From: "Paul E. McKenney" <paulmck@kernel.org>
To: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
kernel test robot <oliver.sang@intel.com>,
stable@vger.kernel.org
Subject: Re: [PATCH] tick/nohz: Only check for RCU deferred wakeup on user/guest entry when needed
Date: Thu, 27 May 2021 08:48:23 -0700 [thread overview]
Message-ID: <20210527154823.GC4397@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <20210527113441.465489-1-frederic@kernel.org>
On Thu, May 27, 2021 at 01:34:41PM +0200, Frederic Weisbecker wrote:
> Checking for and processing RCU-nocb deferred wakeup upon user/guest
> entry is only relevant when nohz_full runs on the local CPU, otherwise
> the periodic tick should take care of it.
The above initially confused me into thinking that we were dealing
with non-local CPUs, and the patch itself straightened me out.
How about something like this?
Because the periodic tick is active during user/guest execution
on non-nohz_full CPUs, only nohz_full CPUs need to check for
RCU-nocb deferred wakeup on user/guest transitions.
> Make sure we don't needlessly pollute these fast-paths as a -3%
> performance regression on a will-it-scale.per_process_ops has been
> reported so far.
>
> Reported-by: kernel test robot <oliver.sang@intel.com>
> Fixes: 47b8ff194c1f (entry: Explicitly flush pending rcuog wakeup before last rescheduling point)
> Fixes: 4ae7dc97f726 (entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point)
> Cc: Ingo Molnar <mingo@kernel.org>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: stable@vger.kernel.org
> Cc: Paul E. McKenney <paulmck@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
> ---
> include/linux/entry-kvm.h | 3 ++-
> include/linux/tick.h | 7 +++++++
> kernel/entry/common.c | 5 +++--
> kernel/time/tick-sched.c | 1 +
> 4 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/entry-kvm.h b/include/linux/entry-kvm.h
> index 8b2b1d68b954..136b8d97d8c0 100644
> --- a/include/linux/entry-kvm.h
> +++ b/include/linux/entry-kvm.h
> @@ -3,6 +3,7 @@
> #define __LINUX_ENTRYKVM_H
>
> #include <linux/entry-common.h>
> +#include <linux/tick.h>
>
> /* Transfer to guest mode work */
> #ifdef CONFIG_KVM_XFER_TO_GUEST_WORK
> @@ -57,7 +58,7 @@ int xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu);
> static inline void xfer_to_guest_mode_prepare(void)
> {
> lockdep_assert_irqs_disabled();
> - rcu_nocb_flush_deferred_wakeup();
> + tick_nohz_user_enter_prepare();
> }
>
> /**
> diff --git a/include/linux/tick.h b/include/linux/tick.h
> index 7340613c7eff..1a0ff88fa107 100644
> --- a/include/linux/tick.h
> +++ b/include/linux/tick.h
> @@ -11,6 +11,7 @@
> #include <linux/context_tracking_state.h>
> #include <linux/cpumask.h>
> #include <linux/sched.h>
> +#include <linux/rcupdate.h>
>
> #ifdef CONFIG_GENERIC_CLOCKEVENTS
> extern void __init tick_init(void);
> @@ -300,4 +301,10 @@ static inline void tick_nohz_task_switch(void)
> __tick_nohz_task_switch();
> }
>
> +static inline void tick_nohz_user_enter_prepare(void)
> +{
> + if (tick_nohz_full_cpu(smp_processor_id()))
> + rcu_nocb_flush_deferred_wakeup();
> +}
> +
> #endif
> diff --git a/kernel/entry/common.c b/kernel/entry/common.c
> index a0b3b04fb596..bf16395b9e13 100644
> --- a/kernel/entry/common.c
> +++ b/kernel/entry/common.c
> @@ -5,6 +5,7 @@
> #include <linux/highmem.h>
> #include <linux/livepatch.h>
> #include <linux/audit.h>
> +#include <linux/tick.h>
>
> #include "common.h"
>
> @@ -186,7 +187,7 @@ static unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
> local_irq_disable_exit_to_user();
>
> /* Check if any of the above work has queued a deferred wakeup */
> - rcu_nocb_flush_deferred_wakeup();
> + tick_nohz_user_enter_prepare();
>
> ti_work = READ_ONCE(current_thread_info()->flags);
> }
> @@ -202,7 +203,7 @@ static void exit_to_user_mode_prepare(struct pt_regs *regs)
> lockdep_assert_irqs_disabled();
>
> /* Flush pending rcuog wakeup before the last need_resched() check */
> - rcu_nocb_flush_deferred_wakeup();
> + tick_nohz_user_enter_prepare();
>
> if (unlikely(ti_work & EXIT_TO_USER_MODE_WORK))
> ti_work = exit_to_user_mode_loop(regs, ti_work);
> diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
> index 828b091501ca..6784f27a3099 100644
> --- a/kernel/time/tick-sched.c
> +++ b/kernel/time/tick-sched.c
> @@ -230,6 +230,7 @@ static void tick_sched_handle(struct tick_sched *ts, struct pt_regs *regs)
>
> #ifdef CONFIG_NO_HZ_FULL
> cpumask_var_t tick_nohz_full_mask;
> +EXPORT_SYMBOL_GPL(tick_nohz_full_mask);
> bool tick_nohz_full_running;
> EXPORT_SYMBOL_GPL(tick_nohz_full_running);
> static atomic_t tick_dep_mask;
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-05-27 15:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-27 11:34 Frederic Weisbecker
2021-05-27 15:48 ` Paul E. McKenney [this message]
2021-05-31 10:40 ` [tip: sched/urgent] " tip-bot2 for Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210527154823.GC4397@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=frederic@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=oliver.sang@intel.com \
--cc=peterz@infradead.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®