From: Oleksij Rempel <o.rempel@pengutronix.de>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH net-next v1 5/7] net: usb: asix: add error handling for asix_mdio_* functions
Date: Fri, 4 Jun 2021 15:42:42 +0200 [thread overview]
Message-ID: <20210604134244.2467-6-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210604134244.2467-1-o.rempel@pengutronix.de>
This usb devices can be removed at any time, so we need to forward
correct error value if device was detached.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/usb/asix_common.c | 38 +++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 6b94c27576b7..7cce8f7d79b6 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -484,18 +484,23 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
return ret;
}
- asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, &res, 0);
- asix_set_hw_mii(dev, 0);
+ ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
+ &res, 0);
+ if (ret < 0)
+ goto out;
+
+ ret = asix_set_hw_mii(dev, 0);
+out:
mutex_unlock(&dev->phy_mutex);
netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
phy_id, loc, le16_to_cpu(res));
- return le16_to_cpu(res);
+ return ret < 0 ? ret : le16_to_cpu(res);
}
-void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
+ int val)
{
struct usbnet *dev = netdev_priv(netdev);
__le16 res = cpu_to_le16(val);
@@ -517,13 +522,24 @@ void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
if (ret == -ENODEV) {
mutex_unlock(&dev->phy_mutex);
- return;
+ return ret;
}
- asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
- (__u16)loc, 2, &res, 0);
- asix_set_hw_mii(dev, 0);
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
+ &res, 0);
+ if (ret < 0)
+ goto out;
+
+ ret = asix_set_hw_mii(dev, 0);
+out:
mutex_unlock(&dev->phy_mutex);
+
+ return ret < 0 ? ret : 0;
+}
+
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ __asix_mdio_write(netdev, phy_id, loc, val);
}
/* MDIO read and write wrappers for phylib */
@@ -535,8 +551,8 @@ int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
{
- asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
- return 0;
+ return __asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id,
+ regnum, val);
}
int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
--
2.29.2
next prev parent reply other threads:[~2021-06-04 13:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-04 13:42 [PATCH net-next v1 0/7] port asix ax88772 to the PHYlib Oleksij Rempel
2021-06-04 13:42 ` [PATCH net-next v1 1/7] net: usb: asix: ax88772_bind: use devm_kzalloc() instead of kzalloc() Oleksij Rempel
2021-06-04 23:05 ` Andrew Lunn
2021-06-04 13:42 ` [PATCH net-next v1 2/7] net: usb: asix: ax88772: add phylib support Oleksij Rempel
2021-06-04 23:18 ` Andrew Lunn
2021-06-04 13:42 ` [PATCH net-next v1 3/7] net: usb/phy: asix: add support for ax88772A/C PHYs Oleksij Rempel
2021-06-04 23:23 ` Andrew Lunn
2021-06-04 13:42 ` [PATCH net-next v1 4/7] net: usb: asix: ax88772: add generic selftest support Oleksij Rempel
2021-06-04 23:24 ` Andrew Lunn
2021-06-04 13:42 ` Oleksij Rempel [this message]
2021-06-04 23:31 ` [PATCH net-next v1 5/7] net: usb: asix: add error handling for asix_mdio_* functions Andrew Lunn
2021-06-07 7:55 ` Oleksij Rempel
2021-06-04 13:42 ` [PATCH net-next v1 6/7] net: phy: do not print dump stack if device was removed Oleksij Rempel
2021-06-04 13:42 ` [PATCH net-next v1 7/7] usbnet: run unbind() before unregister_netdev() Oleksij Rempel
2021-06-04 23:41 ` Andrew Lunn
2021-06-07 8:04 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210604134244.2467-6-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®