[PATCH] sr: Fix get the error media event code

[ManYi Li <limanyi@uniontech.com>]

Eject the specified slot or media through a mechanical switch on the Drive,
med->media_event_code is 3 not 1 in the sr_get_events().

If disk_flush_events() and sr_block_open() are called,
clearing is 1 or 3 in the sr_check_events(),then it report
DISK_EVENT_MEDIA_CHANGE not DISK_EVENT_EJECT_REQUEST.

If disk_flush_events() and sr_block_open() aren't called,
clearing is 0 in the sr_check_events(),then it doesn't
report any event.

Signed-off-by: ManYi Li <limanyi@uniontech.com>
---
 drivers/scsi/sr.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 482a07b662a9..94c254e9012e 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -220,6 +220,8 @@ static unsigned int sr_get_events(struct scsi_device *sdev)
 		return DISK_EVENT_EJECT_REQUEST;
 	else if (med->media_event_code == 2)
 		return DISK_EVENT_MEDIA_CHANGE;
+	else if (med->media_event_code == 3)
+		return DISK_EVENT_EJECT_REQUEST;
 	return 0;
 }
 
-- 
2.20.1