Hi!

> >  drivers/leds/leds-as3645a.c:198: warning: expecting prototype for as3645a_set_config(). Prototype was for as3645a_set_current() instead
> > 
> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> > Cc: Pavel Machek <pavel@ucw.cz>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: linux-leds@vger.kernel.org
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> >  drivers/leds/leds-as3645a.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/leds/leds-as3645a.c b/drivers/leds/leds-as3645a.c
> > index e8922fa033796..c41937ff8fd33 100644
> > --- a/drivers/leds/leds-as3645a.c
> > +++ b/drivers/leds/leds-as3645a.c
> > @@ -185,7 +185,7 @@ static int as3645a_read(struct as3645a *flash, u8 addr)
> >   */
> >  
> >  /**
> > - * as3645a_set_config - Set flash configuration registers
> > + * as3645a_set_current - Set flash configuration registers
> >   * @flash: The flash
> >   *
> >   * Configure the hardware with flash, assist and indicator currents, as well as
> 
> Thanks for the patch.
> 
> The entire comment could be removed. It's wrong and doesn't really tell
> more than what you can read in the two functions below (the two are result
> of splitting one the documentation was written for).

I just took the patch, I'll happily take a follow up.

Best regards,
								Pavel
-- 
http://www.livejournal.com/~pavelmachek