[PATCH] clk: at91: clk-generated: Limit the requested rate to our range

[Codrin Ciubotariu <codrin.ciubotariu@microchip.com>]

On clk_generated_determine_rate(), the requested rate could be outside
of clk's range. Limit the rate to the clock's range to not return an
error.

Fixes: df70aeef6083 ("clk: at91: add generated clock driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
 drivers/clk/at91/clk-generated.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index b4fc8d71daf2..b656d25a9767 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -128,6 +128,12 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 	int i;
 	u32 div;
 
+	/* do not look for a rate that is outside of our range */
+	if (gck->range.max && req->rate > gck->range.max)
+		req->rate = gck->range.max;
+	if (gck->range.min && req->rate < gck->range.min)
+		req->rate = gck->range.min;
+
 	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
 		if (gck->chg_pid == i)
 			continue;
-- 
2.30.2