From: Alex Elder <elder@linaro.org>
To: subashab@codeaurora.org, stranche@codeaurora.org,
davem@davemloft.net, kuba@kernel.org
Cc: bjorn.andersson@linaro.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 7/8] net: qualcomm: rmnet: avoid unnecessary byte-swapping
Date: Fri, 11 Jun 2021 14:05:28 -0500 [thread overview]
Message-ID: <20210611190529.3085813-8-elder@linaro.org> (raw)
In-Reply-To: <20210611190529.3085813-1-elder@linaro.org>
Internet checksums are used for IPv4 header checksum, as well as TCP
segment and UDP datagram checksums. Such a checksum represents the
negated sum of adjacent pairs of bytes, using ones' complement
arithmetic.
One property of the Internet checkum is byte order independence [1].
Specifically, the sum of byte-swapped pairs is equal to the result
of byte swapping the sum of those same pairs when not byte-swapped.
So for example if a, b, c, d, y, and z are hexadecimal digits, and
PLUS represents ones' complement addition:
If: ab PLUS cd = yz
Then: ba PLUS dc = zy
For this reason, there is no need to swap the order of bytes in the
checksum value held in a message header, nor the one in the QMAPv4
trailer, in order to operate on them.
In other words, we can determine whether the hardware-computed
checksum matches the one in the message header without any byte
swaps.
(This patch leaves in place all existing type casts.)
[1] https://tools.ietf.org/html/rfc1071
Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
index 4f93355e9a93a..39f198d7595bd 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
@@ -78,15 +78,15 @@ rmnet_map_ipv4_dl_csum_trailer(struct sk_buff *skb,
* trailer checksum. Therefore the checksum in the trailer is
* just the checksum computed over the IP payload.
*/
- ip_payload_csum = (__force __sum16)~ntohs(csum_trailer->csum_value);
+ ip_payload_csum = (__force __sum16)~csum_trailer->csum_value;
pseudo_csum = ~csum_tcpudp_magic(ip4h->saddr, ip4h->daddr,
ntohs(ip4h->tot_len) - ip4h->ihl * 4,
ip4h->protocol, 0);
- addend = (__force __be16)ntohs((__force __be16)pseudo_csum);
+ addend = (__force __be16)pseudo_csum;
pseudo_csum = csum16_add(ip_payload_csum, addend);
- addend = (__force __be16)ntohs((__force __be16)*csum_field);
+ addend = (__force __be16)*csum_field;
csum_temp = ~csum16_sub(pseudo_csum, addend);
csum_value_final = (__force u16)csum_temp;
@@ -105,7 +105,7 @@ rmnet_map_ipv4_dl_csum_trailer(struct sk_buff *skb,
}
}
- if (csum_value_final == ntohs((__force __be16)*csum_field)) {
+ if (csum_value_final == (__force u16)*csum_field) {
priv->stats.csum_ok++;
return 0;
} else {
--
2.27.0
next prev parent reply other threads:[~2021-06-11 19:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 19:05 [PATCH net-next 0/8] net: qualcomm: rmnet: MAPv4 download checksum cleanup, part 1 Alex Elder
2021-06-11 19:05 ` [PATCH net-next 1/8] net: qualcomm: rmnet: use ip_is_fragment() Alex Elder
2021-06-11 19:05 ` [PATCH net-next 2/8] net: qualcomm: rmnet: eliminate some ifdefs Alex Elder
2021-06-11 19:05 ` [PATCH net-next 3/8] net: qualcomm: rmnet: get rid of some local variables Alex Elder
2021-06-11 19:05 ` [PATCH net-next 4/8] net: qualcomm: rmnet: simplify rmnet_map_get_csum_field() Alex Elder
2021-06-11 19:05 ` [PATCH net-next 5/8] net: qualcomm: rmnet: IPv4 header has zero checksum Alex Elder
2021-06-11 19:05 ` [PATCH net-next 6/8] net: qualcomm: rmnet: clarify a bit of code Alex Elder
2021-06-11 19:05 ` Alex Elder [this message]
2021-06-11 19:05 ` [PATCH net-next 8/8] net: qualcomm: rmnet: avoid unnecessary IPv6 byte-swapping Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611190529.3085813-8-elder@linaro.org \
--to=elder@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stranche@codeaurora.org \
--cc=subashab@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®