From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
Jakub Kicinski <kuba@kernel.org>,
Ben Hutchings <ben.hutchings@essensium.com>
Cc: <linux-kernel@vger.kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
<linux-omap@vger.kernel.org>, Lokesh Vutla <lokeshvutla@ti.com>,
<stable@vger.kernel.org>
Subject: [PATCH net] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
Date: Fri, 11 Jun 2021 16:27:32 +0300 [thread overview]
Message-ID: <20210611132732.10690-1-grygorii.strashko@ti.com> (raw)
The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net:
ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet
size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW
packed drop issue when packets are sent from Host to the port with PVID and
un-tagging enabled. Unfortunately this breaks some other non-switch
specific use-cases, like:
- [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the
packet
- [2] Some industrial protocols, which expects min TX packet size 60Bytes
(excluding FCS).
Fix it by configuring min TX packet size depending driver mode
- 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode
- 64Bytes (VLAN_ETH_ZLEN) for switch mode
[1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/
[2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669
Cc: Ben Hutchings <ben.hutchings@essensium.com>
Cc: stable@vger.kernel.org
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/net/ethernet/ti/cpsw_new.c | 12 +++++++++---
drivers/net/ethernet/ti/cpsw_priv.h | 4 +++-
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index 11f536138495..401909bff319 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -918,14 +918,17 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb,
struct cpts *cpts = cpsw->cpts;
struct netdev_queue *txq;
struct cpdma_chan *txch;
+ unsigned int len;
int ret, q_idx;
- if (skb_padto(skb, CPSW_MIN_PACKET_SIZE)) {
+ if (skb_padto(skb, priv->tx_packet_min)) {
cpsw_err(priv, tx_err, "packet pad failed\n");
ndev->stats.tx_dropped++;
return NET_XMIT_DROP;
}
+ len = skb->len < priv->tx_packet_min ? priv->tx_packet_min : skb->len;
+
if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
priv->tx_ts_enabled && cpts_can_timestamp(cpts, skb))
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
@@ -937,7 +940,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb,
txch = cpsw->txv[q_idx].ch;
txq = netdev_get_tx_queue(ndev, q_idx);
skb_tx_timestamp(skb);
- ret = cpdma_chan_submit(txch, skb, skb->data, skb->len,
+ ret = cpdma_chan_submit(txch, skb, skb->data, len,
priv->emac_port);
if (unlikely(ret != 0)) {
cpsw_err(priv, tx_err, "desc submit failed\n");
@@ -1100,7 +1103,7 @@ static int cpsw_ndo_xdp_xmit(struct net_device *ndev, int n,
for (i = 0; i < n; i++) {
xdpf = frames[i];
- if (xdpf->len < CPSW_MIN_PACKET_SIZE)
+ if (xdpf->len < priv->tx_packet_min)
break;
if (cpsw_xdp_tx_frame(priv, xdpf, NULL, priv->emac_port))
@@ -1389,6 +1392,7 @@ static int cpsw_create_ports(struct cpsw_common *cpsw)
priv->dev = dev;
priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG);
priv->emac_port = i + 1;
+ priv->tx_packet_min = CPSW_MIN_PACKET_SIZE;
if (is_valid_ether_addr(slave_data->mac_addr)) {
ether_addr_copy(priv->mac_addr, slave_data->mac_addr);
@@ -1686,6 +1690,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id,
priv = netdev_priv(sl_ndev);
slave->port_vlan = vlan;
+ priv->tx_packet_min = CPSW_MIN_PACKET_SIZE_VLAN;
if (netif_running(sl_ndev))
cpsw_port_add_switch_def_ale_entries(priv,
slave);
@@ -1714,6 +1719,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id,
priv = netdev_priv(slave->ndev);
slave->port_vlan = slave->data->dual_emac_res_vlan;
+ priv->tx_packet_min = CPSW_MIN_PACKET_SIZE;
cpsw_port_add_dual_emac_def_ale_entries(priv, slave);
}
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index a323bea54faa..2951fb7b9dae 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -89,7 +89,8 @@ do { \
#define CPSW_POLL_WEIGHT 64
#define CPSW_RX_VLAN_ENCAP_HDR_SIZE 4
-#define CPSW_MIN_PACKET_SIZE (VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE_VLAN (VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE (ETH_ZLEN)
#define CPSW_MAX_PACKET_SIZE (VLAN_ETH_FRAME_LEN +\
ETH_FCS_LEN +\
CPSW_RX_VLAN_ENCAP_HDR_SIZE)
@@ -380,6 +381,7 @@ struct cpsw_priv {
u32 emac_port;
struct cpsw_common *cpsw;
int offload_fwd_mark;
+ u32 tx_packet_min;
};
#define ndev_to_cpsw(ndev) (((struct cpsw_priv *)netdev_priv(ndev))->cpsw)
--
2.17.1
next reply other threads:[~2021-06-11 13:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 13:27 Grygorii Strashko [this message]
2021-06-11 17:54 ` Ben Hutchings
2021-06-11 20:52 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611132732.10690-1-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=ben.hutchings@essensium.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®