mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Stefan Riedmueller <s.riedmueller@phytec.de>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 5/6] media: dt-bindings: mt9p031: Convert bindings to yaml
Date: Thu, 8 Jul 2021 11:19:21 +0200	[thread overview]
Message-ID: <20210708091922.5508-6-s.riedmueller@phytec.de> (raw)
In-Reply-To: <20210708091922.5508-1-s.riedmueller@phytec.de>

Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 .../bindings/media/i2c/aptina,mt9p031.yaml    | 75 +++++++++++++++++++
 .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ----------
 MAINTAINERS                                   |  1 +
 3 files changed, 76 insertions(+), 40 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt

diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..7de62e339895
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 2592H x 1944V. It is programmable through a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    addittionalProeprties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency: true
+          pixel-clock-frequency: true
+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        }:
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
-	(a) "aptina,mt9p031" for mt9p031 sensor
-	(b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		mt9p031@5d {
-			compatible = "aptina,mt9p031";
-			reg = <0x5d>;
-			reset-gpios = <&gpio3 30 0>;
-
-			port {
-				mt9p031_1: endpoint {
-					input-clock-frequency = <6000000>;
-					pixel-clock-frequency = <96000000>;
-				};
-			};
-		};
-		...
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index c7456776ace5..f2123226baae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12610,6 +12610,7 @@ M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
 F:	drivers/media/i2c/mt9p031.c
 F:	include/media/i2c/mt9p031.h
 
-- 
2.25.1


  parent reply	other threads:[~2021-07-08  9:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-08  9:19 [PATCH v4 0/6] media: mt9p031: Read back the real clock rate Stefan Riedmueller
2021-07-08  9:19 ` [PATCH v4 1/6] " Stefan Riedmueller
2021-07-08  9:19 ` [PATCH v4 2/6] media: mt9p031: Make pixel clock polarity configurable by DT Stefan Riedmueller
2021-07-08  9:19 ` [PATCH v4 3/6] media: mt9p031: Fix corrupted frame after restarting stream Stefan Riedmueller
2021-07-08  9:19 ` [PATCH v4 4/6] media: mt9p031: Use BIT macro Stefan Riedmueller
2021-07-08  9:19 ` Stefan Riedmueller [this message]
2021-07-08 11:23   ` [PATCH v4 5/6] media: dt-bindings: mt9p031: Convert bindings to yaml Sakari Ailus
2021-07-08 13:34     ` Stefan Riedmüller
2021-07-08 14:02       ` sakari.ailus
2021-07-12  8:28         ` Stefan Riedmüller
2021-07-08  9:19 ` [PATCH v4 6/6] media: dt-bindings: mt9p031: Add missing required properties Stefan Riedmueller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210708091922.5508-6-s.riedmueller@phytec.de \
    --to=s.riedmueller@phytec.de \
    --cc=devicetree@vger.kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®