mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: "David S. Miller" <davem@davemloft.net>, <netdev@vger.kernel.org>,
	Jakub Kicinski <kuba@kernel.org>,
	Ben Hutchings <ben.hutchings@essensium.com>
Cc: <linux-kernel@vger.kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	<linux-omap@vger.kernel.org>, Lokesh Vutla <lokeshvutla@ti.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	<stable@vger.kernel.org>
Subject: [PATCH net v2] net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-cases
Date: Thu, 5 Aug 2021 17:55:11 +0300	[thread overview]
Message-ID: <20210805145511.12016-1-grygorii.strashko@ti.com> (raw)

The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net:
ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet
size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW
packed drop issue when packets are sent from Host to the port with PVID and
un-tagging enabled. Unfortunately this breaks some other non-switch
specific use-cases, like:
- [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the
packet
- [2] Some industrial protocols, which expects min TX packet size 60Bytes
(excluding FCS).

Fix it by configuring min TX packet size depending on driver mode
 - 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode
 - 64Bytes (VLAN_ETH_ZLEN) for switch mode
and update it during driver mode change and annotate with
READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing.

[1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/
[2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669


Cc: stable@vger.kernel.org
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Reported-by: Ben Hutchings <ben.hutchings@essensium.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---

Changes in v2:
- use skb_put_padto
- update description
- annotate tx_packet_min with READ_ONCE()/WRITE_ONCE()

I'm not going to add additional changes in cpdma configuration interface and, 
instead, will send patches to convert all cpdma users to use skb_put_padto() and
drop frames padding from cpdma.

v1: https://patchwork.kernel.org/project/netdevbpf/patch/20210611132732.10690-1-grygorii.strashko@ti.com/

 drivers/net/ethernet/ti/cpsw_new.c  | 7 +++++--
 drivers/net/ethernet/ti/cpsw_priv.h | 4 +++-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index ae167223e87f..d904f4ca4b37 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -921,7 +921,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb,
 	struct cpdma_chan *txch;
 	int ret, q_idx;
 
-	if (skb_padto(skb, CPSW_MIN_PACKET_SIZE)) {
+	if (skb_put_padto(skb, READ_ONCE(priv->tx_packet_min))) {
 		cpsw_err(priv, tx_err, "packet pad failed\n");
 		ndev->stats.tx_dropped++;
 		return NET_XMIT_DROP;
@@ -1101,7 +1101,7 @@ static int cpsw_ndo_xdp_xmit(struct net_device *ndev, int n,
 
 	for (i = 0; i < n; i++) {
 		xdpf = frames[i];
-		if (xdpf->len < CPSW_MIN_PACKET_SIZE)
+		if (xdpf->len < READ_ONCE(priv->tx_packet_min))
 			break;
 
 		if (cpsw_xdp_tx_frame(priv, xdpf, NULL, priv->emac_port))
@@ -1390,6 +1390,7 @@ static int cpsw_create_ports(struct cpsw_common *cpsw)
 		priv->dev  = dev;
 		priv->msg_enable = netif_msg_init(debug_level, CPSW_DEBUG);
 		priv->emac_port = i + 1;
+		priv->tx_packet_min = CPSW_MIN_PACKET_SIZE;
 
 		if (is_valid_ether_addr(slave_data->mac_addr)) {
 			ether_addr_copy(priv->mac_addr, slave_data->mac_addr);
@@ -1698,6 +1699,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id,
 
 			priv = netdev_priv(sl_ndev);
 			slave->port_vlan = vlan;
+			WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE_VLAN);
 			if (netif_running(sl_ndev))
 				cpsw_port_add_switch_def_ale_entries(priv,
 								     slave);
@@ -1726,6 +1728,7 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id,
 
 			priv = netdev_priv(slave->ndev);
 			slave->port_vlan = slave->data->dual_emac_res_vlan;
+			WRITE_ONCE(priv->tx_packet_min, CPSW_MIN_PACKET_SIZE);
 			cpsw_port_add_dual_emac_def_ale_entries(priv, slave);
 		}
 
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index a323bea54faa..2951fb7b9dae 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -89,7 +89,8 @@ do {								\
 
 #define CPSW_POLL_WEIGHT	64
 #define CPSW_RX_VLAN_ENCAP_HDR_SIZE		4
-#define CPSW_MIN_PACKET_SIZE	(VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE_VLAN	(VLAN_ETH_ZLEN)
+#define CPSW_MIN_PACKET_SIZE	(ETH_ZLEN)
 #define CPSW_MAX_PACKET_SIZE	(VLAN_ETH_FRAME_LEN +\
 				 ETH_FCS_LEN +\
 				 CPSW_RX_VLAN_ENCAP_HDR_SIZE)
@@ -380,6 +381,7 @@ struct cpsw_priv {
 	u32 emac_port;
 	struct cpsw_common *cpsw;
 	int offload_fwd_mark;
+	u32 tx_packet_min;
 };
 
 #define ndev_to_cpsw(ndev) (((struct cpsw_priv *)netdev_priv(ndev))->cpsw)
-- 
2.17.1


             reply	other threads:[~2021-08-05 14:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05 14:55 Grygorii Strashko [this message]
2021-08-05 18:43 ` Grygorii Strashko
2021-08-09  9:20 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210805145511.12016-1-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=ben.hutchings@essensium.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®