From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Subject: [PATCH] staging: r8188eu: include: Remove unused const definitions
Date: Mon, 2 Aug 2021 03:10:25 +0200 [thread overview]
Message-ID: <20210802011025.23887-1-fmdefrancesco@gmail.com> (raw)
Remove unused const definitions. Issues detected by sparse. Remove the
'#ifdef' and '#endif' preprocessor directives that surround them.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---
.../staging/r8188eu/include/rtw_mp_ioctl.h | 77 -------------------
1 file changed, 77 deletions(-)
diff --git a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
index e856fd0ad036..0376ddbf6011 100644
--- a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
+++ b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
@@ -135,83 +135,6 @@ int rtl8188eu_oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv);
int rtl8188eu_oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv);
int rtl8188eu_oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv);
-#ifdef _RTW_MP_IOCTL_C_
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_00[] = {
- {1, &oid_null_function}, /* 0x00 OID_RT_PRO_RESET_DUT */
- {1, &rtl8188eu_oid_rt_pro_set_data_rate_hdl}, /* 0x01 */
- {1, &rtl8188eu_oid_rt_pro_start_test_hdl}, /* 0x02 */
- {1, &rtl8188eu_oid_rt_pro_stop_test_hdl}, /* 0x03 */
- {1, &oid_null_function}, /* 0x04 OID_RT_PRO_SET_PREAMBLE */
- {1, &oid_null_function}, /* 0x05 OID_RT_PRO_SET_SCRAMBLER */
- {1, &oid_null_function}, /* 0x06 OID_RT_PRO_SET_FILTER_BB */
- {1, &oid_null_function},/* 0x07 OID_RT_PRO_SET_MANUAL_DIVERSITY_BB */
- {1, &rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl}, /* 0x08 */
- {1, &oid_null_function},/* 0x09 OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL */
- {1, &oid_null_function},/* 0x0A OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL */
- {1, &rtl8188eu_oid_rt_pro_set_continuous_tx_hdl}, /* 0x0B OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL */
- {1, &rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl},/* 0x0C OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS */
- {1, &oid_null_function}, /* 0x0D OID_RT_PRO_SET_TX_ANTENNA_BB */
- {1, &rtl8188eu_oid_rt_pro_set_antenna_bb_hdl}, /* 0x0E */
- {1, &oid_null_function}, /* 0x0F OID_RT_PRO_SET_CR_SCRAMBLER */
- {1, &oid_null_function}, /* 0x10 OID_RT_PRO_SET_CR_NEW_FILTER */
- {1, &rtl8188eu_oid_rt_pro_set_tx_power_control_hdl},/* 0x11 OID_RT_PRO_SET_TX_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x12 OID_RT_PRO_SET_CR_TX_CONFIG */
- {1, &oid_null_function}, /* 0x13 OID_RT_PRO_GET_TX_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x14 OID_RT_PRO_GET_CR_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x15 OID_RT_PRO_SET_CR_SETPOINT */
- {1, &oid_null_function}, /* 0x16 OID_RT_PRO_SET_INTEGRATOR */
- {1, &oid_null_function}, /* 0x17 OID_RT_PRO_SET_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x18 OID_RT_PRO_GET_INTEGRATOR */
- {1, &oid_null_function}, /* 0x19 OID_RT_PRO_GET_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x1A OID_RT_PRO_QUERY_EEPROM_TYPE */
- {1, &oid_null_function}, /* 0x1B OID_RT_PRO_WRITE_MAC_ADDRESS */
- {1, &oid_null_function}, /* 0x1C OID_RT_PRO_READ_MAC_ADDRESS */
- {1, &oid_null_function}, /* 0x1D OID_RT_PRO_WRITE_CIS_DATA */
- {1, &oid_null_function}, /* 0x1E OID_RT_PRO_READ_CIS_DATA */
- {1, &oid_null_function} /* 0x1F OID_RT_PRO_WRITE_POWER_CONTROL */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_20[] = {
- {1, &oid_null_function}, /* 0x20 OID_RT_PRO_READ_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x21 OID_RT_PRO_WRITE_EEPROM */
- {1, &oid_null_function}, /* 0x22 OID_RT_PRO_READ_EEPROM */
- {1, &rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl}, /* 0x23 */
- {1, &rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl}, /* 0x24 */
- {1, &rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl}, /* 0x25 */
- {1, &rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl}, /* 0x26 */
- {1, &rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl}, /* 0x27 */
- {1, &oid_null_function}, /* 0x28 OID_RT_PRO_QUERY_CURRENT_ADDRESS */
- {1, &oid_null_function}, /* 0x29 OID_RT_PRO_QUERY_PERMANENT_ADDRESS */
- {1, &oid_null_function}, /* 0x2A OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS */
- {1, &rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl},/* 0x2B OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX */
- {1, &oid_null_function}, /* 0x2C OID_RT_PRO_RECEIVE_PACKET */
- {1, &oid_null_function}, /* 0x2D OID_RT_PRO_WRITE_EEPROM_BYTE */
- {1, &oid_null_function}, /* 0x2E OID_RT_PRO_READ_EEPROM_BYTE */
- {1, &rtl8188eu_oid_rt_pro_set_modulation_hdl} /* 0x2F */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_40[] = {
- {1, &oid_null_function}, /* 0x40 */
- {1, &oid_null_function}, /* 0x41 */
- {1, &oid_null_function}, /* 0x42 */
- {1, &rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl}, /* 0x43 */
- {1, &oid_null_function}, /* 0x44 */
- {1, &oid_null_function} /* 0x45 */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_80[] = {
- {1, &oid_null_function}, /* 0x80 OID_RT_DRIVER_OPTION */
- {1, &oid_null_function}, /* 0x81 OID_RT_RF_OFF */
- {1, &oid_null_function} /* 0x82 OID_RT_AUTH_STATUS */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_85[] = {
- {1, &rtl8188eu_oid_rt_wireless_mode_hdl} /* 0x00 OID_RT_WIRELESS_MODE */
-};
-
-#endif /* _RTL871X_MP_IOCTL_C_ */
-
struct rwreg_param {
u32 offset;
u32 width;
--
2.32.0
next reply other threads:[~2021-08-02 1:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-02 1:10 Fabio M. De Francesco [this message]
2021-08-05 10:49 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802011025.23887-1-fmdefrancesco@gmail.com \
--to=fmdefrancesco@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®