[PATCH RFT 1/2] regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks

[Axel Lin <axel.lin@ingics.com>]

Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.

Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi ChiYuan,
I don't have this h/w to test.
Please help to review and test this patch.

Thanks,
Axel

 drivers/regulator/rtmv20-regulator.c | 42 ++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/rtmv20-regulator.c b/drivers/regulator/rtmv20-regulator.c
index 852fb2596ffd..5adc552dffd5 100644
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -103,9 +103,47 @@ static int rtmv20_lsw_disable(struct regulator_dev *rdev)
 	return 0;
 }
 
+static int rtmv20_lsw_set_current_limit(struct regulator_dev *rdev, int min_uA,
+					int max_uA)
+{
+	int sel;
+
+	if (min_uA > RTMV20_LSW_MAXUA || max_uA < RTMV20_LSW_MINUA)
+		return -EINVAL;
+
+	if (max_uA > RTMV20_LSW_MAXUA)
+		max_uA = RTMV20_LSW_MAXUA;
+
+	sel = (max_uA - RTMV20_LSW_MINUA) / RTMV20_LSW_STEPUA;
+
+	/* Ensure the selected setting is still in range */
+	if ((sel * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA) < min_uA)
+		return -EINVAL;
+
+	sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+				  rdev->desc->csel_mask, sel);
+}
+
+static int rtmv20_lsw_get_current_limit(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+	if (ret)
+		return ret;
+
+	val &= rdev->desc->csel_mask;
+	val >>= ffs(rdev->desc->csel_mask) - 1;
+
+	return val * RTMV20_LSW_STEPUA + RTMV20_LSW_MINUA;
+}
+
 static const struct regulator_ops rtmv20_regulator_ops = {
-	.set_current_limit = regulator_set_current_limit_regmap,
-	.get_current_limit = regulator_get_current_limit_regmap,
+	.set_current_limit = rtmv20_lsw_set_current_limit,
+	.get_current_limit = rtmv20_lsw_get_current_limit,
 	.enable = rtmv20_lsw_enable,
 	.disable = rtmv20_lsw_disable,
 	.is_enabled = regulator_is_enabled_regmap,
-- 
2.25.1