/26] mm, slub: detach whole partial list at once in unfreeze_partials() Vlastimil Babka
2021-05-24 23:39 ` [RFC 22/26] mm, slub: detach percpu partial list in unfreeze_partials() using this_cpu_cmpxchg() Vlastimil Babka
2021-05-24 23:39 ` [RFC 23/26] mm, slub: only disable irq with spin_lock in __unfreeze_partials() Vlastimil Babka
2021-05-24 23:39 ` [RFC 24/26] mm, slub: don't disable irqs in slub_cpu_dead() Vlastimil Babka
2021-05-24 23:39 ` [RFC 25/26] mm, slub: use migrate_disable() in put_cpu_partial() Vlastimil Babka
2021-05-25 15:33 ` Jann Horn
2021-06-09 8:41 ` Vlastimil Babka
2021-05-24 23:39 ` [RFC 26/26] mm, slub: convert kmem_cpu_slab protection to local_lock Vlastimil Babka
2021-05-25 16:11 ` Vlastimil Babka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210524233946.20352-17-vbabka@suse.cz \
--to=vbabka@suse.cz \
--cc=bigeasy@linutronix.de \
--cc=brouer@redhat.com \
--cc=cl@linux.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=jannh@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@techsingularity.net \
--cc=penberg@kernel.org \
--cc=peterz@infradead.org \
--cc=rientjes@google.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®